Static Equipments freelance

I have more than 16 years of experience in handling Piping and Pipeline scope for the EPC and Consultant Oil and Gas Company and Power Plant, and has been involved for Offshore and Onshore Oil and Gas Project, Petrochemical, 55 MW Geothermal Power plant project and 1760 MW Combined Cycle Gas Turbine Power Plant, and experience in complete passing all stage from Feasibility Study, FEED and Detail Engineering, Commissioning and Construction.

Engineer

With over 22 years of experience, I am a seasoned Senior Project Engineer specializing in analytical work. My expertise lies in successfully delivering projects that exceed client expectations. I excel in coordinating project estimates, conducting risk assessments, and creating technical drawings. I am deeply committed to being actively involved in all aspects of the project life cycle, ensuring the delivery of high-value projects. My strong leadership skills, coupled with my dedication and hard work, enable me to effectively manage stakeholder expectations. I have extensive experience in plant turnaround, major maintenance, project management, and organizational development within the Oil & Gas Industrial Projects sector. I am open to traveling and spending extended periods abroad, and I am currently seeking a suitable position with a market-leading company

Manager, Superintendent, Engineer, Other

Dynamic and goal-driven graduate engineer with under a year of experience, enthusiastic to leverage my expertise in a dynamic team environment. Acquired exposure in intricate problem-solving and engineering analysis, fueling my ambition to establish a sustainable career in the engineering sector while enhancing both technical and soft skills. Cultivated adaptability and a dedicated commitment to ongoing learning, readily embracing new challenges. Looking for an opportunity to learn and contribute my engineering knowledge and skills within the oil and gas industry.

Engineer

Civil Engineer with strong skills in Civil Engineering, Structural Design, Foundation Design, Detail Engineering Design, Front-End Engineering Design. Experienced in Oil & Gas, Petrochemical, Power Plant, Industrial, Power Transmission & Distribution sectors. High level leadership, organization, and management skills.

Engineer

My name is Bambang Aldhi Satrio Heriyono and I graduated from Institut Teknologi Nasional Bandung with a bachelor's degree in Mechanical Engineering. I have more than 15 years of experience as a QAQC Coordinator/ QAQC Engineer/ QAQC Inspector (with Welding, Mechanical, Piping, Structure and Tank construction activity) in Power Plants, Oil and Gas, and Mining projects and a valid qualification for International Welding Engineer, Welding Inspector-CSWIP 3.1, Welding Inspector-B4T, NDT ASNT-TC-1A Level II of UT/MT/PT, Radiographic Interpreter and Corrosion Inspector.

Inspector, Supervisor / Technician, Other

An engineering technology graduate, eager to leverage my academic foundation, strategic mindset, and interpersonal skills in a dynamic professional setting. Skilled in piping engineering and static and dynamics, honed through hands-on experience at PETRONAS and academic projects. Proven ability to conduct pipe stress analysis using Caesar II, develop engineering tools, and create insightful dashboards with Microsoft Power BI. Recognized for exceptional leadership in university sports clubs and awarded multiple Dean's List honours and a PETRONAS Focused Recognition Award. Eager to leverage technical skills and leadership experience to drive innovative solutions in the industry.

Engineer

Good team player, vast experience working in more than fifteen countries, able to perform in multirole assignment and wide range of inspection experience

Engineer, Inspector

I have approximately 12 years experience in the field of Static Equipment Mechanical design like Shell & Tube Heat Exchangers, Air Coolers, Screw Plug, Hairpin Exchangers, Plate and frame, finned shell and tube, Steam Coil Air Pre-Heater (SCAPH) and Pressure Vessel. I do Thermal Design of Air Cooled Heat Exchanger also. I have experience of SAUDI ARAMCO and ADNOC standards and working experience of various international Codes and standards like ASME, API, TEMA, etc and softwares like PVElite, Compress, Nozzle-Pro and HTRI. Moreover, I have experience in Offshore and Onshore as well as Green field and Brown field projects. Additionally, I have exposure to FEED, EPC as well as detailed design review work.

Engineer

With over 10 years of expertise in the oil and gas industry, I excel in QA/QC disciplines, having worked on projects for renowned companies. My mechanical engineering background and certifications, including Stationary and Rotary Equipment Inspector, underscore my proficiency. Adept at coordinating with diverse stakeholders, I ensure effective collaboration. I possess strong leadership skills, guiding teams to successful project completion with a focus on exceeding quality standards.

Inspector, Engineer

Dear Sir , My name is Antony Jegathees, as a Mechanical Tecnician, I have 14 years experience.

Supervisor / Technician

I am a senior techno-functional professional with 14+ years of experience in project management and technical support for mechanical engineering projects in the power plant, desalination plant & natural gas pipeline industries. My expertise lies in Industrial standards and International codes with proficiency in NDT analysis and techniques, Visual Welding Inspection, ASTM, ASME Sec I, Sec II, Sec V, Sec VIII, Sec IX, B31.1, B31.3, B31.8 & NFPA I have piloted mechanical engineering activities including erection, installation, fabrication, welding, painting, insulation, inspection, and hydro testing of power boilers, turbine-high/low-pressure piping, natural gas pipeline, and static and firefighting equipment. I have managed EPC project activities and developed and reviewed engineering schedules, progress reports, manpower forecasting, risk assessment and mitigation plans, and quality assurance. My key projects include 2800 MW-4*700 Sub critical boiler - Oil Fired in Rabigh, Saudi Arabia for SEC - Saudi Electricity Company; ARAMCO – Natural Gas Pipe Line, PRS Skid – Pressure Reducing Station in Dammam, Saudi Arabia; 3100 MW-5*620- Super critical Boiler-Power & Desalination Plant, MSF - 94,360 m3/day in Yanbu, Saudi Arabia for SWCC - Saline Water Conversion Corporation; 2892 MW-4*723 Supercritical boiler - Oil Fired in Jeddah, Saudi Arabia for SEC - Saudi Electricity Company; 32 & 22 TPH – Coal – Fired Boiler in Mumbai, India for Ruchi Soya Industries; and 3*200 MW and 4*500 MW Manufacturing of liners and engineered fabrication-India for L&T Ltd, Tata Power, and NTPC Projects. I have successfully completed the project control team's tasks for the power plant and desalination plant, ensuring all mechanical/piping work was completed to the highest standards. I have provided technical support for scope of work preparation, design reviews, and reverse engineering of existing plants, leading to cost reduction. I have responded to pre-bid clarifications and explained the scope of work to contractors, resulting in a smoother bidding process. I have also conducted yearly outage inspections in plant static equipment for all PMs Preventive Maintenance and CMs, Corrective Maintenance resulting in the reduction of maintenance costs. I hold a Diploma in Mechanical Engineering from Government Polytechnic College, Krishnagiri – Tamil Nadu, India For further information, please reach out to sasivaranqa05@gmail.com

Engineer, Inspector, Manager, Superintendent

Seeking for career growth in project management with a strong and supportive team, as well as to achieve my goal of obtaining professional certification. My expertise in these areas allows me to contribute effectively to project success and deliver high-quality results. My core skills are in project coordination, management and execution, sound knowledge in PTS, ASME, API, detail oriented in project scheduling using Microsoft Project & Primavera P6, analytical thinking in problem solving and forecasting project's bottleneck during project execution.

Engineer

* More than 10 years of experience across India, Abu Dhabi, Iraq, Oman, Kuwait & Qatar as Piping Engineer, Piping Supervisor, Construction Supervisor in executing Oil & Gas projects. * Worked on fabrication & erection activities of U/G & A/G piping, CS, SS, LTCS & as in live and new plant. * Worked for Piping, Structure, Equipment, Cladding and all Mechanical related work. * Proficient with Eng. codes & specifications like ASME B.31.3, B.31.1, ASME-16.5 NACE standards * Rich experience of preparing piping related drawings like isometric, general arrangement, P&ID, pipe support drawings, plan, plant smart viewer (3D) and structure drawings * Perform piping Line Check and writing punch list then carrying out A punch clearing work prior to hydro test. * Supervised & led teams, allocated work profiles, prepared various reports and reported to the management & client. * Successfully led completion of projects MEGA TURN AROUND 2021 EP1 Machine Replacement Shutdown Project (QAPCO) Mesaieed, Doha Qatar, Kuwait New Refinery Project Package-5 Al-Zour (KNRP) Kuwait, Sohar Refinery Improvement Project (SRIP) Oman, Central Processing Facility (CPF) Badra Oil Field Iraq, Asab F F D Project Abu Dhabi (UAE) * Erection and alignment of fractionation columns, stripper column, sweetening and stabilization column, sour water stripper column and Amine regeneration column, Compressor, Turbine, Exchanger, Condenser, Pumps and Lube oil skid. * Erection and alignment of flare HP and LP knock out drums, slag catcher, water draw of vessels, electrostatic deserters, stage separators, fin-fan coolers, heat exchangers, purge bins, instrument air and plant air receivers, degassing gas boots, fuel gas scrubber, nitrogen purification vessel. * Supervise for installation of 1.6 KM onshore and 1.7 KM offshore Sulphur Belt Conveyor System including main Conveyor structure, 5 Transfer Tower structure, Magnetic Separator, Elevated Gallery, Ship loader and all Cladding work. * Skilled in executing piping erection, punch listing, hydro testing, and commissioning activities of complete piping system. * Collaborated with cross-functional teams to ensure completion of project. * Excellent communication & interpersonal skills with strong analytical, problem-solving, and organizational capabilities

Engineer, Superintendent, Supervisor / Technician, Inspector, Other

A fast learner and a detail-oriented mechanical engineer with 1+ year of experience in a fast-paced biodiesel industry. Offers great problem-solving skills and ability to work well both independently and in a team. Actively seeking for new growth opportunities in entry-level engineering role.

Engineer

More than 15 years of work experience in fabrication, EPC, oilfield, mining inspection and several experiences in handling Migas and ISO certification. Experienced in develop QHSE Management System for company. Familiar with installations and inspection of Pressure Vessel, mechanical & piping works, electrical & instruments works at Oil & Gas, Mining, Industrial Plant and Data Center Projects.

Engineer, Inspector, Manager, Superintendent

*

Talented Mechanical Engineer and analytical problem-solver with over 12 years of experience managing front-line, Oil & Gas operations, Smelter Nickel operation, Refinery and Fractionation, Oleochemical Processing and Hydrogenation Plant. Efficiently maintain and repair Rotating and Static equipment. Coordinate resources and staff to handle any requirement.

Engineer

Aspiring to leverage my comprehensive mechanical training and honed skills within a dynamic professional setting, I am actively seeking a career opportunity where I can contribute significantly to my employer's success. With a steadfast commitment to hard work and a penchant for thriving in challenging environments, I am eager to immerse myself in tasks that foster personal and organizational growth. Furthermore, I am dedicated to continually expanding my knowledge base and fostering creativity, all with the overarching aim of achieving the strategic goals of the organization.

Engineer, Supervisor / Technician

A final year Mechanical Engineering student from Universiti Teknologi Malaysia (UTM) with a latest GPA of 3.95. Possessing knowledge, skills and experience in project management, manufacturing, fabrication, and effective collaboration gained during internship and project involvements throughout the studies. Motivated by a profound interest in the oil and gas industry especially in project-based operations, the opportunity as a Project Engineer is seen as an exceptional platform for skill development, experience acquisition, and knowledge enhancement.

Engineer, Drafter / Designer

Successful, highly motivated, technically skilled and result oriented Package Engineer with strong Mechanical Engineering background & overall 15+ yrs of extensive experience in EPC Projects of Oil & Gas industry. Handled projects involving Offshore Platforms, FPSO’s & Onshore fields

Engineer

I have experience about 31 (thirty-one) years include as Head of Department Mechanical Static and Package Engineering, as Lead Mechanical Static & Package Engineer, as Lead Combustion Engineer, as Principle Mechanical Engineer and as Mechanical Field Lead Engineer for Static equipment, Fired equipment and Package equipment for FEED, EPC Project mostly for Oil & Gas sector include LNG plant, Petrochemical plant for onshore and offshore plant (FLNG and FPU) facilities project.

Engineer, Manager, Superintendent

Years of Experience 20 Industries • LNG • Oil & Gas

Engineer, Manager

STATIC & PACKAGE MECHANICAL ENGINEER Remarkably accomplished and multi-tasking professional engineer with 30+ years of experience in mechanical engineering and project management. Exemplary work encompasses Onshore & Offshore Projects such as Canadian Oil Sands- Well Pads, & Upgraders, Refineries, Petrochemicals, NGL Projects, Polyethylene/Polypropylene project, Pharmaceuticals, and Gas plants. Armed with hands-on expertise in managing special materials which include solid and clad titanium, Inconel, duplex, and hardened chrome. Known for the ability to identify key operational issues and provide sound recommendations to ensure quick resolutions. Highly capable of working individually or collaboratively with various departments, businesses, and institutions to seamlessly achieve and exceed goals. Expertise in PV elite, Compress, Nozzle Pro, PV Elite & E- Tank. Worked on FEED and detailed engineering projects for various clients. Worked in conjunction with tech industry giants such as Shell, Exxon Mobile, UOP, and Union Carbide, BP, CNOOC, KNPC, PDO-Oman, and Saudi Aramco. Leader of U.S $70 million Co2 removal package for offshore gas Project and KNPC U&O project. Experience with Cryogenic service.

Engineer

Qualified Master and Bachelor Mechanical Engineering Degree with 30 years of Progressive Experienced in Offshore and Offshore FPSO & FLNG and Onshore Oil & Gas EPC Project Execution & Construction & Erection and Pre-Commissioning and Commissioning & Mechanical Installation & Start-up and Operation Support, Process & Mechanical & Instrument & Electrical and Cleaning, Flushing, Verifications, Leak Test, Performance Evaluation and Functional Test of Rotating Equipment’s Such as Gas Turbines and Centrifugal Gas Compressor & Reciprocating Gas Compressor & LNG – Mixed Refrigerant (MR) Compressor & Refrigeration Compressor & Boil Off Gas Compressor (BOG) & Positive Displacement Compressor and Condensate Removal (Flash Gas Compressor, Off Gas Compressor and Acid Gas/Mercury/Water Removal (Regeneration Compressor) and Centrifugal Pumps & Reciprocating & Plunger and Screw (small to large & working in low, moderate & high pressure manufactures pumps) Crude Oil Export Pump & Crude Oil Export Booster Pump & Crude Oil Transfer Pump and Crude Oil Feed Pump) & Positive Displacement Pumps and Condensate Recovery Unit (CRU) & Turbo Expander/Compressor and Reciprocating Gas Engines & Diesel Engine Generator Sets (DG Sets), Instrument & Plant Air Compressor & Nitrogen Generation Compressor & Various Types of Fans, Motors & Blowers & Gearboxes & Boiler and Other Rotating Equipment, etc. Rotating & Static Equipment’s and Balance of Plant (BOP) in Offshore and Offshore FPSO & FLNG and Onshore Oil & Gas Processing Plants & LNG/NGL & Power Plant, etc.

Engineer, Superintendent, Manager

Having more than 10 years of experience in QA/QC, Management System (ISO, ASME Certification, PED, SELO & EN ISO 3834-2), Inspection, Welding, NDT, Improvement, Auditor, Construction of Pressure Vessel, Tank, Ducting, Expansion Joint, Piping, Damper, Strainer, Silencer, Pump and Road Tanker Repair and construction of Stainless-Steel processing equipment for the Food, Beverages, Cosmetic & Pharmaceutical. More knowledge & familiarity with code of ASME, ASME BPE, ASTM, EN ISO 13445-4, EN 3834-2, AWS DI.I & API 110

Inspector