Automation freelance

More than 15 years experience of working years in Engineering Design in Oil and Gas Industry as an Instrument Engineer for both Brownfield and Greenfield projects. Involved in various engineering stage; Conceptual, FEED and basic engineering design, detail engineering design and EPCC work for Upstream and Downstream facilities. Familiar with the preparation of the instrumentation design drawings and documents, Instrument Loop Diagram, Instrument Location Plans, Instruments Installation and Hook-ups Details, Cable Block Diagrams, Instrument Schedules, Instrument Datasheets and Material Take-off. Experiences in onshore and offshore design of Instrument works and site visit for work scoping. Experience working with various multinational counterparts throughout projects as client PMT as well as consultant.

Engineer

I have more than 15 years of extensive experience in the oil & gas industry (offshore and onshore or combination of both offshore and onshore). My experience covered most stages of the project: Front End Engineering Design (FEED), Detailed Design Engineering (DDE), Construction, Hook-Up, Pre-Commissioning & Commissioning, even in some parts of conceptual design. My core discipline area is Instrument and Control System (plus Telecommunication System) and have been the key persons for major instrument packages such as Integrated Control and Safety System (ICSS), Distributed Control System (DCS), Fire Alarm Control Panel and Fire Suppression System, Custody Ultrasonic Gas Metering System, Pressure Reducing Station, Wellhead Control Panel, Analyzer System, Automatic Tank Gauging System, Control Valves, Shutdown Valves, Manual On/Off Valves, Motor Operated Valves, Pressure Safety Valves, Field Transmitter, Telecommunication System, etc. In addition, my experience also includes major involvement in the development of electrical packages (MCC / Switchgear, UPS, etc.), mechanical packages (Heater System, CO2 Snuffing Packages) and HVAC systems. My project experience covered greenfield and brownfield project of offshore wellhead platform, refinery and petrochemical complex, onshore receiving facility, offshore and onshore pipeline, offshore offloading platform, power plant, storage tank area and LPG Terminal. I have experience in becoming Lead Engineer on several occasions, i.e. Lead Instrument, Control and Telecom Engineer for JAWA 1 Project (JV or Pertamina, Marubeni and Sojitz), Lead Instrument & Control Engineer for Bukit Tua Infill Wells Project (Petronas) and as Lead Telecom Engineer for Su Tu Nau Wellhead Platforms FEED Project (CLJOC). I had coordination and interface experience as Project Coordinator during my tenure in TOSHIBA for DCS Migration at Tanjung Jati B Power Plant Unit 1 and JAWA 1 Project (as additional role), which improved my comprehensiveness in knowledge about project execution, coordination and interface.

Engineer, Manager

• 14 years’ experience as Instrumentation & Control Engineer and Project Engineer role in Offshore Oil & Gas, Chemical, LNG, Power industry, Engineering Design background, graduated from Beijing University of Chemical Technology which is a national key university for “Project 211” in China. • Involved project phases including: Tendering/Proposal, PSR, Concept, Pre-FEED/FEED, DED, Construction, Installation, Pre-Commissioning/Commissioning, Start-Up, etc. • Coordination for Project Engineering & Execution, Stewardship for Vendors and associated FAT/SAT, Facilitation for Procurement and site Construction & Commissioning, Support for Process Unit System Completion: TO, MC and HO, etc. • Steward contractor’s performance, engaging/aligning key stakeholders, engaging discipline engineers and other project resources as required, to complete the assigned scope consistent with the Project Objectives. • Support Procurement to prepare Material Requisition and assess vendor’s Proposal and Quotation, help to expedite vendor’s fabrication to meet project Critical Path requirement. • Engage Project Team and Contractors to verify that the design, procurement and construction is consistent with project requirements and completed within the established schedule. • Actively manage interfaces and ensure adequate engagement between all stakeholders (i.e. Construction, Commissioning, Engineering, Operations, Maintenance, 3rd Party Suppliers, etc.). • Coordinate procurement packages with Contractor and Company Technical Personnel to ensure technical requirements are met and equipment delivery dates support the Project schedule. • Ensure smooth transitions between project stages, across sites and between key stakeholders. Coordinate constructability inputs, project issues resolution, and change requests. • Familiar with Process Control System (PLC/DCS), Safety Instrumented System (SIS), Fire and Gas System (FGS), System Hardware Designing/Modeling, Proficient in Field Instrumentation, Analyzer, Control Valve, Mastered at IC&S Engineering Deliverables, e.g. Index, I/O List, Technical Data Sheet, Hook-up, Cable Routing, Cause & Effect, Logic Diagram, etc., Familiar with Field Engineering, Red Line Mark Up, Site Instruction Sheet (SIS), Quality Control Form (QCF), Advanced Check Sheet (ACS), Punch Closure, DCN Implementation, etc. • Skilled with Office & Graphic Software like: Microsoft Office & AutoCAD & Adobe Acrobat, Familiar with HMI Software like: InTouch, FactoryTalk, Familiar with 3D Model Review Software like: SmartPlant, Navisworks, Familiar with Engineering Design Software like: Autoplant, COMOS, AVEVA, SPIntools. • Familiar with Standards & Codes like: IEC, ASME, ANSI, API, ISA, PIP, etc. • Dedicated, Team-Oriented, Detail-Focused, with Strong Communication and Problem-Solving abilities.

Engineer

A seasoned, upstream oil and gas professional with a diverse set of experience in the fields of well construction, drilling engineering, drilling performance optimization and drilling project management.

Engineer, Manager

I am Mechanical Engineer with some many experience and abilties. Among them are machine maintenance, engine repair, calibration and 3D drawing. Al of that can be seen from my experience working and organization.

Engineer

With 20 years of experience in drafting and engineering design, I specialize in P&ID drafting, SolidWorks modeling, AutoCAD customization, and automation solutions to optimize engineering workflows. My experience spans across different industries including O&G, PetroChemical, Mining, food, industrial, and automotive manufacturing, where I’ve delivered high-precision designs, process diagrams, and automation tools to streamline operations. 🔹 What I Offer: ✔ P&ID Drafting & CAD Administration – Expertise in iDrawings, SmartPlant P&ID, AutoCAD, and AVEVA. ✔ SolidWorks 3D Modeling – Design of mechanical parts, assemblies, and industrial fixtures. ✔ AutoCAD & SolidWorks Automation – Custom scripts, LISP routines, and macros for efficiency. ✔ Excel & Database Integration – Automating reports, data processing, and engineering calculations. ✔ Project Management – 4+ years of leading projects, coordinating teams, and delivering quality results. I thrive on efficiency, accuracy, and automation, ensuring every project execution is optimized for quality on-time deliverable. Whether you need detailed P&IDs, 3D models, or custom automation solutions, I can deliver cost-effective, high-quality results tailored to your needs.

Drafter / Designer, Manager, Supervisor / Technician, Other

Committed and professional electrical, instrumentation and automation engineer familiar with standard electrical, instrumentation and automation requirements. More than twenty years experiences in proposal/tender, engineering design, procurement and project execution of electrical, instrumentation, automation control system and its construction for oil and gas, manufacturing and petrochemical industry. Strong management and leadership abilities for delegating tasks or providing instruction clearly and accurately. Prioritize, organize work and meet deadline. Strong communication skills, ability to work independently with best in team, self-motivated and ability to manage changing priorities.

Engineer, Manager

An Electrical Engineer with around 8 years of experience. Currently working as an Electrical Engineer in a consulting firm ( Gulf Engineering Consulting services) here in Pakistan. Involved in various commercial and residential projects.

Engineer, Drafter / Designer, Inspector, Manager

20 years of experience in Instrumentation & Controls and SURF. Specialized in Engineering Design including Concept Select, FEED and Detailed Design. Participate in all project development cycle including Assembly & Testing, Fabrication & Construction and Hook-Up & Commissioning for Topside, Floater and Subsea project.

Engineer

Instrumentation and Control graduate skilled in developing and enhancing automation technologies. Proficient in SmartPlant Instrumentation (SPI) for datasheet generation and experienced with Navisworks. Seeking an Instrumentation Engineer role to apply technical expertise in control systems, solve complex problems, and contribute to advancements in measurement and automation technologies.

Engineer

Graduated from MSc of Subsea Engineering at the University of Aberdeen, and BSc of Engineering Physics from Bandung Institute of Technology. I have a strong engineering background, mainly the principles of engineering mechanics & electrical which consists of numerical simulation method using computational fluid dynamics (CFD) in fluid mechanics projects and instrumentation & control in energy facilities projects. I have been adept at doing analysis related to subsea through hand calculations as well as software calculation. In which i was in charge in doing subsea pipeline analysis (on bottom analysis, free span analysis, stress analysis). I also have operated the simulation with Flexcom & StarCCM+ in regards to riser analysis while also adept at doing CFD analysis for subsea equipment such as erosion phenomena in pipeline gas bends. In cumulative, I have 9 years of working experience in oil & gas industry. At my last job, I was working as an instrument & electrical project construction engineer at Pertamina Exploration & Production Division, an Indonesian O&G company taking on construction projects of oil & gas surface facilities. All in all, I have a solid intention to have a career in energy or technology sectors, related to offshore, marine, or subsea industry.

Engineer, Superintendent

Currently working as Electrical & Instrument Engineer & Supervisor with OMNI Offshore and have 12 years of vast experience as Electrical & Instrument Technician in Offshore Production Platform, MOPU, FPSO, FSU and Drilling vessel. Have a very good knowledge in Testing & Commissioning and Operation & Maintenance. Confident, Good Communication Skill, Adaptability and Fast Learner, flexibility in approach. Good Knowledge and understanding of production operations activities. Well verse and understanding of Health & Safety systems & procedures. Good problem solving and trouble shooting skills, Good leadership skills and effective team player industry.

Engineer, Superintendent, Supervisor / Technician

Engineer with a proven ability to drive sales growth in the technical environment. Expertise in Electricity, Renewable Energy, SaaS, Maintenance, Pneumatics, IoT, Industry 4.0, and more. Several years of experience delivering value and cutting-edge solutions to customers. Experienced professional with a diverse skillset spanning Team and Strategy Development, MRO Services, Technical Sales, Key Account Management, Customer Relationship Management, Operations, Digital Transformation, Business Development, Marketing, IoT & Industry 4.0, Consultative Selling, Reliability Engineering, Predictive Maintenance, Asset Management, Project Management, and more. I am well-equipped to make a significant impact and contribute to the growth of your business.

years of experience in the design/Engineering of but not limited to; Measurement, Control System/ICSS and Functional Safety. Encompassing; Feasibility Study, FEED, Dual FEED Contest, EPC Bidding and EPC. Exposure to various process plant such as, Gas and LNG plant, LNG regasification, Olefin Cracking and Tank Terminal. Have worked as Owner and contractor side plus the experience of working with multi-national contractor such as JGC, Samsung, Toyo, Saipem and Wood. Understanding of other engineering studies and concepts such as Process Safety (HAZOP, SIL Assessment), Functional Safety and Alarm Management. Knowledgeable of Indonesia local regulation (MIGAS, DIMET), Relevant international standards (API, API MPMS, IEC, NFPA, ISA, ISO, NORSOK, OIML, ASME) and company's standard: JGC Standard (JPEP/JGS), Total GS.

As an Electrical engineer with ten of experience in electrical engineering, I excel in managing complex projects and leading technical teams. I oversee automation projects, negotiate with suppliers, and prepare technical and commercial bids. My previous roles at RMG, Cairomatic EG and Fine Peak Co. have equipped me with extensive expertise in tendering, RFQs, and project management for large-scale water and wastewater treatment plants. I hold a Master's in Business Administration and a Bachelor's in Electrical & Electronic Engineering Technology . I am passionate about innovation and efficiency, driving project success through strategic thinking and technical expertise.

Engineer

**Senior Electrical Field Lead Engineer | Chief ETO (M.Sc.)**  *18+ Years in Hull Conversions, New-Builds & Shipyard Leadership*  I am a hands-on electrical field engineer specializing in **complex marine projects**, from hull conversions to DP3 vessel commissioning. With **direct CMHI Shipyard (Nantong) experience**, I bridge the gap between EPC contractors, construction teams, and design offices—resolving critical Technical Queries (TQs) and ensuring seamless HV (up to 10 kV), DP, and hybrid ESS integration.  **Key Strengths:**  - **On-Site Leadership**: Autonomous decision-making for electrical systems in shipyard environments.  - **CMHI Expertise**: Recent success in commissioning and inspections at Nantong yard.  - **Global Readiness**: Based in Shanghai/Nantong with valid Chinese visa; mobilizable after brief EU familiarization.  - **Technical Breadth**: HV installations, Kongsberg DP systems, Orca ESS, and FAT/SAT oversight.  I deliver **field-to-commissioning excellence**, combining rigorous standards with cross-cultural collaboration. Let’s connect to discuss how I can mitigate risks and accelerate your project’s electrical scope. 

1. Qatar Gas 2. Aramco 3. NPCC 4. MCDERMOTT

Supervisor / Technician, Engineer

14 years of diverse Instrumentation & Control experience in FEED, Design & Detail Engineering, Proposal management, Construction, Commissioning, Project coordination, and Procurement in the following fields – • Oil and Gas - Offshore (FPSO, FLNG, Fixed Platform), Onshore (Naphtha Cracker, CH4, Benzene Units) • Power Plant – Steam Turbine, Gas Turbine • Food & Chemical Plants – Sugar Plant, Ethanol, Alcohol, Distillery, Water Treatment Plants • Mining, Metal and Fertilizers – Coal Processing Plant, Metal Processing Plant, Sinter Plant, DAP and NPK Plants

Engineer

More than 15 years experience for control system, for engineering until plant startup

Engineer

I am an Instrument & Control Engineer with 4 years total experience. I have experience at proposal phase from start-up / operation and maintenance phase. I am able to build, design and calculate equipment that relate to instrumentation and control such as gauge and transmitter, control valve and on-off valve, PLC and DCS include in build flowchart process to execution phase. I can work with thigh schedule and high pressure condition. If possible with my schedule,I can witness and doing FAT and Commissioning, Please do not hesitate to contact me for more information

Engineer

More than 7 years experiences in Intrument and Control Operational and maintenance of the power plant and National Gas Company Experienced in Pre commissioning and commissioning of the Power plant project Capable and understand with Operational, trouble shooting and maintenance activities,Open minded, flexible personality & positive attitude. Highly motivated & good oriented. With a Degree of Diploma of Science in Computer Engineering.

Engineer

Project Manager, Contract Administrator and Civil Engineer with 18 years of experience combining strategic vision, technical excellence and collaborative leadership to drive high-impact projects in the Oil & Gas, infrastructure and energy sectors. Management and Direction of CAPEX Major Projects Investment Projects. Strong leadership skills, strategic decision-making and negotiation with stakeholders. Committed to continuous improvement, operational efficiency and the delivery of results aligned with strategic objectives. Extensive experience directing and leading high-performance multidisciplinary teams, coordinating contractors, overseeing regulatory compliance, safety and contractual deadlines.  Certified Professional Project Manager (PMP) with solid skills in Project Lifecycle Management: Scope, Time and Cost Management. Design Management. Risk management. Budget management. Management and administration of FIDIC/NEC contracts; EP, EPC, EPCM (Lump sum, Unit prices, Time & materials). Management and handling of Claims. Schedule management. Purchasing & supplier management. Construction management. Quality Management and EHS. Start-up, Handover & Turnover.  Professional with experience in the implementation of Project Management Officer - PMO combining best practices, agile methodology and standards for the management of Investment and Infrastructure Projects: FEL, AACE, AWP, PMI, Lean Project Management and VIPs (Value Improving Practices). My focus during Project Management and Management is to meet the strategic objectives of the organization, generating value and profitability expected by the Operator and the Board of Directors, achieving the satisfaction of the interested parties within the established Budget and deadline.

Superintendent, Manager, Inspector, Engineer, Supervisor / Technician

More than 20 years of work experience in upstream and downstream, oil and gas industry specifically as an exploration & production (E&P) offshore facility engineer, refinery process engineering specialist, crude oil trader, and petroleum fuels retailer. Possess deep industry knowledge and competency in business development, customer relationship management (CRM), sales, marketing & trading, enterprise resource planning (ERP), supply-chain procurement & management, logistics, and, project engineering & management.

Manager, Engineer, Drafter / Designer

I am power plant and performance engineer with experience more than 20 years and as per attached CV

Engineer