Public Job Postings

1.     Subsea well head operation involves well opening, well closing and monitoring DHPT as pert he requirements and logging data for well performance studies.

2.     Make Regular Checks of well heads, Separator, Instrument Air Kit and all measuring units to ensure that they are functioning properly as per the standard operating procedures.

3.     Report all instrument and equipment defects and leaks immediately to my senior engineer and take necessary action.

4.     To take reading from the Separator, well head, Gas injection online, Mainline and water injection line.

5.     In well testing each and every hour a variety of readings such as oil and gas flowtemperatureandpressureandrecordunusualoccurrencethenreportingat my senior engineer.

6.     Start, check and stop diesel generators and pumps according to the instructions. Open or close the water injection distribution and gas lift manifolds on the satellite which process platform to the well head platform.

7.     Assist in isolating – draining, Purging and handing over equipments for maintenance on inspection and check the equipment for correct operating when the maintenance job is completed.

8.     Make the routine weekly run test of equipments like emergency diesel generator, diesel and electrical fire pumps. With the guidance of senior,

9.     Launching pigs into pipeline sand receiving pigs from pipeline and check it for damages. Unfold chemicals into tanks for injection start and adjust the flow rate of chemical injection pumps as required. Collect oil, gas and water samples.

Job Title: Nuclear Materials Inspection Specialist

Project Type: Inspection and Quality Assurance for UF6 Cylinder and PSP Shipments

Job Purpose:

To conduct thorough pre-shipment and loading inspections of UF6 cylinders and PSPs, ensuring compliance with nuclear safety standards and adherence to specified inspection criteria. The role requires expertise in handling radioactive materials and performing inspections according to detailed protocols, including radiation dose rate measurements and contamination checks.

Key Responsibilities:

1. Pre-shipment Inspection of UF6 Cylinders and PSPs:

• Perform visual and subcriticality inspections of cylinders and PSPs (Protective Shipping Packages).
• Conduct lifting and external surface contamination inspections.
• Complete sealing inspections for both cylinders and PSPs.
• Measure radiation dose rates and verify compliance with Form OPT-2005-01 Rev.1 and subsequent revisions.

1. Post-packing Inspections:

• Inspect after tightening fastening devices using specific inspection forms.
• Conduct checks for external surface contamination, sealing integrity, and radiation dose rates.
• Complete visual and sealing inspections on packed cylinders and PSPs.

1. Record Verification and Data Inspection:

• Verify weights and contents (UF6 data) based on Form OPT-2005-02 Rev.1.
• Perform cylinder leak tests and record all inspection results.
• Complete sealing and dose rate inspections, ensuring all records are in compliance with procedural requirements.

1. Loading Inspections:

• Oversee the marking and labeling inspection process on vehicles or containers before/after loading as per Form OPT-2005-03 Rev.1.
• Conduct visual inspections of the PSPs on trailers, railways, and flat-rack containers.

1. Radiation Dose Rate and Surface Contamination Inspection on Flat-rack Containers:

• Perform radiation dose rate and surface contamination inspections on flat-rack containers as specified.
• Ensure compliance with radiation safety limits and submit findings to Sojitz Machinery Corporation for analysis.

1. Documentation and Reporting:

• Accurately document inspection findings using required forms.
• Complete and submit the filling list of measuring instruments.
• Affix security stickers on P10 tubes and report seal numbers accordingly.

Experience Requirements:

• Minimum 5 years of experience in nuclear material handling or a related field, with a strong background in radiation safety and inspection protocols.
• Prior experience with UF6 or similar radioactive materials is essential.
• Knowledge of inspection criteria defined in nuclear industry documents (such as TPD-12-006-R05) and Mitsubishi Nuclear Fuel Co. standards.

Required Skills and Qualifications:

• Certification in radiation safety or nuclear materials inspection.
• Familiarity with Forms OPT-2005-01 to OPT-2005-04 and relevant inspection instructions.
• Strong attention to detail and ability to perform precise inspections.
• Proficiency in documenting inspection findings and adherence to safety protocols.

Project :  – Angola Northern Gas Complex (NGC) Project

Job Summary

The Project Engineer will be responsible for the effective planning, coordination, and execution of project tasks, ensuring that all activities align with contract requirements and project timelines. This position involves liaising with stakeholders, managing project deliverables, and ensuring compliance with quality and safety standards.

Key Responsibilities

• Develop and maintain the Project Execution Plan for tender submissions.
• Conduct weekly and daily meetings with project stakeholders and clients to ensure project alignment and contract adherence.
• Consolidate and prepare presentations for progress meetings and generate Minutes of Meeting for documentation.
• Oversee daily toolbox meetings focused on progress, quality, and safety issues.
• Issue Purchase/Service Requisitions to fulfill project requirements and ensure specifications are met.
• Prepare project progress claims for client approvals.
• Lead monthly HSE safety campaigns to promote safety awareness across stakeholders.
• Review and analyze weekly reports with project planners to track progress.
• Prepare and expedite documents and procedures for client approval.
• Develop the Method of Statement and Job Hazard Analysis as required.
• Ensure compliance with inspection standards by preparing necessary checklists.
• Manage project quality standards in alignment with specifications and Project Specific Procedures (PSP).
• Facilitate project close-out processes, including contract closure and issuance of the Notice of Final Acceptance (NFA).

Qualifications and Skills

• Bachelor’s degree in Engineering or related field from a recognized institution.
• Minimum 5 years of experience in engineering, preferably within the oil & gas fabrication sector.
• Proficiency in MS Office (Excel, Word, PowerPoint).
• Strong communication skills in both written and spoken Malay and English.
• Excellent interpersonal and analytical skills.
• Ability to work collaboratively with diverse stakeholders and manage multiple priorities.
• Willingness to travel as project demands.

Additional Requirements

• Proven experience in project execution and documentation management.
• Familiarity with project safety and compliance standards.
• Hands-on experience in monitoring and managing project quality and timelines.
• Travel: Willingness and ability to travel frequently to Angola during critical phases of the project.
• Reporting Line: Reports to the Package Manager.

Position Overview: We are seeking a qualified AOC QM 26 inspector for a resident role at Sulzer Saudi Pump Company Limited in Riyadh, Saudi Arabia. This role requires immediate mobilization, ideally starting in October 2024, with an anticipated residency extending through mid to end of November 2024. The candidate will investigate, assess, and ensure adherence to quality standards for pump manufacturing processes at the site, providing on-the-ground quality assurance and inspection.

Location: Sulzer Saudi Pump Company Limited

Street #49, 2nd Industrial City, P.O. Box 355994

Riyadh 11383, Saudi Arabia

Responsibilities:

• Perform comprehensive quality inspections according to AOC QM 26 standards.
• Monitor and assess production processes, ensuring they meet quality and regulatory requirements.
• Investigate any deviations in production or quality standards, and provide detailed reports.
• Coordinate closely with the local team to facilitate smooth communication and uphold quality controls.
• Support the implementation of corrective and preventive actions as needed to maintain compliance.

Qualifications:

• Certified AOC QM 26 inspector with relevant experience in pump manufacturing or similar industries.
• Strong background in quality inspection, preferably with experience in the Middle East or on-site inspections.
• Ability to mobilize quickly and commit to residency in Saudi Arabia for the duration of the project.
• Excellent communication and organizational skills.

Application Details: Due to the urgent nature of this assignment, candidates must be able to mobilize on short notice and meet residency requirements. Interested candidates should apply with their current certifications and availability information.

Job Summary:

As a Senior Structural Engineer specializing in offshore projects within the dynamic landscape of the oil and gas industry, you will take a leadership role in driving the structural design and analysis processes. This one-year contract position in Kuala Lumpur, Malaysia, offers a challenging opportunity for an experienced professional with a minimum of 10 years in the industry to make an immediate impact. The contract is renewable based on performance, reflecting our commitment to fostering long-term partnerships with top-tier talent.

Job Responsibilities:

• Lead the conceptualization, design, and analysis of complex offshore structural systems, ensuring they meet industry standards, codes, and client specifications.
• Provide expert guidance to the project team, including junior engineers and designers, throughout the project lifecycle.
• Conduct comprehensive structural assessments and risk analyses to identify potential challenges and propose effective solutions.
• Collaborate closely with cross-functional teams, including geotechnical engineers, architects, and project managers, to integrate structural requirements seamlessly into overall project plans.
• Oversee and review detailed engineering drawings, ensuring accuracy and compliance with design criteria.
• Actively participate in client meetings, presenting technical information, addressing queries, and ensuring client satisfaction with structural solutions.
• Utilize advanced structural analysis software and tools to optimize designs and improve project efficiency.
• Manage and mentor junior engineers, fostering their professional growth and development.
• Conduct periodic site visits to ensure that structural designs are implemented as per specifications and safety standards.
• Stay abreast of industry trends, technological advancements, and regulatory changes to continually enhance design methodologies.

Job Requirements:

• Bachelor's or Master's degree in Civil or Structural Engineering.
• Minimum of 10 years of progressive experience in structural engineering within the oil and gas sector.
• Proven expertise in the design and analysis of offshore structures, platforms, and support systems.
• In-depth knowledge of international design codes, standards, and industry best practices.
• Proficiency in advanced structural analysis software such as STAAD.Pro, SAP2000, or equivalent.
• Professional Engineer (PE) license is highly desirable.
• Strong leadership and mentoring skills with experience in leading project teams.
• Excellent communication skills to effectively interact with internal teams, clients, and stakeholders.
• Demonstrated ability to manage multiple projects concurrently and meet tight deadlines.
• Familiarity with local regulations and permitting processes in Malaysia is advantageous.
• Willingness to travel to project sites as required.
• Commitment to maintaining a high standard of safety in all aspects of structural design and construction.

OVERVIEW OF ROLE

The Operation Supervisor is responsible for supporting the Project Operation Team across various execution sites involved in project activities. This includes overseeing the preparation of equipment and materials for offshore deployment in alignment with project requirements and procedures. Key responsibilities include equipment checks, rigging preparation, structure dressing prior to loadouts, assistance with Site Integration Tests, and general coordination with local subcontractors and the Fabrication Yard/Logistic Base. The Operation Supervisor may also be called upon to support other tasks as directed by different project departments to ensure smooth and de-risked project execution.

HSEQ RESPONSIBILITIES

All personnel are expected to actively contribute to creating a positive HSEQ (Health, Safety, Environment & Quality) culture, adhering to local HSEQ codes and practices. Responsibilities include but are not limited to:

• Reporting all undesired events and safety observations.
• Reporting non-conformances and unsafe conditions using the appropriate systems.
• Leading by example and participating in the intervention program to address safety concerns.

ETHICS & INTEGRITY

Personnel are expected to contribute to a culture of ethics and integrity, adhering to the company’s Code of Conduct.

SPECIFIC KEY RESPONSIBILITIES & ACTIVITIES

• Assist the Operation Manager and Engineers as directed.
• Ensure the proper preparation of project equipment for loadout and offshore deployment, following project documents, procedures, and specifications.
• Perform equipment safety checks and report any defects or potential issues immediately.
• Progress the work scope according to Task Plans and Approved Procedures.
• Assist with maintenance and repair of equipment as required.
• Participate in project risk assessments and take proactive measures to manage risks.
• Maintain all rigging and ensure all equipment certifications are up to date.
• Assist in launching and recovering trenchers, PLETs, and other project equipment.
• Oversee deck safety and manage personnel involved in deck operations.
• Delegate rigging tasks and ensure readiness of equipment for loadouts.
• Support the Logistic and Material Control departments in identifying and preparing equipment for shipping.

AUTHORITY/DIMENSIONS

• Operate within the company’s Code of Conduct.
• Follow company standards and procedures for the Operation Function.

KEY RELATIONSHIPS/STAKEHOLDERS

External

• Subcontractors
• Third-party worksite teams

Internal

• Project Operation Team
• Project Installation Teams
• Logistic & Material Control Teams

PERSON SPECIFICATION

• College-level or professional qualification in disciplines such as Rope Access, Diving, Rigging & Lifting, Fabrication, or STCW.
• Fluent in English, with substantial experience working in Africa.
• Strong familiarity with modern communication tools.
• Experience in Oil & Gas Offshore works.
• Valid Rope Access Level 3 and Coxswain certification.
• Valid offshore medical certificate and survival course, suitable for the geographical area of work.
• Completion of PASS school induction and other company familiarization prior to mobilization.

Job Title: Hull Living Quarter Field Engineer

Location: CMHI Yard, Nantong, China

Mobilization Date: 01/02/2025

Company: EPC Contractor

Project: Kaminho Project – Hull Conversion Activities

Job Purpose:

An EPC Contractor is seeking a Hull Living Quarter Field Engineer to join the team for the hull conversion activities at the CMHI yard in Nantong. The role focuses on overseeing the construction and installation of the living quarter systems, ensuring compliance with design specifications, addressing on-site issues, responding to technical queries (TQ), and working closely with Saipem France for complex technical matters.

Key Responsibilities:

• Oversee all construction activities related to the living quarters on the hull conversion project.

• Resolve on-site issues pertaining to the living quarters and respond to TQs.

• Interface with the design team in France for significant technical issues.

• Ensure all construction works meet the project’s design specifications and standards.

• Provide leadership and guidance to the team responsible for the living quarters.

• Participate in a familiarization phase in France prior to the start of work in China to gain understanding of the project design.

Requirements:

• Experience: Senior engineer with proven experience in designing and constructing living quarters in offshore or marine projects.

• Skills: Strong field problem-solving abilities, leadership experience, and effective communication skills.

• Familiarization Period: Candidates must be available for a familiarization phase in France for several weeks before starting the project in China.

Terms and Conditions:

• Status: Single status.

• Annual Leave: 51 working days per year.

• Working Days: 6 days per week.

• Accommodation: Provided in kind.

• Transportation (Accommodation – Yard – Accommodation): Managed by the company.

• Ticketing: 6 round-trip tickets per year.

• Living Allowance: Included in the package.

• Insurance: Yes, provided.

Job Title: Hull Electrical Field Lead Engineer

Location: CMHI Yard, Nantong, China

Mobilization Date: 01/02/2025

Company: EPC Contractor

Project: Kaminho Project – Hull Conversion Activities

Job Purpose:

An EPC Contractor is looking for a Hull Electrical Field Lead Engineer to join the team in Nantong for the hull conversion activities at the CMHI yard. This role involves interfacing with the yard, engineering, and construction teams to address electrical system-related construction issues, respond to technical queries (TQ), and collaborate with the design team in France for resolving complex electrical issues that cannot be handled locally.

Key Responsibilities:

• Lead all electrical engineering activities related to the hull conversion at the CMHI yard.

• Address electrical system construction issues and respond to TQs.

• Collaborate with the design and engineering teams in France to resolve critical electrical issues.

• Ensure all electrical installations are completed according to project specifications, standards, and safety requirements.

• Provide technical leadership to the on-site electrical engineering team.

• Engage in a familiarization period in France with the design and project team before mobilization to China.

Requirements:

• Experience: Senior engineer with extensive experience in electrical systems for hull construction and conversion projects.

• Skills: Strong technical problem-solving skills, leadership abilities, and experience working autonomously in a field environment.

• Familiarization Period: Candidates must be available for several weeks in France to get acquainted with project designs and the team before starting work in China.

Terms and Conditions:

• Status: Single status.

• Annual Leave: 51 working days per year.

• Working Days: 6 days per week.

• Accommodation: Provided in kind.

• Transportation (Accommodation – Yard – Accommodation): Managed by the company.

• Ticketing: 6 round-trip tickets per year.

• Living Allowance: Included in the package.

• Insurance: Yes, provided.

Job Title: Hull Piping Field Lead Engineer

Location: CMHI Yard, Nantong, China

Mobilization Date: 01/02/2025

Project: Kaminho Project – Hull Conversion Activities

Job Purpose:

An EPC Contractor is seeking a Hull Piping Field Lead Engineer to join the field team in Nantong for the hull conversion activities at the CMHI yard. The role involves interfacing with the yard, engineering, and construction teams to address piping-related construction issues, respond to technical queries (TQ), and collaborate with the design team in France for complex technical issues that cannot be resolved on-site.

Key Responsibilities:

• Supervise and lead all piping engineering activities for the hull conversion at the CMHI yard.

• Resolve piping-related construction issues and respond to TQs.

• Liaise with the design and engineering teams in France on significant technical issues.

• Ensure all piping works are executed in line with project specifications and quality standards.

• Provide technical direction and leadership to the on-site piping team.

• Participate in a familiarization phase in France to understand project designs before the start of work in China.

Requirements:

• Experience: Senior engineer with extensive experience in hull piping systems, conversion projects, and field engineering.

• Skills: Strong problem-solving and decision-making abilities, with experience in leading piping teams.

• Familiarization Period: Candidates must be available to spend several weeks in France prior to commencing work in China to get acquainted with the design and the project team.

Terms and Conditions:

• Status: Single status.

• Annual Leave: 51 working days per year.

• Working Days: 6 days per week.

• Accommodation: Provided in kind.

• Transportation (Accommodation – Yard – Accommodation): Managed by the company.

• Ticketing: 6 round-trip tickets per year.

• Living Allowance: Included in the package.

• Insurance: Yes, provided.

Work Mode:

• On-site, full-time role in Nantong, China, with a familiarization phase in France before mobilization.

Job Title: Hull Structural Field Lead Engineer

Location: CMHI Yard, Nantong, China

Mobilization Date: 01/02/2025

2 years contract

Project: Kaminho Project – Hull Conversion Activities

Job Purpose:

EPC Contractor is seeking a Hull Structural Field Lead Engineer to join their field team in Nantong for the hull conversion activities at the CMHI yard. The role will serve as a critical interface between the yard, engineering, and construction teams to address structural construction issues, respond to technical queries (TQ), and liaise with Contractor in France for complex technical challenges that cannot be resolved locally.

Key Responsibilities:

• Oversee structural engineering activities related to the hull conversion at the CMHI yard.

• Interface with the yard, engineering, and construction teams to resolve on-site construction issues.

• Manage and respond to TQs in coordination with Saipem France, escalating significant technical concerns.

• Ensure all work complies with project specifications and engineering standards.

• Provide technical leadership and guidance to on-site teams.

• Participate in a familiarization phase with the design team in France prior to the start of the project.

Requirements:

• Experience: Senior engineer with extensive experience in hull structure design, conversion, and field engineering activities.

• Skills: Strong problem-solving abilities, effective communication skills, and autonomous decision-making.

• Familiarization Period: Candidates must be available to spend some weeks in France before commencing work in China to get acquainted with the design and the team.

Terms and Conditions:

• Status: Single status.

• Annual Leave: 51 working days per year.

• Working Days: 6 days per week.

• Accommodation: Provided in kind.

• Transportation (Accommodation – Yard – Accommodation): Managed by the company.

• Ticketing: 6 round-trip tickets per year.

• Living Allowance: Included in the package.

• Insurance: Yes

Work Mode:

• On-site, full-time role in Nantong, China, with a preliminary familiarization phase in France.