Layout freelance

A total of about eleven +years (11+) of experience in designing offshore Platforms, FPSO modules with exposure to Concept, FEED and Detailed/Brown field Engineering including In-service (In-place, Seismic, Spectral Fatigue) and Pre-service analysis (Launch, Loadout, Lift and Transportation), design of trunnions, miscellaneous designs/installation related engineering and knowledge of codes and standards. Other activities handled include preparation of technical specifications, design basis, scope of work for sub-contractors, purchase requisitions, technical bid evaluations, Offshore Site Engineering Survey, co-ordination with Yard / Site / Sub Contractors, handling queries from the Client & Yard, etc.

Engineer, Manager

My career as Piping Designer & Tekla Designer in engineering & Construction Oil& Gas Refinery. Chemical fabrication and manufacturing.

Drafter / Designer, Engineer, Superintendent, Supervisor / Technician

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

A Bachelor Mechanical Engineering with six years of experience working for several project in EPC Industries such as: PT. Pertamina (Persero), PT. Chandra Asri Petrochemicals, PT. Pupuk Iskandar Muda (Fertilizer Plant), Star Energy, LTD, etc.

Engineer

Detail-oriented, organized and meticulous employee. Works at fast-paced environment to meet tight deadlines. Enthusiastic team player ready to contribute to company success. To seek and maintain full-time position that offers professional challenges utilizing interpersonal skills, excellent time management and problem-solving skills.

Engineer

Experienced Piping Stress Engineer in analyzing and designing piping systems to ensure structural integrity and compliance with industry standards. Proficient in stress analysis, pipe support design, and leveraging advanced software tool such as CAESAR II. Demonstrated expertise in performing complex calculations, evaluating thermal and mechanical stresses, and providing solutions to mitigate potential issues. Adept at collaborating with multidisciplinary teams to deliver high-quality engineering solutions on schedule and within budget.

Engineer, Drafter / Designer

graduated in

Drafter / Designer

Seeking an opportunity in a well-established organization within the engineering at oil & gas industries on stages of conceptual design, FEED, detail engineering, onshore & offshore platforms, green field (new plant) & brownfield (existing, modification) and petrochemical project, where my technical expertise can be fully utilized, and I can pursue further career development.

Engineer

Marine engineer with COC class III 750kW or more unlimited trade voyages.

Engineer

SUMMARY Engineering Manager with Process engineering background with more than 26 years' operation and engineering experience within Oil and Gas industry in Azerbaijan and proven leadership skills. Project and engineering design operation experience gained by working for EQUINOR, BP and SOCAR both onshore and offshore Greenfield and Brownfield modification projects (including engineering of subsea production system with wet tree)Engineering design experience gained within design contractor environment. Experience to work in a multiple project, build and manage diverse teams of engineering from different disciplines, formulate and execute strategies, and coordinate with project managers. With responsibilities includes researching and developing new design, proposing project budgets, and overseeing all the activities related to each project. Has an exceptional foresight, great communication skills, working knowledge of different engineering disciplines and an aptitude for managing risk.

Engineer, Manager

Well organized and motivated piping engineer with a demonstrated ability to work in high stress condition, skilled individual with experience over 10+ years in engineering design of piping/ pipelines. Handles various projects including piping for power plant, industrial, chemical and oil & gas industries.

Engineer

I have more than 12 (twelve) years of working experiences combined as a Mechanical & Piping Engineer with comprehensive knowledge of piping-mechanical static design and construction. I have been assigned in FEED, various proposals & EPC project executions for Oil & Gas, Petrochemical, Fertilizer and Power Plant industries. I have been involved in : + Project start stage activity such as determining stress calculation line, scheduling and planning distribution work load for engineer and other preparation work. + Basic engineering stage activity such as prepare datasheet, preliminary loading data, specification and other technical data. + Before PO stage activity namely; performing Technical Requisition for request vendor technical and commercial quotation, TQ before PO and Technical Bid Evaluation. + After PO stage activity i.e. ; Engineering detail design phase, verifying vendor prints and equipment calculations, interdisciplinary coordination. + Construction phase such as subcont assessment, reviewing vendor print, review and approve all construction work & inspections.

Engineer

Mechanical Engineer with 20 years of experience in Boiler, Furnace and Static equipment Design, Installation, Construction and Pre-Commissioning till Handover to Client. Technical review of method statements for lifting and installation of equipment’s, other procedures as per the client requirement. Review of 3D drawings of overall layout and performed clash check and maintenance integrity by superimposing all other discipline models.

Engineer

·       20+ years of Design & Engineering, Project Management  experience for Refinery & Petrochemical Plant, Power Plant, Substation, OHL Project . ·       Working as Senior Electrical Engineer PMC ADNOC GAS for Maximizing Ethane Recovery and Monetization (MERAM) for ADNOC Gas. ·       Worked as Lead Electrical Engineer for EPCM for Swing Project, ADNOC Onshore. ·       Worked as Lead Electrical Engineer for Hail & Ghasha Development Project, ADNOC Offshore. ·       Worked as Sr. Electrical Engineer for Habshan SS-7 And SS-18 Switch Gear Upgrade Project, ADNOC Gas Processing [https://www.zawya.com/mena/en/project/290420081543/sales-gas-pipeline-network-project/] (AGP). ·       Worked as Lead Electrical Engineer for EPC for Bab Gas Compression Project (BGCP) PHASE-III, ADNOC Onshore. ·       Worked as Lead Electrical Engineer for Sales Gas Pipeline Network Enhancement Project FEED Services, ADNOC Gas Processing [https://www.zawya.com/mena/en/project/290420081543/sales-gas-pipeline-network-project/] (AGP). ·       Worked as Sr. Electrical Engineer for FEED Project Long Term Development Plan (LTDP) Of Crude Oil / Condensate Storage Facilities At Das Island, ADNOC Offshore. ·       Worked as Lead Electrical Engineer for EPC Thai Oil Clean Fuel Project at Petrofac. ·       Worked as Lead Electrical Engineer (Design & Engineering) for Zauliya Gas Plant & Zauliya Gas Compression Project, PDO Oman ·       Worked as Lead Electrical Engineer for 120MW EPC  Haima West Combined Cycle Power Plant ( GE 6FA Gas Turbine & Siemen Steam Turbine), PDO Oman ·       Worked as Lead Electrical Engineer (Design & Engineering) 154.4MW EPC Project Rabab Harweel Power Plant & HRSG Project (GE 6FA Machine), PDO Oman. ·       Worked Lead Electrical Engineer for 120MW EPC Oman LNG Power Plant (Gas Engine, HV/MV/LV Switchgear, Electrical Rooms with all necessary ventilation systems, fire and safety systems, UPS AC/DC, Plant air and Instrument Air System, Black start unit etc). ·       Detailed Engineering for Integrated Gas Development Project, Abu Dhabi Gas Industries Ltd. (GASCO), & Ruwais Refinery Expansion (RRE) Project, Abu Dhabi Oil Refinery Company, (TAKREER). ·       Lead Electrical Engineer for Detail engineering of 2400 MW Combined cycle Project for Ras Al Zour IWPP for Water & Electricity Company (SEC) - Saline Water Conversion Corporation (SWCC) in Saudi Arabia. ·       Detail engineering of Reinforcement of Wadi Al-Dawaser Power Plant (CCPP), Extension II Project, Saudi Electricity Company, Saudi Arabia ·       Detail engineering of Qurayyah Combined Cycle Power Plant, Saudi Electricity Company, Saudi Arabia ·       Detail engineering of 1X80MW Captive Power Plant for Hindustan Zinc Limited, Lead Zinc Smelter Plant Ph-II,1X125MW Captive Power Plant for Rajasthan Vidyut Nigam, Giral, Rajasthan, 8X135MW Thermal Power Plant, Raj West Power Limited, Jaipur, India ·       Experience with Electrical Design Review, SAFOP etc. ·       Review of FEED technical documents/ Amendments, Bid clarifications, Client response to technical clarifications, pre and post tender correspondence ·       Review of Engineering Subcontractors scope and services for Project requirement & review engineering documents schedule submitted by the engineering subcontractor for completeness of scope and adherence to the time schedule. ·       Preparation of MR, Drawings, calculations, MTO etc. inline client specification ensuring quality, engineering Stds, Performance guarantee and project requirements. Review of Bidder’s Technical offer/TQ/TBE/ Vendor Documents. ·       Co-ordination with Design consultants/Vendors/Site for Design related issue. ·       Review & approval for 132kV Substation Engineering Calculation/Layouts and 132kV Over Head Line Plan & Profile Drawings

Engineer, Manager

* Saudi Council of Engineers accredited Architectural Engineer with valid SCE membership. * Highly self-motivated CANADIAN Construction Expert with over 29+ years of experience of large scale Infrastructure, ICI, Heavy Civil, and Oil & Gas projects, including watermain & sewage mainlines projects, structural steel, heavy concrete structures with high end finishes and extensive MEP coordination applications. * Annotative and lucrative project management leadership personality, with professional precession to deliver targets ahead of time and below budget. * Change champion with astute contract administration dexterity. * Solid experience in procedures to ensure optimum application of approved workflows. * Value Engineering professional with multinational Engineering practices experience. * Precision in material takeoffs and tendering estimation for different project types. * Project planning and scheduling proficiency using MS-Project. * Solid technical background and drawings discrepancies solving skills with excellent coordination and liaison skills between all project stakeholders.

Manager, Engineer, Superintendent, Other

Dedicated, high-management standart, talented and result oriented professional to apply hands-on experience in process engineering & field expeirence (pre-commissioning & commissioning engineer). Learning on the Fly, Problem Solving, Intellectual Horsepower, Written Communications, Drive For Results, Decision Quality, Informing, Listening, and Dealing with Ambiguity. Intermediate knowledge of engineering design principles and applicable design guides and standards related to assigned engineering discipline.

Drafter / Designer, Engineer

I am a Mechanical Engineer specializing in innovative HVAC and MEP system design for residential / Non-residential and industrial projects. Over the past two years, I have contributed to designing advanced VRF and VAV systems using tools like AutoCAD, Revit, and Trane Trace 700. My designs meet ASHRAE standards, California building codes, and SMACNA guidelines, ensuring energy efficiency and regulatory compliance. With a proven ability to collaborate remotely, I excel at managing complex projects, meeting deadlines, and delivering solutions tailored to client needs. My focus is on blending technical precision with practical problem-solving to create value for every project. I am currently seeking remote opportunities to apply my expertise in HVAC system design for innovative teams. If you're looking for a detail-oriented engineer with a passion for excellence, I would be thrilled to connect and explore potential opportunities.

Engineer, Drafter / Designer

I hold a Bachelor of Management (Honours) degree from the University of Science Malaysia. My most recent role was as a Project Coordinator and Assistant Warehouse Manager at TechnipFMC. With over 20 years of experience in logistics and warehousing within the oil and gas drilling, completion, and manufacturing sectors, I bring a wealth of expertise that can significantly contribute to your organization.  My background includes effectively managing warehousing operations and ensuring seamless logistics processes. Additionally, I have been a part of the Internal Audit Team for the Quality Management System (QMS),  ensuring alignment with both local and global standards. I am confident that my dedication, skills, and extensive experience position me as a strong asset to your team. I am enthusiastic about the opportunity to contribute to your organization and am eager to bring my knowledge and passion to this role.

Supervisor / Technician, Manager

• Total 4.8 years in piping design and modelling • Experienced in creating detailed pipe drawings section drawings and supports details for projects in the oil & gas industry by using International Codes & Standards (ASME B-31.3) • 3D modeling of piping, mechanical equipment like pumps, heat exchangers, process columns etc. in AVEVA PDMS, E3D,SP3D • Produced General Equipment Arrangements, Orthographic, Elevation, Detail, and Isometric drawings for clients.

Engineer, Drafter / Designer

Experienced Piping Designer with over 10 years of expertise in designing, planning, and executing piping systems for Petrochemical, Oil & Gas, Pharmaceutical and Power generation projects. Proficient in using industry-standard software such as AutoCAD, Smart3d, Cadworx, PDMS, Autocad Plant 3d, Navisworks and Microstation to develop detailed piping layouts, isometrics, and 3D models. Adept at interpreting P&IDs, ensuring compliance with industry codes (ASME, API, ANSI, JIS), and collaborating with cross-functional teams to optimize design efficiency and project timelines. Completed training in Revit software operation and Revit MEP-Fire Protection System, gaining expertise in 3D modeling and BIM implementation for project planning and coordination. With strong time-management and problem-solving skills to meet tight schedule even in a demanding situation. Highly innovative and very adaptable in resolving design challenges and creating process improvement to increase efficiency and client satisfaction.

Drafter / Designer, Engineer

i'm a Fresh Graduate with a Bachelor's degree in Electrical Engineering from Siliwangi University, with a strong foundation in electrical system design and analysis. Proficient in using AutoCAD to create detailed electrical schematics and layouts, I have hands-on experience in designing and optimizing electrical circuits and distribution systems. My academic background is complemented by practical skills in power system planning, simulation tools (such as ETAP and MATLAB), and project management. I am passionate about leveraging my technical skills and problem-solving abilities to contribute to innovative and efficient engineering solutions. With excellent attention to detail and adaptability, I am ready to tackle challenges in the engineering field and continuously develop my expertise

Drafter / Designer, Inspector, Engineer, Manager

Chemical Engineer-PhD with more than ten years' experience in the industry mainly the energy sector (Oil & Gas fields, development center and engineering office) and pharmaceutical sector (R&D, plant). Responsible, detail-oriented inclined person with a high team-work spirit, with ability to work on challenging projects in a multi-cultural and international environment. I am passionate about climate protection and energy transition.

Engineer, Manager

I'm highly motivated Instrumentation Design Engineer with over than 19 years experiences in process plant design, oil & gas, and industries. I have work with many high-profile clients, national or multinational contractor to execute several large engineering projects and EPCC project. I have involved in the implementation of various stage of design such as Conceptual, FEED, Detail Design project in Instrumentation and Control and Electrical for oil and gas and industry.

Engineer, Drafter / Designer

Previously work as Instrument E3D Designer at MMHE Sdn.Bhd, a company based in Pasir Gudang, Malaysia providing platform fabrication and shipbuilding. Technical and services for oil & gas industry. Ten years of working experiences in multi disciples that includes designing, manufacturing, and hands-on both electrical and mechanical work fields.

Drafter / Designer