Layout freelance

As Instrument & Control Engineer with +6 years of work experience in EPCC (Engineering, Procurement, Construction and Commissioning) for Oil & Gas, Power Plant and Petrochemical Project. Have experience in calculating, designing, installing, and maintaining industrial instrumentation systems. Develope documents such as, General Specification, Datasheet Field Instrument (Pressure, Temperature, Analyzer, Level and Flow), Calculation of Relief Valve, Control Valve and Design wiring of Field Instrument, Loop Diagram, Logic Diagram, Block Diagram and Control Sytem Architecture Diagram / ICSS Architecture Diagram. Also have in-depth knowledge of various instruments and process controls used in industrial settings, including sensors, transmitters, PID control, and automated control systems.

Engineer

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

A total of about eleven +years (11+) of experience in designing offshore Platforms, FPSO modules with exposure to Concept, FEED and Detailed/Brown field Engineering including In-service (In-place, Seismic, Spectral Fatigue) and Pre-service analysis (Launch, Loadout, Lift and Transportation), design of trunnions, miscellaneous designs/installation related engineering and knowledge of codes and standards. Other activities handled include preparation of technical specifications, design basis, scope of work for sub-contractors, purchase requisitions, technical bid evaluations, Offshore Site Engineering Survey, co-ordination with Yard / Site / Sub Contractors, handling queries from the Client & Yard, etc.

Engineer, Manager

Summary: Detail-oriented PE with 5 years of experience and a zest for solving complex problems. Seeking to use proven project management and design skills to improve quality, cost and time

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

A Bachelor Mechanical Engineering with six years of experience working for several project in EPC Industries such as: PT. Pertamina (Persero), PT. Chandra Asri Petrochemicals, PT. Pupuk Iskandar Muda (Fertilizer Plant), Star Energy, LTD, etc.

Engineer

I would like to apply my professional resume with experience more than 14 years in EPC & Oil and Gas Project of Piping Designer (AP3D/SP3D/AutoCAD). For this moment I'm currently working in Engineering Procject for PT Mipcon Konsultan Utama starting since January 2018 until present. I'm had been finished for MSM New Turbine Plant Project in Sumba & Jakarta, and my specialist in this sector are piping 3D designer. And pipe modification at PERTAMINA EP SUBANG for piping design & structure platform designer. And for the last of more than 7 years I had been in piping/mechanical, structure designer & draftsman position for any engineering project in Mipcon Konsultan Utama.   I'm sure that I'm qualified and have much experiences for the position. Wish that I'm the one of which company need for. I'm hard worker who can work with the team, English speaking and writing, good for color vision and good in high places. Best wishes that I would get the opportunity and be part of the team.  

Drafter / Designer, Engineer

I have more than 16 years of built environment, Project management experience in oil and gas, power and large complex infrastructure projects.

Engineer, Manager, Superintendent, Other

Experienced Piping Stress Engineer in analyzing and designing piping systems to ensure structural integrity and compliance with industry standards. Proficient in stress analysis, pipe support design, and leveraging advanced software tool such as CAESAR II. Demonstrated expertise in performing complex calculations, evaluating thermal and mechanical stresses, and providing solutions to mitigate potential issues. Adept at collaborating with multidisciplinary teams to deliver high-quality engineering solutions on schedule and within budget.

Engineer, Drafter / Designer

I have more than 12 (twelve) years of working experiences combined as a Mechanical & Piping Engineer with comprehensive knowledge of piping-mechanical static design and construction. I have been assigned in FEED, various proposals & EPC project executions for Oil & Gas, Petrochemical, Fertilizer and Power Plant industries. I have been involved in : + Project start stage activity such as determining stress calculation line, scheduling and planning distribution work load for engineer and other preparation work. + Basic engineering stage activity such as prepare datasheet, preliminary loading data, specification and other technical data. + Before PO stage activity namely; performing Technical Requisition for request vendor technical and commercial quotation, TQ before PO and Technical Bid Evaluation. + After PO stage activity i.e. ; Engineering detail design phase, verifying vendor prints and equipment calculations, interdisciplinary coordination. + Construction phase such as subcont assessment, reviewing vendor print, review and approve all construction work & inspections.

Engineer

SUMMARY Engineering Manager with Process engineering background with more than 26 years' operation and engineering experience within Oil and Gas industry in Azerbaijan and proven leadership skills. Project and engineering design operation experience gained by working for EQUINOR, BP and SOCAR both onshore and offshore Greenfield and Brownfield modification projects (including engineering of subsea production system with wet tree)Engineering design experience gained within design contractor environment. Experience to work in a multiple project, build and manage diverse teams of engineering from different disciplines, formulate and execute strategies, and coordinate with project managers. With responsibilities includes researching and developing new design, proposing project budgets, and overseeing all the activities related to each project. Has an exceptional foresight, great communication skills, working knowledge of different engineering disciplines and an aptitude for managing risk.

Engineer, Manager

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Experienced Electrical Designer with over 13 years in the offshore and shipbuilding industries, including 3 years in Engineering Management. Proven expertise in SP3D/SM3D modeling, electrical system design, and inter-discipline coordination. Adept at preparing and supervising electrical deliverables, including ship design elements such as docking plans, shell expansion plans, and general arrangement plans. Demonstrated ability to thrive in high-pressure environments, with strong interpersonal skills and a commitment to delivering high-quality work. Dedicated to continuous learning and improvement in a dynamic and evolving field.

Drafter / Designer, Engineer, Manager

I have competence and knowledge of piping and Mechanical engineering knowledge, besides that I can operate the AutoCAD Software, Aveva PDMS 3D, AVEVA E3D, CAESAR II, Autodesk 3D Plant, Bentley Autopipe, Visio, Microsoft Project, Power Point, Microsoft Excel, and Microsoft Office, I familiar about standard ASME and API and also have an certificate, namely piping 3D & Modeling using AVEVA PDMS, AVEVA E3D software and certification stress analysis with CAESAR II software.

Engineer, Drafter / Designer

Marine engineer with COC class III 750kW or more unlimited trade voyages.

Engineer

Mechanical Engineer with 20 years of experience in Boiler, Furnace and Static equipment Design, Installation, Construction and Pre-Commissioning till Handover to Client. Technical review of method statements for lifting and installation of equipment’s, other procedures as per the client requirement. Review of 3D drawings of overall layout and performed clash check and maintenance integrity by superimposing all other discipline models.

Engineer

An enthusiastic, energetic, and experienced Chemical Engineer with over 14 years of experience in Operations, Systems Engineering, Installation, Commissioning, Maintenance, WANO Peer Reviews and Design review for PWR Nuclear Power Plants. Throughout my career, I have consistently demonstrated strong work ethics, led multidisciplinary teams successfully, and have gained valuable experience in system analysis, troubleshooting, equipment maintenance, plant operations and design review. During the commissioning phase, I have carried out cold/hot tests, pre-startup tests, turbine rolling; reactor critically and load rejection tests jointly with CNNC, CZEC and QNPC. I have vast experience of nuclear reactor operations as a senior reactor operator. Being an SRO and shift engineer, I have worked with WANO teams to focus on one goal: “Excellence in Nuclear and industrial Safety, and to maximize nuclear safety and reliability of nuclear power plant.”

Engineer, Drafter / Designer

Ø Seventeen Years of combined Piping Engineering Experience (Project Engineering, Package, Supervision, Design, Quality Control and Drawing Detailing) Ø Conversant in 2D Microstation Software Ø Conversant in PDS 3D Modeling Software for Piping and Equipment Ø Conversant in PDMS Modeling Software for Piping and Equipment Ø Conversant in SMART Plant Review (SPR) Ø Conversant in Navis Works Ø Conversant in E3D Software Ø Conversant in MS Office Applications (Word and Excel) Ø Knowledgeable in Engineering Applications (AutoCAD R2004-R2007) Ø Adept in oral and written English  

Engineer, Drafter / Designer

I had more than twenty seven (27) years of experience involved in Engineering Procurement construction & Management and Front End Engineering and Design industry for major Oil & Gas, Refinery, Petrochemical Plant, Chemical Plant, Power Plant, Onshore, Ofshore Platform, FPSO (Floating Production Storage and Ofloading), FLNG (Floating LNG), FRU, FSRU. Capable to prepare Piping Layout, Equipment Layout, Pipe support and Isometric drawings through the aid of computer programs such as, E3D Aveva, PDMS Aveva, MDS Aveva, SP3D, AP3D, PDS, I-sketch, Micro station, AutoCAD. Navigating PDMS Review, Navisworks, SPR (Smart Plant Review), Point Cloud (Laser Scan/LFM) and True View.Capable to prepare MTO. Good working knowledge and understanding on piping design, installation and fabrication practices, including application of Industrial standards like (ASME, API, ANSI, NFPA, JIS, KS, Aramco Standard AND Norsok Standard).

Engineer, Drafter / Designer

graduated in

Drafter / Designer

Well organized and motivated piping engineer with a demonstrated ability to work in high stress condition, skilled individual with experience over 10+ years in engineering design of piping/ pipelines. Handles various projects including piping for power plant, industrial, chemical and oil & gas industries.

Engineer

Dedicated, high-management standart, talented and result oriented professional to apply hands-on experience in process engineering & field expeirence (pre-commissioning & commissioning engineer). Learning on the Fly, Problem Solving, Intellectual Horsepower, Written Communications, Drive For Results, Decision Quality, Informing, Listening, and Dealing with Ambiguity. Intermediate knowledge of engineering design principles and applicable design guides and standards related to assigned engineering discipline.

Drafter / Designer, Engineer

·       20+ years of Design & Engineering, Project Management  experience for Refinery & Petrochemical Plant, Power Plant, Substation, OHL Project . ·       Working as Senior Electrical Engineer PMC ADNOC GAS for Maximizing Ethane Recovery and Monetization (MERAM) for ADNOC Gas. ·       Worked as Lead Electrical Engineer for EPCM for Swing Project, ADNOC Onshore. ·       Worked as Lead Electrical Engineer for Hail & Ghasha Development Project, ADNOC Offshore. ·       Worked as Sr. Electrical Engineer for Habshan SS-7 And SS-18 Switch Gear Upgrade Project, ADNOC Gas Processing [https://www.zawya.com/mena/en/project/290420081543/sales-gas-pipeline-network-project/] (AGP). ·       Worked as Lead Electrical Engineer for EPC for Bab Gas Compression Project (BGCP) PHASE-III, ADNOC Onshore. ·       Worked as Lead Electrical Engineer for Sales Gas Pipeline Network Enhancement Project FEED Services, ADNOC Gas Processing [https://www.zawya.com/mena/en/project/290420081543/sales-gas-pipeline-network-project/] (AGP). ·       Worked as Sr. Electrical Engineer for FEED Project Long Term Development Plan (LTDP) Of Crude Oil / Condensate Storage Facilities At Das Island, ADNOC Offshore. ·       Worked as Lead Electrical Engineer for EPC Thai Oil Clean Fuel Project at Petrofac. ·       Worked as Lead Electrical Engineer (Design & Engineering) for Zauliya Gas Plant & Zauliya Gas Compression Project, PDO Oman ·       Worked as Lead Electrical Engineer for 120MW EPC  Haima West Combined Cycle Power Plant ( GE 6FA Gas Turbine & Siemen Steam Turbine), PDO Oman ·       Worked as Lead Electrical Engineer (Design & Engineering) 154.4MW EPC Project Rabab Harweel Power Plant & HRSG Project (GE 6FA Machine), PDO Oman. ·       Worked Lead Electrical Engineer for 120MW EPC Oman LNG Power Plant (Gas Engine, HV/MV/LV Switchgear, Electrical Rooms with all necessary ventilation systems, fire and safety systems, UPS AC/DC, Plant air and Instrument Air System, Black start unit etc). ·       Detailed Engineering for Integrated Gas Development Project, Abu Dhabi Gas Industries Ltd. (GASCO), & Ruwais Refinery Expansion (RRE) Project, Abu Dhabi Oil Refinery Company, (TAKREER). ·       Lead Electrical Engineer for Detail engineering of 2400 MW Combined cycle Project for Ras Al Zour IWPP for Water & Electricity Company (SEC) - Saline Water Conversion Corporation (SWCC) in Saudi Arabia. ·       Detail engineering of Reinforcement of Wadi Al-Dawaser Power Plant (CCPP), Extension II Project, Saudi Electricity Company, Saudi Arabia ·       Detail engineering of Qurayyah Combined Cycle Power Plant, Saudi Electricity Company, Saudi Arabia ·       Detail engineering of 1X80MW Captive Power Plant for Hindustan Zinc Limited, Lead Zinc Smelter Plant Ph-II,1X125MW Captive Power Plant for Rajasthan Vidyut Nigam, Giral, Rajasthan, 8X135MW Thermal Power Plant, Raj West Power Limited, Jaipur, India ·       Experience with Electrical Design Review, SAFOP etc. ·       Review of FEED technical documents/ Amendments, Bid clarifications, Client response to technical clarifications, pre and post tender correspondence ·       Review of Engineering Subcontractors scope and services for Project requirement & review engineering documents schedule submitted by the engineering subcontractor for completeness of scope and adherence to the time schedule. ·       Preparation of MR, Drawings, calculations, MTO etc. inline client specification ensuring quality, engineering Stds, Performance guarantee and project requirements. Review of Bidder’s Technical offer/TQ/TBE/ Vendor Documents. ·       Co-ordination with Design consultants/Vendors/Site for Design related issue. ·       Review & approval for 132kV Substation Engineering Calculation/Layouts and 132kV Over Head Line Plan & Profile Drawings

Engineer, Manager

I have 12years experience in AutoCAD, E3D, and PDMS, I specialize in creating precise 2D and 3D designs, including generate layouts, piping isometrics, pipe support and equipment placements. My expertise includes plant layout, skid design, and equipment modeling. I am known for my attention to detail, teamwork, and ability to deliver quality results on time.

Drafter / Designer