Project freelance

Mechanical Engineer with 5+ years of experience in EPC oil & gas projects specializing in Static & Rotating equipment design, selection, and engineering support for onshore and offshore applications. Strong background in centrifugal pumps, skid systems, API 650 tank, and vendor package engineering, including technical bid evaluation (TBE), vendor data review (VDR), FAT/SAT support, and installation engineering. Experienced in FEED and detailed engineering, with working knowledge of API, ASME, ISO, and PTS standards. Proven ability to coordinate across disciplines and deliver practical engineering solutions aligned with project specifications.

Engineer

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

1985 – 1997; Blue collar (onshore construction/heavy lift) 1998 – 2002; Full-time University student (working part-time) 2003 – present; White collar (marine engineering)

Engineer

Multi-skilled project management professional with more than 22 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

Adaptable and innovative qualified Mechanical Engineer with over 15 years of experience in the power generation sector. My experience includes working within maintenance, installation, and commissioning power stations, especially gas and steam turbines in the most best-selling brands in different capacities such as; GE, Alstom , Siemens, Mitsubishi and Ansaldo Energia. I have ability to analyze engineering problems, evaluate and recommend alternative solutions and communicate recommendations effectively with strengths include ability to work in multinational environment, good problem solving, hands on team player, able to work at all levels and under pressure, self motivated, energetic with leading management and strong communications skills. I have always been intrigued by and cherished the idea of working in a competitive environment and been seeking an opportunity to express my potentials.

Engineer

Dear Hiring Manager,   I am writing to express my interest in the current position at your company. With over 9 years of experience in project engineering and client relationship management within the oil and gas and marine sectors, I am excited about the opportunity to contribute my skills and expertise to your esteemed company.   In my current role as a Project Engineer at ADC Energy Ltd, I have successfully driven sales initiatives that resulted in substantial revenue growth and increased market share. My strong technical background, coupled with my ability to build and maintain client relationships, has enabled me to identify and capitalize on emerging market trends and opportunities. I am adept at conducting thorough market analysis, developing strategic sales plans, and delivering customized solutions that address clients' needs.   My experience at Pronal Sdn Bhd has further solidified my proficiency in managing complex sales cycles and leading cross-functional teams to achieve project objectives. By fostering collaborative relationships with stakeholders and delivering on promises, I have consistently exceeded sales targets and contributed to overall business growth. My commitment to understanding customer pain points has allowed me to tailor solutions that not only meet but exceed expectations, enhancing customer satisfaction and loyalty.   Holding an MBA in General Management and a degree in Electrical & Electronics Engineering, I bring a unique blend of technical knowledge and sales acumen to the table. I am eager to leverage my expertise in the marine industry to help your company achieve its sales objectives and enhance its market presence.   Thank you for considering my application for the position. I look forward to the opportunity to discuss how my experience and vision align with the goals of your team. I am available for an interview at your earliest convenience.   Sincerely,   Ahmed Mukhtar

Engineer

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

3+ years experience in electrical field in Oil and Gas (Onshore & Offshore) and EPC (Hydropower) company. Having relevant experience in maintenance, engineering, project development, and contract. Currently developing knowledge in steady state analysis such as Load Flow Analysis, Short Circuit Analysis, Motor Starting, Transient Stability, Protection Coordination, Arc Flash Studies and Harmonic Analysis using ETAP and DIgSILENT PowerFactory. Also for transient analysis in Insulation Coordination such as Temporary Overvoltage (TOV), Switching Front Overvoltage (SFO), Fast Front Overvoltage (FFO), Transient Recovery Voltage, Very Fast Transient Overvoltage (VFTO) using PSCAD/EMTDC. Familiar both national and international standards such as SPLN, IEC, NEMA, NEC, IEEE, ANSI and NFPA

Engineer

Certified Professional Electrical Engineer with experience for various proposals and projects, FEED (Front End Engineering Design), Detail Engineering & Project Execution such as oil & gas, power plant, substation, refinery, petrochemical, onshore and offshore, FPSO and LNG plants with value US $10K – $17Bio. In every project, apply standard engineering methods, international and local regulations, techniques, procedures, and design criteria. Possesses passion for working well , agile and skilful as a professional engineer in a multi-project. Expertise  * Experience in oil & gas infrastructure and facilities development, conceptual and FEED design through to detail design and construction in Offshore and onshore Mega greenfield and brownfield projects. * Engineering experience in design as Electrical Design Engineer and construction of electrical systems for upstream and downstream facilities including HV /MV electrical generation, transmission and distribution. * Perform and review electrical calculation and study such as cable sizing calculation, UPS calculation, load balance calculation, understanding of substations equipment selection and sizing, utilizing Power System software. * Well-versed with Engineering software such as ETAP, Dialux, CAD, Smartplant Electrical (SPEL), Smart plant Material (SPmat) / Marian, National and International Standards and Company specifications. 

Engineer, Superintendent, Manager

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

About ten (10) years working experience in ranged from Mechanical engineer, Construction Engineer, and Project Engineer who responsible in technical work such as design, calculation, work planning, project control, and engineering documentation. He also responsible to manage site work and delegate work among team from various department.

Engineer, Supervisor / Technician

Senior Upstream Oil and Gas industry technical professional; over 25 years' experience providing solutions in demanding engineering, operations, and project management roles. Extensive global network. Key skills include: Comprehensive E&P Industry knowledge: Thorough understanding of the key fundamentals of the E&P industries' engineering disciplines. Proven ability to leverage these effectively to create business value and reduce HSSE risk. Project Management Exploration, Production Use basic and appropriate safety engineering practices, involve workforce in Process Safety, Improve safety culture, shared values in attitude and approach comes from leadership. Manage project delivery schedule, strictly implement project compliance to ensure project delivery complies with regulations. Responsible for project scope, schedule and cost, detailed planning and motitoring progress and delivery during the implementation phase. Operations Management: Expertise leading Field Development and Operational plans. Held line management project, production, maintenance & HSSE responsibility for complex offshore operation with annual CAPEX and OPEX budget. > $100M. Highly experienced and skilled in setting and managing budgets, operations and safety. FPSO's, subsea facilities and pipelines.

Engineer

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

Highly accomplished and certified Project Management and Engineering Coordination professional with 20 years of extensive experience in the delivery of major Oil & Gas projects, including Newbuild, Retrofit, and conversions of FSRU, FLNG, LNGC and FSU. Proven expertise in developing and managing various natural gas and LNG projects across project life-cycle. Project management skills including developing Project Planning, Project Execution Plan, Contracting Strategy, Stakeholder Management, FEED & EPCIC Management. Skilled in coordinating across all functional interfaces, including Procurement, HSE, QA/QC, Class Society (Interface Close-outs), and construction teams. Seeking to leverage PMP-certified project control and specialist knowledge in Topsides/Hull Engineering to drive quality and on-time deliverables.

Manager

Hard Driven hands- on project, construction & commissioning personnel with more than 10 years of operation in oil and gas industry from downstream to upstream scope of work. Able to hold position in multiple layers in organization and independent in most working condition. A team player who listens and understand. Proven track record in major project worth up to RM200mln. At least 2 major EPCC and 2 major shutdown belts in hand.

Manager, Superintendent, Other, Inspector, Engineer, Supervisor / Technician

My name is MOHD HANAFI. 14 years in lifting activity and 5 years as lifting supervisor.

Supervisor / Technician, Inspector

Certified project manager with 15+ years of experience owning all stages of the lifecycle to deliver projects that exceed expectations on time and on budget. Proven expertise strategizing, solution development, business development, business operation, project implementing, and optimizing technology solutions to move a business forward.

Manager

Expert in Medium and Low Voltage (MV/LV) distribution, I bridge the gap between complex engineering design and on-site operational excellence. My experience spans from permanent industrial facilities to the high-pressure environment of global temporary events. Core Expertise: Project Lifecycle: From pre-design and tender process to site surveys and overseeing works worldwide. Technical Design: Specialized in custom equipment, including MV/LV Power Transformers, Switchgear, and control panels. Event Power: Designing and commissioning robust cabling and distribution systems for mobile and large-scale events. I thrive in international environments, ensuring technical compliance and reliability for mission-critical power systems.

Engineer, Drafter / Designer, Superintendent, Inspector, Manager, Supervisor / Technician

An Instrumentation and Control Systems Engineer with almost 14 years of experience in Oil & Gas and Petrochemical sector with hands on involvement across project engineering, commissioning supervision, managing plant maintenance, and planning for safe execution of Annual Turnarounds (TARs). Have contributed to Projects and Maintenance roles with ROO BP, BGC, QAPCO, Hess, Cameron, OneSubsea, OilServ, Chevron, MOL, and OGDCL across USA, Qatar, Iraq, Pakistan, and UAE.

Engineer, Manager, Supervisor / Technician, Superintendent

Results-driven professional with nearly 10 years of experience in plant operations, continuous process improvement, process engineering and process safety, as well as extensive project engineering management skills. Professional development in the areas of sustainability and energy management with extensive experience as a certified ASEAN Energy Manager, a certified Professional Thermal Energy Recovery Technologist, Registered Electrical Energy Manager, and a certified Professional Engineer. Strong attention to detail, as well as strong leadership, stakeholder management and communication skills, which have been demonstrated and practiced throughout the career.

Manager

I have 14 years of experience in various field or industry and have faced a wide range of challenges, learned valuable lessons, and developed a deep understanding of your area of expertise

Engineer, Manager

My personality is trustworthy, honest, high integrity, open minded, energetics, agile, responsible, adaptable, humorous, smart and fast learner. And my orientations are targets, benefits, outputs, outcomes and impacts for company by best quality and on time, firm but have empathetic. I love to expand my experiences by new challenge, although I have been involved in Constructions Project Management for more than 18 years, especially construction management and civil works, both in integrated buildings including MEP (Mechanical Electrical and Plumbing), as well as infrastructures, water resources and special constructions such as hospitals, SUTT, offshore radar towers, reclamation and dredging. I also have experiences for 12 years as Management Consultant for Constructions in projects related to the Indonesian government, private companies, NGOs, Grant and Loan Programs by IBRD, OECF, IDA Credit, ADB, JICA/JBIC, AusAID, etc. I can carry out in all projects process from planning/preconstruction to completed (PHO and FHO), like as the bidding process, proposals, work methods, negotiations and/or auctions, budgeting, scheduling, implementation, construction, cost control, quality control and assurance, rescheduling, equipment and man power analysis, contract changes orders, variation orders, and others activities to completed the project implementation. My main frames to implementation the projects are CTQ-HSSE (Cost, Time Schedule, Quality - Health Safety Security and Environments). Tools of CTQ that are Methods of Work, Permits to Work (PTW), site inspection, defects list, punch list, weekly meeting, and others. Tools control of HSSE that are Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA), Site Supervision, Tool box meetings (TBM), Safety morning, etc. Important things to support the implementation of CTQ-HSSE are Quality Management System (QMS) and Standard Operating Procedure (SOP). By the references standard are : ISO 9001, ISO 14001, OHSAS 18001 or ISO 45001 and SMK3. The main literature to run projects are PMBOK and others to Define, Plan, Organized, Action, Control and Close up (D'POAC-C) supported by RCSA to deal with risks, SWOT analysis for problem solving, and HIRA for Health Safety Security and Environments assurance. While the software and computer programs that I use are Microsoft Project, Microsoft Office (Excel, Power point, Word, Outlook, etc.), supported by other engineering software such as AutoCad, SketchUp, SAP2000, Etabs, etc. And now, I am looking for a new opportunity to do my best at a right company, as General Manager Construction, Project Manager, Construction Manager, Engineering Manager, Project Plan and Control, or equivalent, at anywhere.

Engineer, Manager, Superintendent

Project Engineer with 6+ years of experience delivering infrastructure and oil & gas projects, specializing in project coordination, HSE compliance, and technical documentation management. Proven ability to support on-time project delivery, improve process efficiency, and ensure regulatory compliance. Adaptable to fast-paced manufacturing environments with strong stakeholder coordination and problem-solving skills.

Engineer

Marine Professional with more than 20 years experience in Ship Management, Shipbuilding and Ship Surveying. Area of specialization: Shipbuilding - New Construction project management. Marine survey - Class survey, Pre Purchase, Condition Survey, etc. ISM/ISPS/ML Audit - Audit and document review. Ship Management - Shore based ship operation, procurement, shore repair, dry docking, etc.

Engineer, Manager, Superintendent