I have over 2 years of experience as a Process Engineer, with a strong focus on upstream oil & gas and FPSO applications. My core expertise lies in designing and specifying filters and coalescers, ensuring full compliance with API 12J, PTS 165209, and Shell DEP standards. I’ve performed 70+ detailed process design calculations and collaborated across regions—particularly with teams in Indonesia and Australia—on 20+ bid projects. My experience also includes developing P&IDs for skid packages, preparing MTOs and instrument datasheets and reviewing vessel GA drawings for process compliance. I’ve conducted thermal calculations for fired heaters and supported water bath heater operations. I also involve in Maria Quitéria FPSO Fire Water System project, I performed hydraulic analysis for firewater, foam, and deluge systems using PIPENET, optimizing flow and pressure losses for over 300 nozzles. I prepared 7 hydraulic study reports. Additionally, I contributed to the ISND Phase 5.2 Water Injection Transient Surge Study, where developed dynamic PIPENET models for 8 transient scenarios. This work improved system reliability, eliminated risks such as water hammer and vapor cavitation, also delivered accurate, in-depth technical reports with surge analysis and risk mitigation strategies.

Engineer

I work as Chief Rig Mechanic With 15 years of experience working in all stages of oil and gas field evaluation and development, their goal is to search for hydrocarbons in the most effective way and solve any operational problems. I can also be responsible for using drilling tools and techniques and getting the most out of old or poorly performing wells during the entire extraction process. It also reduces the impact of drilling on the environment and ensures compliance with environmental protection laws

Experienced Control System Engineer with years of experience in Engineering phase, Testing phase (TAT, FAT, I-FAT, SAT), Commissioning and Start-Up phase, and systems training (Operation, Maintenance, and Engineering). Familiar with Honeywell System, Yokogawa, Hima, Wonderware inTouch, and Cisco switching and routing. Experienced in design, configuration, and testing, and adept in carefully diagnosing and assessing issues. Committed to working as a collaborative and positive team member, striving to utilize my knowledge and expertise for optimal engineering results.

Engineer

I am writing to express my interest as Project Engineer. With over 12 years of experience in oil and gas projects, including 10 years in structural engineering and 2+ years in project planning and management, I am confident in my ability to contribute effectively to your team. As a Project Engineering & Management with expertise in civil and structural engineering, I have been involved in various large-scale projects, including bridge construction, infrastructure improvements, hydrology and flood mitigation, and refinery developments. My key skills include : My key skills include: * Project Planning & Management – Value engineering, multi-criteria decision analysis, risk analysis, and project economics. * Structural Engineering – Analysis and design of steel and concrete structures, including foundation equipment, heat exchangers, tanks, and industrial buildings. * Project Execution & Contracting – Developing project scopes, managing FEED and DED phases, procurement coordination, and ensuring compliance with project timelines and budgets. * Stakeholder Collaboration – Coordinating with multidisciplinary teams, consultants, and contractors to ensure project success.

Engineer

• Highly engaged professional with over 20 years experiences in Technology innovation, Process Specialist, Process Technologist, Strategic Business Development,Project Management and Team Leadership in offshore & onshore industries. • Subject matter expert in Process engineering in oil and gas assets and process optimization. • Experience includes execution of work related to Conceptual study, Basic and Detail design & EPCC projects and prepares technically correct, safe, environmentally friendly, cost and time effective discipline engineering analysis and solutions for approval. • Professional expert level trainer in Process engineering, technology & Project management training conducted numerous training in various countries and also to be an Adjunct Lecturer at universities. • Pioneered as technical consulting and technology development & deployment teams for maximizing asset performance, Process improvement & optimization and green energies • Strong personal; and career history, comfortable stepping into conceptualizing, validating and realizing ideas. • Passionate public speaker in workshops, conferences and forums. Comfortable to present ideas to executives.

Engineer

Instrument & Control Engineer with 11 years of experience consist of Manufacturing and Oil & Gas Industry. Involve in various stages and project for Detail Design, Engineering (FEED),Installation, Hook up / Construction, Testing and Commissioning of DCS, plant maintenance for electrical and instrument, construction of interconnecting facility for telecommunication (fiber, system & telco cabinet, and gas detector), Instrumented Protective Function classification, verification & report and Fire & Gas Mapping, Control Systems, Safety Instrumented System Fire & Gas System, Field Instruments and various measurement equipment (custody transfer, metering, fire alarm system, fire and gas system, QMI analyzer, TGS etc) in Oil & Gas industry. Also Involve in production of TV and HDD Testing with a various software tools and debugging in Manufacturing Industry.

Engineer

I am able to handle multiple tasks on a daily basis. I am a dependable person who is great at time management. I am always energetic and eager to learn new skills. I have experience working as part of a team and individually. I am flexible in my working hours, being able to work evenings and weekends.

16 years of experience as a Senior Drafter especially in Process and Process Safety for energy, oil and gas project. Energic person, Organized, Careful, Target achievement, Detail oriented. Enthusiasm, Hardworking, High quality priorities and dedicated to producting and supervising a high quality of process dan process safety in project. Thriving within a hight pressure, deadline driven enviroment. I love the challenge that brings me to make a new innovation in a high demand to solve the problem.

I am a seasoned HSE professional with 16 years 10 months of experience in the oil and gas industry, encompassing Offshore, onshore upstream oil and gas production facilities and downstream oil and gas sector. 

Supervisor / Technician, Manager, Engineer

As a Senior Geophysicist with over 12 years of experience in the oil and gas industry, I specialize in seismic interpretation, with focus on reservoir characterization. My expertise covers the entire seismic workflow, from acquisition to processing and interpretation, ensuring that the subsurface is thoroughly understood to guide exploration and development decisions. I have worked extensively with both 2D and 3D seismic data, integrating it with well logs and other geophysical datasets to identify and characterize hydrocarbon reservoirs using advanced geophysical software tools for seismic data analysis, such as Petrel, DecisionSpace, or OpendTect, enabling accurate subsurface mapping and risk assessment. My experience in reservoir characterization allows me to provide detailed insights into the distribution and properties of reservoirs, which is critical for assessing their potential productivity. I am also skilled in seismic acquisition and processing, ensuring that the data quality meets the highest standards for interpretation. My knowledge of AVO and quantitative interpretation (QI) has been instrumental in de-risking prospects by assessing fluid and lithology changes, helping to differentiate between hydrocarbon-bearing and water-bearing zones. Throughout my career, I have collaborated with multidisciplinary teams, including geologists, reservoir engineers, and drilling teams, to optimize exploration strategies and enhance field development. My ability to deliver accurate subsurface models and communicate findings effectively to stakeholders has been key in supporting data-driven decision-making in complex geological environments. I am dedicated to staying at the forefront of geophysical technologies to ensure high-impact, innovative contributions to the projects I work on.

Detail-oriented and proactive process engineer with 3 years of experience in process engineering design. Involved in various stages of project execution, which includes Feasibility / Conceptual Design, Front End Engineering Design (FEED) and Detailed Design Engineering (DDE). Familiar in most Oil & Gas industrial code and standards, e.g. API Recommended Practices and Standards, PETRONAS Technical Standards (PTS) and GPSA. Currently working at SBM Offshore and assisting Lead and Senior Engineers in various process design engineering activities. The detailed design engineering experience includes but are not limited to the following type of work: 1. Development of process simulation models (steady state / dynamic) 2. Preparation of Heat and Material Balance (HMB) which includes use of steady state process simulation software such as Aspen HYSYS 3. Preparation of technical process drawings, e.g. PFD, PSFD, P&ID, CEM, SAFE Chart 4. Preparation of process equipment sizing (e.g. 2-phase separators, gas scrubbers, etc) and major process line sizing calculations 5. Preparation of relief, blowdown and vent / flare studies, which include low temperature and hydrate studies 6. Development of flare network models for offshore facilities 7. Development of steady state pipeline hydraulic models (single branch / network)

Engineer

I am an engineer registered under the Board of Engineer Malaysia (BEM) and a Professional Technologist under the Malaysia Board of Technologists (MBOT) with a degree Bachelor’s Degree in Electrical (Electronic) Engineering (Hons.) from Universiti Malaysia Pahang. I have experience as Electrical Engineer at engineering consultant company more than nine (9) years. My job scope covers the following: • Prepare electrical engineering proposal, feasibility study, basic engineering design, and detailed engineering design. • Participate in project meetings, interdisciplinary checking, design review session, constructability review, HAZOP, HAZID, ELSOR, and FAT. • Prepare and review engineering calculation cable sizing, load study, and lux calculation.  • Provide engineering support during construction.  • Prepare and review engineering drawings, i.e. Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection Drawings, Equipment Layouts, Cable Routing and Layout Drawings, Cable Trench/Tray Layout Drawings, Lighting System Layout and Details, Earthing/Lightning System Layout and Details, Installation Standard Drawings. I also have working experience as maintenance executive electrical. My job scope covers the following: • Responsible for plant electrical facilities maintenance (High Voltage and Low Voltage System, Transformer, Emergency Diesel Generator, VSD, Motor, Lighting, MSB, Panel) • Develop and review maintenance contracts to ensure adequate maintenance is performed. • Responsible to manage and guide contractor/vendor in fulfilling of all electrical system work activities. • Interface with Engineering, Operation, EHS for equipment, preventative/correction maintenance program and projects and compliance with various regulatory procedures. I have good functional knowledge of electrical codes and standards: IEC, NFPA 497, BS, Standard, IOGP and PETRONAS Technical Standard

Engineer

I graduated from Chemical Engineering Department of Yıldız Technical University in June 2018 and from Mechanical Engineering Department in January 2019 as double major. I am continuing Master of Chemical Engineering education at Boğaziçi University. I know how to use AutoCAD, Solidworks, Catia, MathCAD, Chemcad, Aspen Plus and HYSYS, Pro/II, Unisim, MATLAB and Simulink programs. I can also draw technical drawings by hand. I have experience in industrial projects. I took roles in such projects. Some of those; Soot Blowing Optimization, Prevention of Accumulation in Air Heaters, Calculation of Boiler Efficiencies, Researching of Fly Ash Resistivity and Improving of ESP Performance, FGD Process Analysis and Adaption of New Technologies to New Steam Boiler Project. In addition, during my education, I did “Biocomposite Usage in Automotive Industry”, “Vibration Analysis for 3 Different Type Drivers on Biodynamic Half Car Model” and “Solar Paneled Airborne Wind Turbine Design” projects. I have a lot of experience at Wood and Tekfen Engineering companies.

A dedicated Process Engineer with over 5 years of experience in process engineering design and project execution across downstream Oil & Gas and NG/LNG reticulation system. Strong background in chemical thermodynamics, separation principles and cryogenic technologies. Proficient in steady-state simulation via ASPEN Hysys, heat and material balance calculation, line sizing, hydraulic calculation, equipment specification and instrument sizing. Passionate and committed to delivering high-quality, innovative engineering solutions while continually developing technical expertise.

Engineer

Dedicated and motivated geoscientist with 13 years of experience. Can adapt in every situation that might occur and willing to learn as much knowledge that I could, seeking to fill up the position available.

Other

A graduate in Bachelor of Petroleum Engineering Technology (Operation and Safety) program at University Kuala Lumpur Malaysian Institute of Industrial Technology (UniKL MITEC), Johor. Equipped with theoretical knowledge and practical experience on operation and safety aspects specifically for Oil and Gas industry. Backed by successful 6-months internship experience at Luvata Pasir Gudang Malaysia, Petron Malaysia Refining & Marketing Berhad, professional certificates and additional training. Eager to obtain job placement that will enable me to use my educational background and ability to work with your organization.

Experienced and accomplished Exploration Geophysicist with 15+ years in conventional and unconventional resource exploration. Demonstrated expertise in seismic interpretation, structural and stratigraphic mapping, and integrating geophysical data with well data to identify prospective opportunities. Skilled in designing and interpreting seismic data to produce reliable maps and attributes that drive exploration success. Collaborative leader in multidisciplinary teams, ensuring geophysical insights guide exploration, resource assessment, and operational decisions effectively.

Dear Hiring Manager, I am writing to express my strong interest in the Remote Flow Assurance Engineer position recently advertised by Trees Engineering. With over 12 years of hands-on experience in thermal hydraulic modelling, hydrate suppression strategies, and subsea pipeline optimization—and a strong foundation in using OLGA, PipeSim, and HYSYS—I am excited by the opportunity to contribute to your global team from a remote setting. During my tenure with leading firms such as Wood Group Kenny, KBR, and SNC Lavalin, I have led major flow assurance scopes including the Shah Deniz 2 project, Kashagan field, and gas condensate systems across FEED and execution phases. My expertise extends across steady-state and transient analysis, hydrate management, erosion/corrosion mitigation, and start-up/cool-down simulations using OLGA and PVTSim. I’ve also coordinated technical deliverables, vendor interfaces, and risk evaluations for complex offshore systems—skills that align well with the expectations at Trees Engineering. Having recently led programme management initiatives in the digital and regulatory sectors, I bring additional strengths in stakeholder communication, scheduling, and virtual collaboration—essential traits for a successful remote contributor. I would be delighted to bring my hybrid skill set to Trees Engineering and support your global flow assurance projects. I look forward to the opportunity to further discuss how I can contribute value to your team. Warm regards,

I am a qualified Marine Engineer with over 7 years of experience in offshore construction, vessel maintenance, and mechanical systems. I have contributed to major projects such as Arctic LNG2 and the North Caspian pipeline, where I supervised dredging operations, seabed preparation, and vessel commissioning. My expertise includes troubleshooting diesel engines, overseeing technical documentation, and coordinating with Class Surveyors and subcontractors to ensure compliance with engineering and HSE standards. Currently, I am pursuing a Master’s degree in Advanced Mechanical Engineering at the University of Aberdeen.

I am a “Well Engineering Specialist” with 19+ years of hands-on experience in “Front-end Well Engineering”, “Drilling Operations”, “Well Abandonment for Field Decommissioning” and “Project Management” for oil & gas wells across India, SE Asia, Australia, Middle East, Japan, Africa, Sri Lanka and Turkmenistan. I have extensive experience in complex well designs, planning and execution of Onshore and Offshore (both shallow-water and deepwater) well projects covering HPHT, Highly deviated/Horizontal/3D, Extended Reach (ERD) & Geothermal wells with exploration, appraisal and development objectives. I have successfully delivered wells with unique drilling challenges such as narrow-margin drilling, sour gas, salt drilling, 3-D directional wells with small anti-collision margins in a dense cluster field, shallow laminated reservoirs requiring horizontal wells, depleted reservoirs, loss-prone carbonates requiring PMCD technology, depleted reservoirs requiring MPD + wellbore strengthening, tight volcanics & unconventional reservoirs requiring hydraulic fracturing, Coil Tubing drilling with MPD, geothermal, etc. I have excellent oral & written communication and problem-solving skills and a proven ability to innovate, multi-task, collaborate and deliver optimal results with a positive work ethic, energy and desire to continually build on success. I have developed good interpersonal skills and international working standards by working with renowned Oil & Gas operators such as Shell Malaysia, Reliance Industries (India), Petronas Carigali Sdn Bhd (Malaysia), Cairn Oil & Gas (India), Santos (Australia), and Apache Energy (Australia). I have been consistently recognized and commended for in-depth analysis, team collaboration and timely delivery of projects without compromising on HSE and quality.

I have gone through experiences together with Project Management Team, QC Inspection Team and Production Team for 26 years in Oil and Gas Construction and Fabrication which, specialize in structural, piping, mechanical and architecture discipline. HIGHLIGHTS  Acquired 26 years' experience inclusive ofhands-on welding supervisory as well as manage various aspects of QA/QC inspections and verifications in the structural and Oil / Gas industrial fabrication / construction and hook-up commissioning.  Six (6) years of experience in the field of QA/QC Inspection and sixteen (18) years of experience in the field of Construction (Production).  Two (2) years of experience in the field of Hook-up and commissioning.

Superintendent, Supervisor / Technician, Other

I am a hard working, honest and can work as a team

Inspector

I am an Instrumentation and Control Engineer with over 14 years of comprehensive experience in both project execution and maintenance within industrial automation and process control environments. My background includes the design, installation, commissioning, and maintenance of instrumentation and control systems across oil & gas, petrochemical, and power generation sectors. I have a strong command of DCS, PLCs, SCADA systems, and field instrumentation, coupled with a deep understanding of control philosophies, safety systems (SIS), and international standards (IEC, ISA, etc.). Throughout my career, I have successfully led and supported multidisciplinary projects from concept to commissioning, while ensuring long-term reliability and compliance during the operational phase. I am skilled in troubleshooting, root cause analysis, and optimizing system performance. My proactive approach, attention to detail, and commitment to safety and continuous improvement have contributed to consistent operational excellence and project success.

Manager, Engineer

Project Manager, Contract Administrator and Civil Engineer with 18 years of experience combining strategic vision, technical excellence and collaborative leadership to drive high-impact projects in the Oil & Gas, infrastructure and energy sectors. Management and Direction of CAPEX Major Projects Investment Projects. Strong leadership skills, strategic decision-making and negotiation with stakeholders. Committed to continuous improvement, operational efficiency and the delivery of results aligned with strategic objectives. Extensive experience directing and leading high-performance multidisciplinary teams, coordinating contractors, overseeing regulatory compliance, safety and contractual deadlines.  Certified Professional Project Manager (PMP) with solid skills in Project Lifecycle Management: Scope, Time and Cost Management. Design Management. Risk management. Budget management. Management and administration of FIDIC/NEC contracts; EP, EPC, EPCM (Lump sum, Unit prices, Time & materials). Management and handling of Claims. Schedule management. Purchasing & supplier management. Construction management. Quality Management and EHS. Start-up, Handover & Turnover.  Professional with experience in the implementation of Project Management Officer - PMO combining best practices, agile methodology and standards for the management of Investment and Infrastructure Projects: FEL, AACE, AWP, PMI, Lean Project Management and VIPs (Value Improving Practices). My focus during Project Management and Management is to meet the strategic objectives of the organization, generating value and profitability expected by the Operator and the Board of Directors, achieving the satisfaction of the interested parties within the established Budget and deadline.

Superintendent, Manager, Inspector, Engineer, Supervisor / Technician

Having more than 10 years experience in various projects of petrochemical, oil and gas. Additionally, he is very familiar with various projects and multi-national clients' requirements such as Petronas, Medco E&P Indonesia,Kondur Petroleum SA ( Energi Mega Persada), Pertamina, Pupuk Iskandar Muda and PLN, Pupuk Kujang Cikampek (Indonesian Ammonia/Urea Fertilizer Producer), Peruri and Feni Haltim (Antam). Graduated from School for Engineering of PLN ( STT-PLN ) majority in Electrical Engineering and continue starting the first job as Electrical Engineer in 2008.

Engineer