Static Equipments freelance

Well versed in planning with exceptional problem solving and troubleshooting skills seeking a position in which these skills can be utilized and enhanced for betterment. Adept in carefully diagnosing and assessing issues and offering viable solutions.

Engineer

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Bachelor’s Degree in Mechanical Engineering, with extensive experience in asset integrity and inspection. Certified as an API 510 Pressure Vessel Inspector and API 570 Piping Inspector, I bring a strong background in non-destructive testing (NDT) techniques. I am proficient in interpreting technical drawings and conducting thorough inspections of both offshore and onshore static equipment. My expertise includes evaluating the condition of static assets, recommending corrective actions, coordinating NDT activities, overseeing repair works, and compiling detailed reports using asset integrity management systems. Well-versed in international construction and inspection codes, including API and ASME standards, I am eager to apply my skills and knowledge to ensure the integrity and reliability of static equipment and structures within a dynamic engineering team. 

Inspector

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

A mechanical engineering graduate now working as project engineer. Come with technical skills such as technical and commercial proposals, project management, planning, scheduling, fabrication, cost controlling and also design. Familiar with standards from ASME, API, PETRONAS and ExxonMobil. Have experience dealing with quality control, procurement process and managing sub-contractors and also vendors. Also been exposed with several soft skills development such as teamwork, leadership and professional communication. Aspiring to seek for career advancement in the industry.

Engineer, Inspector

Graduate in mechanical engineering with 2 years of professional experience in piping of EPC projects like petrochemical plants, thermal power plant, and chemical plant, and 5 years in mechanical packages design (static and rotating) for oil & gas applications. Familiar with various types of welding processes, welding electrodes, welding electrode selection, WPS, PQR, NDT, PWHT, P91 welding, Induction heating machine. Experienced in overhauling centrifugal and reciprocating pumps, and a successful package engineer in delivery of various mechanical skid packages. Solid command of technologies, tools and best practices in designing mechanical equipment using AutoCAD and engineering drawings. Strong team collaboration skills, highly organized, prioritizes communication, and able to implement analysis and evaluation skills.

Engineer

Well organized and motivated piping engineer with a demonstrated ability to work in high stress condition, skilled individual with experience over 10+ years in engineering design of piping/ pipelines. Handles various projects including piping for power plant, industrial, chemical and oil & gas industries.

Engineer

Mechanical Engineer with 20 years of experience in Boiler, Furnace and Static equipment Design, Installation, Construction and Pre-Commissioning till Handover to Client. Technical review of method statements for lifting and installation of equipment’s, other procedures as per the client requirement. Review of 3D drawings of overall layout and performed clash check and maintenance integrity by superimposing all other discipline models.

Engineer

Having experience more than 10 (Ten) years in Inspection & Quality Control including supervision & coordination, inspection and responsible for general quality control activities to confirm that they comply with specified procedure or Client requirement. Having experiences of job covering in QA / QC as Welding Inspector , NDT Inspector are in fabrication , erection and installation of piping fabrication installation of various material ( CS, SS, Duplex , FRP , PVC ) , pipeline fabrication installation both onshore & Offshore

Inspector

My name is Bambang Aldhi Satrio Heriyono and I graduated from Institut Teknologi Nasional Bandung with a bachelor's degree in Mechanical Engineering. I have more than 15 years of experience as a QAQC Coordinator/ QAQC Engineer/ QAQC Inspector (with Welding, Mechanical, Piping, Structure and Tank construction activity) in Power Plants, Oil and Gas, and Mining projects and a valid qualification for International Welding Engineer, Welding Inspector-CSWIP 3.1, Welding Inspector-B4T, NDT ASNT-TC-1A Level II of UT/MT/PT, Radiographic Interpreter and Corrosion Inspector.

Inspector, Supervisor / Technician, Other

* More than 11 years of experience across India, Abu Dhabi, Iraq, Oman, Kuwait & Qatar as Piping Engineer, Piping Supervisor, Construction Supervisor in executing Oil & Gas projects. * Worked on fabrication & erection activities of U/G & A/G piping, CS, SS, LTCS & as in live and new plant. * Worked for Piping, Structure, Equipment, Cladding and all Mechanical related work. * Proficient with Eng. codes & specifications like ASME B.31.3, B.31.1, ASME-16.5 NACE standards * Rich experience of preparing piping related drawings like isometric, general arrangement, P&ID, pipe support drawings, plan, plant smart viewer (3D) and structure drawings * Perform piping Line Check and writing punch list then carrying out A punch clearing work prior to hydro test. * Supervised & led teams, allocated work profiles, prepared various reports and reported to the management & client. * Successfully led completion of projects MEGA TURN AROUND 2021 EP1 Machine Replacement Shutdown Project (QAPCO) Mesaieed, Doha Qatar, Kuwait New Refinery Project Package-5 Al-Zour (KNRP) Kuwait, Sohar Refinery Improvement Project (SRIP) Oman, Central Processing Facility (CPF) Badra Oil Field Iraq, Asab F F D Project Abu Dhabi (UAE) * Erection and alignment of fractionation columns, stripper column, sweetening and stabilization column, sour water stripper column and Amine regeneration column, Compressor, Turbine, Exchanger, Condenser, Pumps and Lube oil skid. * Erection and alignment of flare HP and LP knock out drums, slag catcher, water draw of vessels, electrostatic deserters, stage separators, fin-fan coolers, heat exchangers, purge bins, instrument air and plant air receivers, degassing gas boots, fuel gas scrubber, nitrogen purification vessel. * Supervise for installation of 1.6 KM onshore and 1.7 KM offshore Sulphur Belt Conveyor System including main Conveyor structure, 5 Transfer Tower structure, Magnetic Separator, Elevated Gallery, Ship loader and all Cladding work. * Skilled in executing piping erection, punch listing, hydro testing, and commissioning activities of complete piping system. * Collaborated with cross-functional teams to ensure completion of project. * Excellent communication & interpersonal skills with strong analytical, problem-solving, and organizational capabilities

Engineer, Superintendent, Supervisor / Technician, Inspector, Other

I have more than 12 (twelve) years of working experiences combined as a Mechanical & Piping Engineer with comprehensive knowledge of piping-mechanical static design and construction. I have been assigned in FEED, various proposals & EPC project executions for Oil & Gas, Petrochemical, Fertilizer and Power Plant industries. I have been involved in : + Project start stage activity such as determining stress calculation line, scheduling and planning distribution work load for engineer and other preparation work. + Basic engineering stage activity such as prepare datasheet, preliminary loading data, specification and other technical data. + Before PO stage activity namely; performing Technical Requisition for request vendor technical and commercial quotation, TQ before PO and Technical Bid Evaluation. + After PO stage activity i.e. ; Engineering detail design phase, verifying vendor prints and equipment calculations, interdisciplinary coordination. + Construction phase such as subcont assessment, reviewing vendor print, review and approve all construction work & inspections.

Engineer

Detail-oriented mechanical & piping engineer with 2 years of experience in oil & gas industry. Proven ability to manage and contribute to design, stress analysis, and layout of piping systems while ensuring compliance with industry standards and maximize safety.

Engineer

I was a man with background from Mechanical Engineering. Have experience in Construction Project in Plant, Factory, Ship Yard and Oil & Gas.A highly motivated and dynamic individual, creative, fully of ideas and intention toward improvements, capable to work independently and as a team either.Easily to communicate among all levels of people good team player and multitasking capabilities. Familiar in using several kind of welding and measurement tools, tensioning and bolting. 

Inspector, Supervisor / Technician

An adroit Sr QA/QC Manager and Quality/Technical Lead Auditor/ Quality Control Coordinator (QCC) professional with 19 years of rich in hand working experience

Engineer, Manager, Superintendent

Material Management, Logistic, Procurement & Contract   Supply Chain Management- Materials Management, Logistics, Procurement, Contract. I have 22 years strong knowledge in Supply Chain Management with (PSC) Major Operator company (Shell, Exxonmobil) in Oil & Gas industry, Semiconductor Tools Install Construction.   25 years of Oil & Gas experiences, 22 years in Supply Chain Management > Contract & Procurement Engineering, Materials Management - BOM Cataloguing, Logistical Management for ; -  Rejuvenation Project Team, construction, Maintenance & Drilling, both Upstream, Downstream and Mining Minerals, Operation Equipment's Maintenance, Semiconductor- Tools Install Construction (Intel Technologies) and Construction HUC.     20 years of experiences, I am involving in International Project 12 Mega Rejuvenations Construction & Fabrication Topside, LQ – Living Quarters & Jackets Project, From Procurement & Materials BOM to Support the Maintenance team for Production Platform & Refineries, EPCC Refineries Construction Projects, Intel Technologies Construction project, 16 Wells in Drilling Campaign Projects in Malaysia, also the regional campaign & project, 4 Wells with SPEX (SHELL) Philippines, Mining in South Africa, Brazil, From Procurement & Materials to support Major Equipment's Maintenance at Al Hons Gas, Abu Dhabi, UAE, and liaise with others International Manufacturer and vendors Companies across the countries. Supply Chain Management with emphasis on Leading team for Material Management for BOM Plant Maintenance & Cataloguing, SAP MM, WMS, SCM & PM, Maximo MM, WMS, SCM & PM, Materials MTO for construction, Logistics shipment & airfreight in Custom liaison, Procurements costing estimation, planning strategy, Lead team in Base, Materials BOM verification specification & Materials QA/QC inspection & FAT (Factory Acceptance Test), Tendering, Bidding and Contract Committee/Panel - Contract negotiation spare part, Piping, Structure, E&I, Mechanical Static & Rotating maintenance materials planning, Drilling Material & Equipment, Material Tracking. Providing materials services, CMMS, BOM Cataloguing and Asset Material Registration in Plant Maintenance AND using the Petronas Inventory PTCAM & PPGUA. MESC, SWECs CODE standards

Engineer, Manager, Other

With 10 years of experience working in Oil/Gas/Petrochemical/Refinery and Power Plant industry and focusing as an API Plant Inspector and highly competent in performing an inspection of static equipment such as Pressure vessel inspection (API 510) and Piping Inspection (API 570) including prefabrication welding works in the field of the oil & gas industry in Malaysia.

Engineer, Inspector

QA/QC Manager / Welding Inspector / Mechanical Supervisor / HSE Inspector Comprehensive experience in QA/QC for +15 years, including the management of welding/welders activities, heavy equipment (vessels, tanks, steel structures), and document systems. Exceptional attention to detail and ability to identify necessary corrective actions and nonconformity issues. Background includes successful project completions in Poland, Germany, Spain, Netherlands, Belgium, Lithuania, Finland, Ukraine and Russia.

Inspector, Manager, Translator, Supervisor / Technician

I am writing to put myself forward for the role of Mechanical Maintenance. As you can see from my CV, I have many skills pertinent to this role gained from various sectors, I wish to move into Your group, Because of my Career Development .The skills that I have and believe to be highly relevant to this job and your company/include. During my career . I have had many successes, Additionally, I have undertaken qualifications/training/voluntary work/research/name effort in destination career and believe my unique blend of skills can offer a great deal. I am confident that I possess the attributes you're looking for and that my experiences gained in my previous organizations, would provide invaluable insight and capability to your I would welcome the opportunity to discuss my application in person.

Supervisor / Technician

I am a Construction Lead Engineer/Supervisor for Piping, Mechanical and Structural for various EPC oil and gas projects, in FPSO-turret modules, Bouy/Turret STO modules & Subsea Riser base modules, Jacket Leg/Well Head Platform and Production Topside Modules, highly experience in fabrication, installation, quality control & testing, mechanical completion and pre-commissioning of Piping system, Structural steel sub-assembly modules, static & rotating mechanical equipment package installation. Familiar in the Rules and Regulations of the offshore & petroleum standard and classification society, such as: AWS, ASME, ASME B31.3, NORSOK piping & structural standard, classification society (DNV-GL, NV, BV, ABS) and industry codes.

iPMT/PMC Lead Static Equipment Engineer, holding IEng status registered with Engineers Council in the UK, a member of Institution of Mechanical Engineer (IMechE), a Professional member of Energy Institute (MEI), a member of Association for Material Protection and Performance (AMPP), with rich experience gaining from working overseas in multinational environment for reputed Consultancy firms and EPC Contractors on various projects at different phases from FEED to EPC followed at field engineering, covered both onshore and offshore, nearshore, greenfield and brownfield (revamping and conversion projects) across Refinery (intensive, various units), Petrochemical (PP, PE, Naptha cracking, Olefin), Gas Processing Plants GPP, Chemical plant, LNG, FPSO and Wellhead Platform. I have an impressive command of international codes and standards such as API, ASME, ASTM, NACE, TEMA, well versed in static equipment design, have basic knowledge of fired heater. rotating and package equipment, damage mechanisms and corrosion, able to perform thermal design, optimization and selection type of shell & tube heat exchanger using Aspen EDR. The equipment I have been working with ranging from low to high pressure and temperature, thin to thick wall, small to large size, constructed of carbon steel, carbon steel and cladding, carbon steel and refractory lining, low and high alloy, stainless steel and duplex and sour service. I am involved in 4 major projects (2.5~ 5.5 billions dollars) within 5 years in 3 countries since 2019 as a Lead Engineer.

Engineering, Field Operation & Maintenance

Engineer

A Project Management Professional with 9 years experience handling both onshore and offshore projects throughout the project life cycle from Front End Loading until Commissioning and Handover.

Engineer, Manager

A highly motivated professional with over 19 years of experience in Water and Wastewater Management, Chemical Treatment, Product Manufacturing and the Oil & Gas sectors covering for Inspection, Asset Integrity, Safety Relief, Pipeline and Corrosion Monitoring. Demonstrates strong leadership skills, a proven ability to execute projects efficiently under tight timelines, and a commitment to upholding safety and quality standards. Continuously improving knowledge and skills to effectively fulfill business needs.

Engineer, Supervisor / Technician