Fabrication freelance

Bachelor's degree in Mechatronics Engineering with 14 years of extensive experience in project management across various organizational levels and portfolios. Expertise includes sub-contractor management, client interactions, and adaptability to diverse working environments. Proficient in navigating management setups, contract execution strategies, and project-specific requirements. Well-versed in government and local regulations, client-specific standards, and international best practices (DEP, ASME, API), as well as design and operational codes/standards. Demonstrated ability to effectively oversee and managing project budgets and funds, with a strong foundation in contract management and procurement.

Manager

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

Dear Hiring Team I am looking for weekend inspection job I got double certificate on CSWIP 3.1 and AWS CWI Experienced in creating WPS , WQT and PQR Good communication skills and attitude.

Other, Inspector, Engineer

I am a passionate instrument engineer with ten strong years of experiences specializing in Instrumentation & Controls, Fire & Gas and Telecommunication systems spans from oil & gas to construction industries. I offer a unique combination of technical expertise, strong interpersonal skills, and unwavering commitment to excellence. I am confident in my ability to contribute effectively to any project in the instrument engineering field

Engineer

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

I have more than 14 years career experiences in various major Oil & Gas EPCIC/EPC project. Currently, I serve for Dialog Energy Sdn. Bhd. as role of Senior Project Engineer (Mechanical & Piping). I am member of Board of Engineers Malaysia (with Reg. No: G179141A) since year of 2012. My main strengths and functions are mainly in mechanical engineering package and fabrication engineering with some project management capabilities. I am very cooperative person either individually or in a team, I assure you that willing to work in minimum supervision to complete the work or task given to me with considering the quality of work with safety and quality manners. You will find me as a well- organized individuality with excellent analytical and problem-solving skills. I thrive on new challenges, and my innovative approach to systems and improvement, along with my desire to learn, will prove to be a greatest asset to the industries.

Engineer

The most potential in Quality Health Safety and Environment position starting with Field Executor until Management which have direct roles to the operation of Oil & Gas companies either International or National scale such as: PTTEP-MOGE Myanmar, Pertamina Refinery Unit V, Pertamina Hulu Kalimantan Timur (PHKT), Arabian Gulf Oil Company (AGOCO), British Petroleum, Total EP Indonesia, ExxonMobil, Chevron Indonesia Company, Virginia Indonesia Oil Company (VICO), PTTEP Thailand, Pertamina EP and Medco Energy as well as Weatherford and Scomi Oiltools as Service Company that have enriched acknowledgement of QHSE ethics, codes and standards from their daily basis through various levels (Officer, Supervisor, until Manager). For over 20 years overall period of working experiences that initiated from non-technical works, by will and opportunity, made me become involved in this technical function on Oil & Gas Operation and Exploration either Constructions or Development Projects.

Supervisor / Technician, Superintendent

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.

Engineer

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.

Engineer

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

Working at various onshore and offshore projects including maintenances work, routine inspection during shut-down and fabrication stage for more than 15 years as QA/QC Engineer and Welding Inspector. Work nature included visual inspection, witnessed testings, witness/co-ordinate NDT activities, and prepares/review all required documentation. Familiar with QA/QC document system, traceability record and familiar with standard and specification related

Engineer, Inspector, Manager, Supervisor / Technician

13 years' experience in Document Control for Oil & Gas, Construction and Hydro. Job profile: Updates and maintains a comprehensive project Document Control record keeping system. Interfaces with various departments for required documents associated with distribution and copy requirements of engineering, supplier and technical data as per project procedures. Knowledge of document numbering, workflow, EDRM and matrix creation. Expediting the review and approval of documentation, including designs, procedures, instructions, product certification and records. Register, transmit, distribute and control all electronic and hardcopy project drawings. Maintaining a correspondence filing system for easy traceability and updating of all Project documentation. Provide refresher training for the team on the EDMS, workflow and project requirement.

19 years’ diverse range of relevant experience in the oil and gas Brownfield/Greenfield. Contribute a dynamic, result - oriented and offering focus leadership in delivering safety and project as Offshore Construction Site Representative within time frame and budget given. Consistently achieve performance goal through enthusiasm, tenacity and initiative, which complement knowledge / expertise in upstream and downstream.

Superintendent, Other, Manager

Having solid experience in M&E and Project Management in various industries such as Port & Terminals, Kernel Crushing Plants, Palm Oil Mills and Industrial Pumps.

Engineer, Supervisor / Technician

Hello, I'm Arimby graduated from PPNS-ITS with major Piping Engineering Department, I have more than 7 years of working experience in Oil and Gas Company. I know and understand about pipe design and drafting, pipe stress analysis, piping isometric, piping fabrication and welding, DT & NDT, piping system on ship, fluid mechanism, pipe support system, etc. Know about code and standard, such as: ASME B31 Series, ASME sec XIII, API 650, etc. Have spirit, discipline, fast learner, hard worker, and high loyalty. I can work individually or team.

Engineer

Ø Seventeen Years of combined Piping Engineering Experience (Project Engineering, Package, Supervision, Design, Quality Control and Drawing Detailing) Ø Conversant in 2D Microstation Software Ø Conversant in PDS 3D Modeling Software for Piping and Equipment Ø Conversant in PDMS Modeling Software for Piping and Equipment Ø Conversant in SMART Plant Review (SPR) Ø Conversant in Navis Works Ø Conversant in E3D Software Ø Conversant in MS Office Applications (Word and Excel) Ø Knowledgeable in Engineering Applications (AutoCAD R2004-R2007) Ø Adept in oral and written English  

Engineer, Drafter / Designer

I am Dair Djuwari Ngadenan experiences in drilling as Chief Mechanic more than 15 years

Supervisor / Technician

Seasoned HSE professional with several years of experience in the oil and gas industry. Skilled in implementing and auditing ISO management systems, ensuring compliance and operational excellence. Extensive experience across multiple disciplines, including T&I campaigns, marine operations, subsea projects, inspections, and NDT. Proven track record of working with various operator OPUs, driving safety and efficiency in high-risk environments.

Other

·    I am a Mechanical Piping Engineer with 26+ years of experience.. I have a diverse engineering background with valuable experience in the oil and gas industry specifically in the upstream engineering phase (specifically Oil and Gas EPCIC Project, Offshore Facilities with 12 years of Piping Engineering, project development, construction and HUC in Operator Organization) in and marine. ·    Experience as Piping Engineering Lead for project development from FEED, Detail Design Engineering, Construction and Offshore Commissioning. ·    Knowledge of producing specifications and datasheet for piping materials, manual Valves and Special Piping items and Equipment datasheet.  ·    Familiar of industry piping design codes, pipe fitting codes, flange codes, valve codes such as ASME B31.3/B16.05/B16.09/B16.10/B16.11/B16.25/B16.47 and API /RP14J/5L/6D/598/602/608/609. ·    Knowledge of interpreting the design process from the process documents such as the PFD,P&ID and to implement it to the detail design of the process system. ·    Experience in preparing piping engineering documents such as Piping Material Specification, Manual Valve Specification, Piping Insulation, Manual Valve Datasheet, Special Piping Material Datasheet and to perform verification of piping wall thickness calculation by design office. ·    Completely familiar with various computer software and applications such as WinPCs, CAESAR II, Naviswork (for 3D Modelling Review) , AutoCAD, Microsoft Office (Words, Excel & PowerPoint) and Microsoft Project. ·    Experience in technical and commercial bid evaluations of the mechanical equipment packages and piping materials.  ·    Capable of giving technical recommendation of piping materials, valves, special piping item and static equipment component. 

Engineer

I have extensive experience in technical support and expertise in Tubular Running Services (TRS) and Drilling with Casing (DwC), Structural Dynamic Monitoring for Production Platform, Transportation and Installation (T&I), mooring buoy maintenance, vessel operations and well testing. I provide critical support for operations and customer issues, manage maintenance strategies to ensure equipment reliability using MyAdvisor, and oversee quality assurance processes. My role includes developing and executing training programs, coordinating and supervising project activities, and leading operational readiness efforts including critical testing and maintenance. I excel in optimizing facility efficiency, managing field and workshop operations, and executing offshore engineering projects. My commitment to safety is demonstrated through rigorous protocol implementation and active participation in HSE activity in workplace ensuring a culture of safety and compliance in all operational contexts. ● Technical Support and Subject Matter Expertise: Provide technical support for operations and customers, acting as a Subject Matter Expert (SME) in Tubular Running Services (TRS) and Drilling with Casing (DwC) and structural dynamic monitoring for production platform. Address technical issues, assist in incident investigations, and interface with personnel, management, and customers on training and tool failures. ● Maintenance Strategy and Equipment Reliability: Develop and implement maintenance strategies toensure equipment reliability. Utilize MyAdvisor (Weatherford’s Computerized Maintenance System) to monitor preventive maintenance and drive continuous improvement in equipment performance and compliance with API requirements. ● Quality Assurance and Compliance: Oversee QAQC checks of equipment for Third Party Inspection (TPI) and ensure adherence to quality standards. Manage corrective and preventive action reports, internal and external audits, and approval of job reports to maintain high-quality standards. ● Training and Competence Management: Monitor and manage the training and competence strategy for field and workshop personnel. Ensure that equipment upgrade bulletins are implemented and followed and participate in the creation and revision of technical work instructions. ● Project Coordination and Supervision: Coordinate and supervise activities of service or technical personnel, including job or project management, administration, and technical support. Manage the planning and execution of projects, ensuring compliance with safety and operational standards. ● Operational Readiness and Technical Testing: Lead operational readiness efforts with meticulous tracking via excel, Microsoft Project and Primavera P6 and technical test e.g Factory acceptance test, fit and function test, and hydrotest. ● Facility Optimization and Maintenance: Lead initiatives to improve facility efficiency and reduce downtime. Coordinate preventive maintenance activities and optimize strategies to save costs and enhance production capacity. ● Field and Workshop Management: Manage the activities of service or technical personnel, ensuring effective performance and adherence to project requirements. Support competency assessments and quality checks in various operational contexts. ● Offshore and Marine Engineering: Lead and execute offshore platform structural dynamic monitoring, offshore transportation and installation, and maintenance services for mooring buoys. Oversee project planning, equipment readiness, and procedural documentation for offshore operations. ● Project Engineering and Execution: Manage and coordinate various engineering projects, including well testing services, flowline export hose procurement, deperming system installations, relocations of FPSO, and structural dynamic monitoring for production platform. Ensure project deliverables meet technical specifications and client requirements. ● Process Improvement and Efficiency: Conduct time studies and streamline material handling and flow procedures to enhance workplace efficiency. Develop equipment layout plans and track inventory data to support key decision-making and increase productivity. ● Safety Leadership: Implement and oversee safety protocols, ensuring safe handling of hazardous materials and adherence to safety standards. Act as service excellence focal person who act as technical reference for safety and quality hence promoting a culture of safety within operational teams. ● Systems Utilization and Technology Skills. Proficient use of Windows and Mac operating systems, well versed with MS Office Suite (Word, Excel, PowerPoint) , Microsoft project , Primavera P6, Inventor, ANSYS, AutoCAD.

Engineer, Supervisor / Technician

Results-driven and detail-oriented professional with a solid background in mechanical engineering & technology and extensive experience in project management, maintenance, and operations. Seeking a challenging and dynamic role where I can leverage my diverse skill set to contribute to the bottom-line effectiveness of my department and drive the success of the organization. Passionate about delivering high-quality work and exceeding expectations, I am committed to utilizing my expertise in project management, planning, coordination, and team leadership to achieve outstanding results in a collaborative and innovative environment all over the world

Manager