Commissioning freelance

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

I am a passionate instrument engineer with ten strong years of experiences specializing in Instrumentation & Controls, Fire & Gas and Telecommunication systems spans from oil & gas to construction industries. I offer a unique combination of technical expertise, strong interpersonal skills, and unwavering commitment to excellence. I am confident in my ability to contribute effectively to any project in the instrument engineering field

Engineer

Well versed in project delivery from design up to commissioning, electrical engineering to multi-discipline liaising for proper integration. Package engineer for gas/diesel engine generators, transformer, UPS, DCS and Solar Power System. Coordinating construction work sequence, work schedule to the subcontractor. Adaptable to operate new software.

Engineer

Graduate in Bachelor of Mechanical Engineering from Andalas University with an interest in metallurgy and material. A fast learner person, highly motivated and great passion in EPCI Industry. I have prior experience of 4 years as a piping engineer at Mcdermott Indonesia with a demonstrated history of working as detail engineer, pre-commissioning (piping completion & reinstatement), piping erection workpack by ASSET 55 and as FAT (Factory Acceptance Test) Engineer for subsea pipeline project. Skilled with AutoCAD, Naviswork, piping process, pipeline, Subsea Testing Method, Pipe Stress Analysis.

Engineer

I am an experienced Electrical Instrument Inspector with over 9 years of experience in the electrical field. Proficient in inspecting, testing, and maintaining a wide range of electrical instruments and equipment. Strong knowledge of electrical codes and regulations, as well as excellent problem-solving and communication skills. Committed to safety and quality workmanship I have had the opportunity to work on a variety of oil and gas projects. I have worked on multi-national teams and have experience communicating with contractors, engineers, and other professionals from different cultural backgrounds. I am well-versed in using inspection and testing equipment, and I am comfortable working in both indoor and outdoor environments. I am an excellent problem solver and am able to think critically and make sound decisions. I am a highly organized and detail-oriented professional. I am dedicated to ensuring the safety and compliance of all electrical systems and am always willing to go the extra mile to ensure the satisfaction of my clients. In summary, I am an experienced electrical Instrument inspector with a strong background in codes and regulations, extensive knowledge of electrical systems and components, and experience working on multi-national teams. I am dedicated to ensuring the safety and compliance of all electrical systems and am committed to providing excellent service to my clients.

Inspector, Supervisor / Technician

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides

Engineer, Manager, Inspector

I specialize in instrumentation and control, with over 19 years of experience in both fabrication yards and upstream offshore oil and gas industry. I have worked on major projects for greenfield and brownfield developments. My background includes navigating the EPCIC work environment, managing various stakeholders, and ensuring compliance with international codes and safety standards. I'm proficient across turnkey project phases, from engineering to commissioning, and project close-out. Additionally, I have hands-on experience with field instrumentation and control system packages. My familiarity extends to project execution for CPP, WHP, FSO, FPSO, compressor modules, and LQ facilities including for SIMOPS and SIPROD. Having served in international work environments and collaborated with global project teams, I have also taken on the role of offshore team lead for various projects, including fast-track project implementations.

Engineer

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

I am a Bachelor of Science in Instrumentation and Control Engineering graduate from Batangas State University, Philippines batch March 2004. My 16+ years experience in the Power Generation (Renewable-Binary Geothermal), O&G, Sulphur Granulation / Storage / Shiploading, Petrochemical, Water Desalination, and Construction/Commissioning/Maintenance Industry has provided me with the opportunity to enhance my overall knowledge of a variety of facets and the workflows in Engineering, Construction, Completions/Commissioning, Maintenance, and Operations. Being a versatile Instrument Engineer is the key to any successful and safely executed project and working in challenging environments has provided me a unique understanding of the requirements necessary to deliver great results in a safe productive manner. 

Engineer, Inspector, Supervisor / Technician

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.

Engineer

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Highly motivated and results-driven HSE professional seeking a challenging role in the oil and gas industry. Offering expertise in process safety support, HSE supervision, PTW coordination, and project management. Dedicated to maintaining HSE standards, ensuring compliance, and promoting a culture of safety. Committed to driving operational excellence and fostering a safe working environment.

Electrical engineer with more than 12+ years of experience at Oil & Gas sector. Familiar with PTS, IEC, EX requirement on electrical package. Experience with Detail Design Engineering, Electrical inspection, Construction, Pre-commissioning & Commissioning. Has involve in EPCC, PCC, Brownfield, and Greenfield & Hook-up Commissioning.

Engineer

More than 23 years of experience with several multinational companies. Experience in project management, construction and engineering in Oil & Gas industry, green energy. Hands on engineering design experience for electrical/control system, industrial robot programming and mechanical design in industrial automation particularly in manufacturing and automotive industry.

Engineer, Manager, Superintendent

I have experience in offshore and onshore job for more than 9 years in Process Control System, Shutdown, Fire and Gas System engineering from design to software development. Total of 12 years including my earlier career in manufacturing. I have found my true passion and seeking for onsite working environment for new challenges and to improve my knowledge in instrumentation. I look forward to hands on jobs and believe knowledge and hands on experience are needed to truly understand and improve any system.

Engineer

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

Senior Instrument and Control System Engineer with 20 years of experience in project execution, design validation, and commissioning of instrumentation systems across petrochemical, power generation plants, and oil & gas sectors. Proven ability to coordinate multidisciplinary engineering activities, prepare technical documentation, and support construction teams during installation and commissioning phases. Extensive experience in validating vendor-supplied control valves, process sensors, and safety elements in compliance with international standards

Engineer, Supervisor / Technician, Superintendent, Inspector

* Total experience in the Oil and Gas Industry is more than 24 years, with details of 6 years in the field of oil refinery operations, and 18 years in the field of processing facility design (consisting of 15 years onshore and 3 years offshore) both in Indonesia and abroad (Sultanate of Oman and Brunei Darussalam) * Extensive experience in Concepts, FEED (Front End Engineering Design), DD (Detailed Design) for onshore/offshore processing facilities, refinery operations (Crude Oil Distillation Unit, Naphtha Hydro Treating Unit and Catalytic Reforming Unit) and also start-up & commissioning. * Experience in process studies (flow assurance study, dispersion study, etc.) and proficient in several process simulation software (HYSYS/UniSim, Shell FRED, FLARESIM, PIPESIM and OLGA).

Engineer

Process engineer with more than 6 years of experiences in various petrochemical projects at all phases starting from Feasibility Study until handover at Project Completion. Adept in process technical and commercial evaluation, value engineering, and interfacing work with multiple stakeholders. Consistently perform excellent communication skills and capability to thrive under pressure.

Engineer

Offering 25 years in the field of Project Management in Oil/ Gas Construction Management , Terminals , Storage Tanks , Offshore / Onshore Facilities,  Plants , Refineries , Pipelines ,. Fluent in English & French Well trained in USA, Germany , France & Italy  Certified from ASME,ASNT,PMI,AEE Previous Experience in GCC area: Kuwait, UAE, Qatar , KSA & Oman Regards                    

Engineer, Superintendent

* About 10 years of experience with the instrumentation and control mainly in EPCC projects for combine cycle power plant, Water treatment plant, Co-Gen, HRSG, HVAC, Fire and Gas and other oil and gas projects. * Assist construction team, planning and supervise precomm & commissioning activity during project execution for greenfield and brownfield projects. Monitor and make sure all jobs as per engineering design and client requirement. * Generate/review JMS/JHA for testing and commissioning. * Generate/review ITR or inspection checklist. * Role as a Pre-Commissioning & Commissioning Engineer until handover. Plan, monitor and supervise function test, modbus mapping, loop check activity, recalibration activity and etc . Involved in Mechanical Run Test, Solo Run Test, Performance Test. * Turnover pack or Test Pack preparation and compilation for final document submission. * Join review control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart, schematic diagrams, inspection procedure technical datasheet. * Participate in engineering design review such HAZID, HAZOP, 3D Model. * Designing, implementing and commissioning of new control loop as per site requirements such as IO list, loop drawing, termination drawing, instrument layout Involves in FAT and SAT during Commissioning. ● Produce BQ, MR & TBE for vendor & subcon packages. ● Produce change order for related to instrument and control to client. ● Provide classroom and on site training for system related to the client such air compressor, air dryer, PLC system and etc

Engineer

I have over 20 years of experience Occupational Health, Safety and Environment in Offshore & Onshore Rig environment, including more than 11 year's in  occupational health and safety, I bring a wealth of expertise in risk management, incident investigation, and compliance with HSE standards. I have actively contributed to improving workplace safety by conducting regular hazard assessments and implementing effective control measures. My efforts have consistently ensured compliance with industry standards and reduced incident rates. I would be honored to bring my skills and commitment to your team. Valid courses: OGUK, BOSIET, HUET, Seaman Book, OPITO H2S, IOSH.MS, NEBOSH, NVQ-Level 6.

Engineer

19 years’ diverse range of relevant experience in the oil and gas Brownfield/Greenfield. Contribute a dynamic, result - oriented and offering focus leadership in delivering safety and project as Offshore Construction Site Representative within time frame and budget given. Consistently achieve performance goal through enthusiasm, tenacity and initiative, which complement knowledge / expertise in upstream and downstream.

Superintendent, Other, Manager