Certified Professional Electrical Engineer with experience for various proposals and projects, FEED (Front End Engineering Design), Detail Engineering & Project Execution such as oil & gas, power plant, substation, refinery, petrochemical, onshore and offshore, FPSO and LNG plants with value US $10K – $17Bio. In every project, apply standard engineering methods, international and local regulations, techniques, procedures, and design criteria. Possesses passion for working well , agile and skilful as a professional engineer in a multi-project. Expertise  * Experience in oil & gas infrastructure and facilities development, conceptual and FEED design through to detail design and construction in Offshore and onshore Mega greenfield and brownfield projects. * Engineering experience in design as Electrical Design Engineer and construction of electrical systems for upstream and downstream facilities including HV /MV electrical generation, transmission and distribution. * Perform and review electrical calculation and study such as cable sizing calculation, UPS calculation, load balance calculation, understanding of substations equipment selection and sizing, utilizing Power System software. * Well-versed with Engineering software such as ETAP, Dialux, CAD, Smartplant Electrical (SPEL), Smart plant Material (SPmat) / Marian, National and International Standards and Company specifications. 

Engineer, Superintendent, Manager

Electrical engineer with more than 12+ years of experience at Oil & Gas sector. Familiar with PTS, IEC, EX requirement on electrical package. Experience with Detail Design Engineering, Electrical inspection, Construction, Pre-commissioning & Commissioning. Has involve in EPCC, PCC, Brownfield, and Greenfield & Hook-up Commissioning.

Engineer

3+ years experience in electrical field in Oil and Gas (Onshore & Offshore) and EPC (Hydropower) company. Having relevant experience in maintenance, engineering, project development, and contract. Currently developing knowledge in steady state analysis such as Load Flow Analysis, Short Circuit Analysis, Motor Starting, Transient Stability, Protection Coordination, Arc Flash Studies and Harmonic Analysis using ETAP and DIgSILENT PowerFactory. Also for transient analysis in Insulation Coordination such as Temporary Overvoltage (TOV), Switching Front Overvoltage (SFO), Fast Front Overvoltage (FFO), Transient Recovery Voltage, Very Fast Transient Overvoltage (VFTO) using PSCAD/EMTDC. Familiar both national and international standards such as SPLN, IEC, NEMA, NEC, IEEE, ANSI and NFPA

Engineer

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Seeking a career in an organization that provides me an excellent opportunity for my entrepreneurial and productive thinking in the most demanding in QA/QC Piping, Welding, Static Equipment, Pipeline, Structure, Valve and Flange Management Inspection Professionals. I am willing to work in a progressive and challenging environment, which provides me opportunities for enhancing my knowledge and using my creative, technical and professional skills towards the fulfillment of the goal of the organization I am working for.

Engineer, Inspector

Multi-skilled project management professional with more than 22 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

I am Rely Mulja Setiawan, with bachelor’s degree in civil Engineer, self-motivated, willing to work in team, prefer to meet a challenge. I have been working for 15 years more with differences on construction of fabricator industries oil and gas (EPC) Company, working on various positions, Proposal Engineer, Estimator (Quantity Surveyor)/ Cost Estimator, Sales Marketing, Supply Chain management (Procurement Engineer), Project management, Cost Control Engineer and Project Documentation (QC Document Control). Excellent skill for estimate calculation direct or indirect cost (Material and Man-hour), MTO (Material Take Off) include cost material, labor cost, surface and painting area cost, NDT cost base on drawing or client specification or international codes (ASME, API etc.)

Engineer, Manager, Supervisor / Technician

Accomplished and reliable HSE Professional with over 15 years of rich experience and skills gained from projects in Nigeria, Oman, Kuwait, Libya, Afghanistan, and India in Onshore, Brownfield, Offshore, and Greenfield including construction Pipeline, Engineering, inspection, Commissioning, maintenance, Downstream and Shutdown Activities for various kinds of Projects in several well-reputed companies in the field of Engineering of Oil & Gas, LNG, Refinery / Power Plant, Construction of Industrial-Plant, World Wide, etc. I hold NEBOSH-IGC, IOSH, OSHA, Lead auditor ISO 45001/ ISO 14001 and STCW certifications, a Diploma in Mechanical Engineering, a Diploma in Fire and Safety Engineering & other certifications for HSE.

Supervisor / Technician, Superintendent, Inspector, Engineer

Mechanical Engineer with 5+ years of experience in EPC oil & gas projects specializing in Static & Rotating equipment design, selection, and engineering support for onshore and offshore applications. Strong background in centrifugal pumps, skid systems, API 650 tank, and vendor package engineering, including technical bid evaluation (TBE), vendor data review (VDR), FAT/SAT support, and installation engineering. Experienced in FEED and detailed engineering, with working knowledge of API, ASME, ISO, and PTS standards. Proven ability to coordinate across disciplines and deliver practical engineering solutions aligned with project specifications.

Engineer

Dear Hiring Manager,   I am writing to express my interest in the current position at your company. With over 9 years of experience in project engineering and client relationship management within the oil and gas and marine sectors, I am excited about the opportunity to contribute my skills and expertise to your esteemed company.   In my current role as a Project Engineer at ADC Energy Ltd, I have successfully driven sales initiatives that resulted in substantial revenue growth and increased market share. My strong technical background, coupled with my ability to build and maintain client relationships, has enabled me to identify and capitalize on emerging market trends and opportunities. I am adept at conducting thorough market analysis, developing strategic sales plans, and delivering customized solutions that address clients' needs.   My experience at Pronal Sdn Bhd has further solidified my proficiency in managing complex sales cycles and leading cross-functional teams to achieve project objectives. By fostering collaborative relationships with stakeholders and delivering on promises, I have consistently exceeded sales targets and contributed to overall business growth. My commitment to understanding customer pain points has allowed me to tailor solutions that not only meet but exceed expectations, enhancing customer satisfaction and loyalty.   Holding an MBA in General Management and a degree in Electrical & Electronics Engineering, I bring a unique blend of technical knowledge and sales acumen to the table. I am eager to leverage my expertise in the marine industry to help your company achieve its sales objectives and enhance its market presence.   Thank you for considering my application for the position. I look forward to the opportunity to discuss how my experience and vision align with the goals of your team. I am available for an interview at your earliest convenience.   Sincerely,   Ahmed Mukhtar

Engineer

Highly motivated and detail-oriented piping/pipeline engineer with 13 years of onshore/offshore experience  in all aspects of design and stress analysis in Oil & gas, power, petrochemical and water treatment sector  for greenfield/brownfield project. Extensive experience in fiberglass piping engineering. Possesses sound knowledge of piping/pipeline engineering, system design & analysis. Effective  communication, problem solving and interpersonal skills.

Engineer, Manager

Accomplished professional with 16+ years of experience in carrying out and in coordinating structural engineering activities on moderately complex engineering assignments for the purpose of quantity estimation for cost evaluation, detailed design and construction integrity for FPSO, FLNG, LNG, Petrochemical & Refinery plants.

Engineer, Manager

Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

I graduated from the IUCTT, Sri Damansara in 2011 with a Bachelor engineering in Electronic and Instrumentation Engineering and Master in Industrial Engineering from Universiti Malaysia Pahang. I started my carrier as a Technical Executive specializing in condition monitoring (vibration and thermography inspection) at AF Condition Monitoring Sdn Bhd (2009-2010) and as a Site Engineer at Tanjung CSI Sdn Bhd (Tanjung Offshore Group, 2011). Currently I'm working with EPCC company, Tanjung Offshore Services Sdn.Bhd (subsidiary of T7 Global Berhad) as a Senior Construction Project Engineer for multi disciplinary projects. My previous job combining with electrical, instrumentation, mechanical, machine maintenance, structure, piping fabrication and construction, inspection which specialize in project management & hook-up installation. I have seen the wonderful creations of your company and was startled by the precision, accuracy and elegance of your work. I aspire to learn to produce designs of such a high quality.

Engineer, Superintendent, Manager, Inspector

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

Highly accomplished and certified Project Management and Engineering Coordination professional with 20 years of extensive experience in the delivery of major Oil & Gas projects, including Newbuild, Retrofit, and conversions of FSRU, FLNG, LNGC and FSU. Proven expertise in developing and managing various natural gas and LNG projects across project life-cycle. Project management skills including developing Project Planning, Project Execution Plan, Contracting Strategy, Stakeholder Management, FEED & EPCIC Management. Skilled in coordinating across all functional interfaces, including Procurement, HSE, QA/QC, Class Society (Interface Close-outs), and construction teams. Seeking to leverage PMP-certified project control and specialist knowledge in Topsides/Hull Engineering to drive quality and on-time deliverables.

Manager

I am an experienced Piping Engineer with a proven track record in the mechanical and industrial engineering sectors. Skilled in AutoCAD, Petroleum, ASME Standards, Engineering, and EPC, I am a competent engineering professional holding a Bachelor's degree in Mechanical Engineering from Universitas Indonesia (UI).

Engineer

I have more than 10 years of experience in oil & gas projects for onshore and offshore. Most of my positions are as a project engineer where I assist project managers and coordinate all departments.

Superintendent, Manager

Seasoned Senior Instrumentation and Control Engineer with more than 11 years in the oil and gas as well as EPCIC sectors. Focused on field instrumentation, comprehensive engineering, SPI (INTOOLS), on-site commissioning, and vendor interaction. Demonstrated success in producing technical documentation, engineering outputs, and site assistance for both onshore and offshore projects. Acquainted with global standards such as ISA, IEC, API, ANSI, and ASME. Aiming for Sr Instrument/Instrument Engineer roles

Engineer

Hard Driven hands- on project, construction & commissioning personnel with more than 10 years of operation in oil and gas industry from downstream to upstream scope of work. Able to hold position in multiple layers in organization and independent in most working condition. A team player who listens and understand. Proven track record in major project worth up to RM200mln. At least 2 major EPCC and 2 major shutdown belts in hand.

Manager, Superintendent, Other, Inspector, Engineer, Supervisor / Technician

Seasoned Senior Process Engineer with 15+ years of experience in FEED and detailed engineering across hydrogenation, glycerine processing, and offshore produced water treatment within oil & gas and chemical industries. Expertise in process design, simulation, equipment sizing, and process safety (HAZOP), delivering reliable and fit-for-purpose engineering solutions. Proven experience in process optimization, brownfield modifications, and refinery operations, including RAPID project exposure. Contributed to technical and commercial proposal development for SBM Payara and Uaru Desander packages. Demonstrates strong multidisciplinary coordination and international project exposure through secondment to Technip Malaysia.

Engineer

I am a well-rounded Piping Engineer with over 17 years’ experience in design and construction of piping systems for industrial applications. Expertise in managing all phases of the project cycle, from initial plant data collection to designing, fabricating, constructing and installing oil, gas, and petrochemical process units. I have a proven track record of successfully delivering numerous projects (greenfield and brownfield) on time and within budget, whilst strictly adhering to safety protocols. I pride myself on having the drive and enthusiasm to ensure my work scopes are completed in accordance with the plan. I can work as an individual or as part of a team, loyal and passionate, striving to achieve continuous significant improvements within the workplace.

Engineer, Drafter / Designer

Civil & Structural Engineer providing design support, calculations, and drawings for industrial and infrastructure-related projects, including energy facilities. Experienced in reinforced concrete and steel structure design, equipment foundations, control buildings, and temporary works using STAAD.Pro, ETABS, Tekla Structures, and Excel. Works collaboratively with Professional Engineers (Ir.) to ensure designs are compliant, practical, and ready for review and endorsement where required. Available for structural analysis, detailing, drawing production, and engineering support roles.

Engineer