Cost Control freelance

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

Project Control Engineer / Project Scheduler with 5+ years of experience in EPC Oil & Gas projects, including extensive offshore installation, Hook-Up & Commissioning campaigns. Specialized in integrated planning, SIMOPS scheduling, progress measurement, and schedule recovery for complex multi-vessel offshore operations. Proven ability to translate field execution constraints into actionable schedules, support management decision-making through real-time dashboards, and maintain alignment between construction, commissioning, and engineering deliverables.

Engineer

My name is Syahril Dian Purwono, I graduated from Bachelor Degree of Mechanical Engineering Diponegoro University and Master Degree of Civil Engineering at University of Indonesia with a concentration in Project Management. I have a great expertise and interest in Project Management, Plant Maintenance Planning, Business Process Mapping & Integrated Systems. I have 18 years of career experience in various companies, both private and state-owned. My experience and educational background can improve my competence and skills in project management to be applied in my daily work.

Engineer

Senior Project Engineer with 16 years of experience in oil and gas projects, specialising in project engineering, project services, technical studies, technical writing and multidisciplinary coordination. Proven track record in delivering 52 brownfield and technical projects with combined values exceeding USD 100 million for clients including Shell, PETRONAS, Petrofac, CPOC and Hengyuan Refining Company. 

Engineer, Other

Seeking a role in Engineering & Technology Management. Bridging the realms of engineering and business management. EDUCATION PhD (c) Engineering Present (Part Time) UTM Razak Faculty of Technology and Informatics (RFTI),  Univeristy of Technology Malaysia Master of Science Engineering Management Brunel University London, UK Bachelor Degree of Technology Management University of Technology Malaysia Diploma In Technology Metal Fabrication & Welding University of Kuala Lumpur (MFI) Certificates in Metal Fabrication Technology MARA Skills Institute Total works experience >25 years, Engineering in Production operations fabrication pressure vessels, High-precision fabrication manufacturing, Equipment procurement engineering, L&D Training Education Industry & Technical Vocational Education Training (TVET). Management Industry in Government Liaison, Corporate Affairs, Corporate Communications, Stakeholder Liaison, Strategic Planning, Team Leadership, Customer Services, Negotiation, Business Strategy, Continuous Improvements, Research Development, Stakeholders Management, Document Control, Quality, Analytical. Supply Chain Management: Manage and supervise supply chain and procurement activities, including tender processes and direct purchases, ensuring compliance with regulatory standards. large-scale procurement activity budget allocation > $30M - $950M approval by Ministry of Finances (MOF), Economic Planning Unit (EPU) & Ministry of Rural and Regional Development (KLB). Handling setup and establish new campus college techical fields oil & gas programs (Bintulu & Kemaman) were collaborative / corporation with Petronas and oil & gas Industry players. Position of Quality Management Representative (QMR) and Lead Auditor MS ISO/ISO 9001(Quality Assurance), 14001 (Environmental Management) & 13485 (Medical Devices Authority) Software expertise;  Management: Microsoft Project, Microsoft Office (Word, Excel, PowerPoint), Design: Auto Cad, Solid Work, Catia, Adobe Illustrator & Adobe Photoshop. Analyst: ATLAS Ti, SPSS, SMART PLS, Visio, Power BI CoE Programme Planning: Plan and execute the creation and execution of the Centre of Excellence (CoE) program MITI, MIGHT, MIDA, NIOSH, DOSH, CIDB, HRDF, MOF and government agencies Project Management: Create project authorizations and establish cross-functional teams to execute CoE initiatives effectively. Develop strong business cases and relevant strategies to meet project objectives. Case Studies: Conduct and organize case studies as requested by the CoE committee, involving industry participants, academic institutions, and stakeholders. Ensure that case studies exceed investor expectations across various sectors Stakeholder Engagement: Work closely with industry business partners, academic institutions, and stakeholders to ensure the successful implementation of CoE strategies and initiatives. Curriculum Development: Act as the coordinator joint curriculum design and development initiatives with industry partners such as CTRM, SAPURA ENERGY, UEM, PETRONAS, GO AUTO, MRCB, BV, to align educational programs with industry requirements. International Certification and Training: Coordinate with international certification bodies and facilitate short courses for industry professionals, including TWI Malaysia/United Kingdom (CSWIP – Welding Inspection) and INSTITUT DE SOUDURE FRANCE. PROFESSIONAL CERTIFICATE (Fabrication & Welding Technology) Teaching Technique Certificate (VTO) CIAST (Centre for Instructor Advanced Skill Training) Malaysia Quality Control ISO Quality Assurance, HSE, MDA Internal Quality Audit Failure Mode Effect Analyst (FMEA) Advanced product quality planning (APQP) Statistical Process Control (SPC) 7 QC Tools and Six Sigma methodologies Occupational Safety and Health (DOSH) Anti-Corruption Revolutionary Movement (GERAH) Project Management Professional (PMP) Procurement Value Management (VM)

Manager, Other

I am a Project Engineer with over 5 years of hands-on experience in pipeline integrity inspection, project execution, and field engineering within the oil and gas industry. My career has been built around managing and delivering complex in-line inspection (ILI) projects, coordinating multidisciplinary teams, and ensuring compliance with international standards such as ASME B31.8, API 579, API 1163, and API 1169. Throughout my work with major oil and gas operators, I have successfully executed inspection campaigns covering more than 1,800 km of pipelines, ensuring safe and continuous operations without disruption. I take pride in identifying and mitigating critical anomalies that could lead to safety, environmental, or production risks. Beyond technical expertise, I excel in client engagement, vendor management, and project optimization, consistently reducing costs and accelerating timelines while maintaining a 100% safety record. With a background in physics from the University of Southampton, I bring strong analytical skills and problem-solving capabilities. I am passionate about applying my technical foundation to support both integrity management and business development, with a vision of advancing toward commercial and managerial roles in the industry.

Engineer

BEM certified Graduate Engineer with over five years of experience in managing onshore and offshore plant maintenance projects. Experienced in planning and executing maintenance projects involving mechanical piping, structure maintenance, rotating equipment and integrating design engineering principles into execution. Strong execution exposure in SIMOPS environments, PTW controlled activities, shutdown and turnaround support and contractor supervision. Available to start immediately.

Engineer

18 years experience, 15 years spent in Nigeria at our offshore service centre supporting various subsea projects. Setup, managed and executed various tree build projects in country as well as project managing tooling refurb projects for offshore support. Hands on practical experience, lead my team in the shop with overalls on and tools in hand with high level of competence and experience, building and testing product. Lead the base on various continuous improvement activities, touching all area of the business, increasing margins, quality, revenue and cost control. Highly disciplined, high energy, ex military, degree educated.

Manager, Supervisor / Technician, Inspector

1. I am an energy transition strategist and project leader at the forefront of Southeast Asia’s decarbonization journey. With over five years of experience spanning investment analysis, engineering, and strategic development, he brings a rare combination of technical depth and financial acumen to complex energy infrastructure projects. 2. Currently leading the development of Malaysia’s first Sustainable Aviation Fuel (SAF) plant, I plays a central role in shaping the project from early-stage planning through to execution. Usually my works span across government bodies, global technology licensors, and private investors, translating strategic ambition into actionable project milestones. His work involves not only overseeing technical and commercial workflows, but also structuring contractual frameworks and driving high-stakes negotiations. 3. Prior to this, I also built a strong foundation at Technip Energies, where he contributed to M&A transactions, investment strategies, and project financial modelling. I have been directly involved in acquisitions, venture investments, and carbon management initiatives, consistently delivering insights that influence senior management decisions. My earlier experience with TotalEnergies further strengthened his expertise in carbon pricing and competitive strategy within global energy markets. 4. Educated in France with dual master’s degrees in energy management and petroleum economics, I combines a global perspective with regional execution capability. Fluent in multiple languages, he is particularly effective in bridging European investment frameworks with Southeast Asian market dynamics. 5. Driven by a long-term vision for sustainable energy systems, I am also committed to advancing commercially viable decarbonization solutions and positioning the region as a leader in the energy transition.

Engineer, Manager

I am Rely Mulja Setiawan, with bachelor’s degree in civil Engineer, self-motivated, willing to work in team, prefer to meet a challenge. I have been working for 15 years more with differences on construction of fabricator industries oil and gas (EPC) Company, working on various positions, Proposal Engineer, Estimator (Quantity Surveyor)/ Cost Estimator, Sales Marketing, Supply Chain management (Procurement Engineer), Project management, Cost Control Engineer and Project Documentation (QC Document Control).

Engineer, Manager, Supervisor / Technician, Other, Superintendent

Hi Hiring Manager, I am writing to express my interest in applying as a Senior Planner. I have been working as project planning & control with more than 12 years of experience in managing large-scale EPC projects (Owner/Client, PMC (Project Management Consultant, Main Contractor) covering detailed engineering, procurement, construction, commissioning & start-up, FEL/FEED (Front End Loading/Front End Engineering Design). Highly adept in project controlling & analyzing, combined with advanced project management skills to optimize the work productivity and achieve the project goals successfully. My Major Accomplishment : * Managed complex and large-scale (over #3 Billion Project Value) oil & gas, power plant, petrochemical, mining project, optimize the implementation of project management processes by utilizing enhanced project management tools effectively, ensuring project objectives were attainable in a timely manner and within the budget. * Improved the integration system between project schedule and other systems (e.g. cost, finance, engineering, construction) by establishing integrated WBS concept, maximizing the effectiveness of planning and controlling. * Increased work progress/productivity by establishing enhanced tools using Excel Query and Online Database. I have experiences as a  Project Control Lead, Lead Planning Engineer, Senior Scheduler Engineer, Senior Project Planning & Control, Project Control Assistant Manager, and Technical Engineer (Project Control) at Owner, Consultant, EPC, Power Plant, Oil & Gas, Petrochemical, Mining fields. Now, I'm working for Worley Sea Indonesia as Project Control Lead. For more detailed information, you can see the attachment on the link below. Linkedin Profile: https://www.linkedin.com/in/mufadda-pmp%C2%AE-0987b3146/ [https://www.linkedin.com/in/mufadda-pmp%C2%AE-0987b3146/] Availability: 1 Month Notice  Current Live Location: Jakarta, Indonesia Thank You & Regards, Mufadda

Manager, Other, Superintendent

I have 8 yrs of experience in onshore and offshore field.handling fabrication and yard erection activities.

Engineer

I am Senior Planning Engineer with advance skills on Primavera P6. Have abundance of experience in full time as well as part time jobs specially in construction sector. I am PMP, PMI-SP certified and also specialist in delay claims

Engineer

Primavera P6 Planning Engineer with experience delivering detailed project schedules, WBS structures, and critical path analysis across hydropower and infrastructure EPC projects. Proven in coordinating fabrication, procurement, and installation phases across multi-subcontractor environments. Passionate about expanding into offshore oil & gas planning and bringing structured, logic-driven scheduling to every project.

Engineer

Originally from Rio de Janeiro with Italian nationality, over the last 20 years I grew through increasingly complex roles in Oil and Gas ecosystem. I have a demonstrable track record leading complex Tier-1 projects with different commercial models’ type of contract FEED, EPC, EPCM and EPCI, most likely Drilling, Subsea, Topside Construction, FPSO, Decommissioning and Vessel Operations take end-to-end ownership of operations drive seamless integration and execution. Those years taught me the strategic direction, commercial performance, and operational oversight of the regional business unit. The remit spans asset performance, investment strategy, project delivery, and sustainable growth across the offshore oil & gas value chain.

Highly accomplished Cost Engineer with over 14 years of comprehensive experience in Cost Estimation and Cost Control within the Engineering, Procurement, and Construction (EPC) industry. Throughout my career, I have successfully supported and led the cost engineering function across a broad spectrum of projects and proposals spanning Oil and Gas, Pipelines, Food Industry, Petrochemicals, Railway Systems, Power Plants, Mining Infrastructure, and Green Energy sectors. Notably, I have managed cost estimation activities as Cost Estimate Manager for FEED (Front-End Engineering Design) of Bio Refinery projects to develop Total Installed Cost (TIC) estimates and applied Monte-Carlo simulation techniques to determine and optimize contingency allocations.

Superintendent, Engineer, Manager

Mechanical Engineer with experience in industrial systems, energy optimisation, and asset care strategy within plant environments. Experience includes steam systems, boilers, rotating equipment, and plant utilities, with focus on improving reliability, reducing downtime, and optimising operating cost. Skilled in maintenance strategy development, asset criticality analysis, lifecycle planning, and capex evaluation. Has delivered work involving energy optimisation, failure analysis, and long-term asset planning, including scenario modelling and ROI-based decision support. Able to support engineering studies, optimisation work, and technical analysis across industrial and energy systems.

Engineer, Inspector, Drafter / Designer, Manager, Other