Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

More than 15 years experience of working years in Engineering Design in Oil and Gas Industry as an Instrument Engineer for both Brownfield and Greenfield projects. Involved in various engineering stage; Conceptual, FEED and basic engineering design, detail engineering design and EPCC work for Upstream and Downstream facilities. Familiar with the preparation of the instrumentation design drawings and documents, Instrument Loop Diagram, Instrument Location Plans, Instruments Installation and Hook-ups Details, Cable Block Diagrams, Instrument Schedules, Instrument Datasheets and Material Take-off. Experiences in onshore and offshore design of Instrument works and site visit for work scoping. Experience working with various multinational counterparts throughout projects as client PMT as well as consultant.

Engineer

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc… 

Manager, Superintendent

6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.

Engineer

Mechanical engineer experienced in maintenance, inspection, training and designing fields of fluid power systems, lifting, static and rotating equipment. Passionate in 3D designing, additive manufacturing, rapid prototyping, and simulation analysis. Attained the NCEES FE mechanical exam pass and eager to obtain the professional licensure.

Engineer, Drafter / Designer

Boasting a solid 6-year track record as an Electrical Engineer, developing expertise in a variety of project fields such as Power Plants, Oil and Gas, Petrochemicals, and Small Buildings. Proficiency extends across all project development phases, from tender/proposal stages, feasibility studies (FS), Front-End Engineering Design (FEED), Detailed Engineering Design (DED), to engineering in the EPC phase. A substantial number of technical documents have been successfully produced and delivered, supporting a diverse range of company projects. These encompass comprehensive electrical calculation reports, system studies using ETAP, simulations via DIALux software, design basis, specifications, data sheets and single line diagram. My clientele spans from state-owned companies (PERTAMINA and PLN) to private enterprises (Wilmar Indonesia and E&E Gas Shd Bhd). Also has expertise as Upstream Oil & Gas Company Project Development Engineer regarding to Final Investment Decision (FID), Plan of Development (POD), Project Summary (PS), Authorization of Expenditure (AFE), Budget Scheduling (BS), Work Program and Budgeting (WP&B), Placed into Service (PIS). Reliability and dexterity have been key in contributing to engineering service companies and upstream oil and gas companies. Committed to delivering top-tier engineering solutions that drive project success and foster organizational growth.

Engineer, Drafter / Designer

Senior Instrument and Control Engineer with a Bachelor of Engineering Science (Nuclear Engineering) from the University of Gadjah Mada, Indonesia. Holds a Professional License as a Member of The Institutions Engineer of Indonesia, PE Control Systems (US Standard), and Certified Practicing Engineer Level II (Process). Experienced in interface roles between engineering, construction, and pre-commissioning/commissioning, participating in FAT and VFAT, providing technical expertise, and coordinating with various teams for operational excellence.

Engineer

More than 12 years’ experience in Oil & Gas, Manufacturing Heavy Equipment, and Power Plant fabrication. Qualified Welding Inspector CSWIP 3.2, CSWIP 3.1 and CSWIP 3.0 certified by TWI Certification. ASNT Level II NDT Inspection is certified by the Offshore Technology Institute (OTI). Qualified Painting inspector certified by Lapis Baja Inspektindo. Qualified for Installation and Assembling of Small GRP Pipe and Fitting certified by ORI Group. Demonstrates strong attention to detail in inspection weld quality. Comes with a Bachelor of Mechanical Engineering degree. Having experience to develop QC procedure base on Client Specification, Project Specification, Code and Standard applicable (AWS, ASME, MOTS, API, ISO, DNV). Undertaken Projects covering a wide range of Oil & Gas structures, Pipe Rack foundations, Substation module, Well Head and Riser Platforms, Accommodation Platform, Process Platform, FPSO modules, and Power Plant.

Inspector, Supervisor / Technician, Other

HSSE Manager | HSE Engineer | HSE Specialist | HSE Training Coordinator Bach, Degree in Industrial Engineering. An HSE visionary & leader, having 20+ years of rich experience in providing management, leadership and technical oversight for Health, Safety, and Environmental initiatives for multi-million USD Construction/Projects, Plant Operations/Facilities Operation, Security, Production Facilities and Power Plants. Enabling organizations to become their best through HSE process optimization and improvement. Drove project safety excellence as well as optimization and execution methodologies.

Manager, Superintendent, Engineer

I am an experienced motivated professional with an extensive career covering different positions such as Logistics & Materials Specialist, Expeditor & procurement. •Negotiate contracts with suppliers and customers. •Control delivery processes. •Plan and implement logistical strategy, ensuring targets are met. •Oversee product storage, handling and distribution. •Use computer software to track goods from origin to delivery. •Work on forecasts and inventories, keeping an accurate record of the process and analyzing performance. •Manage the costs involved while maintaining quality. •Manage and motivate my teamwork. •Improve the overall Logistics performance and look for any possible innovations to the process. •Develop new and existing relationships with suppliers. •Manage and minimize the risks (for example operational or reputational) that could affect or interrupt the operations. •Consider the environmental impact of the Logistics department in order to meet sustainability targets. •Follow up transit materials, custom documentations, Supply boats and aircrafts. •Keep updated inventory, properly organize storage in warehouse & yards. •Issue Purchase Orders to request material movements, validate invoices. •Ensure validity of all certificates required for lifting gear. •Ensure the maintenance of files and records relevant to above activities. •Issue feedback reports on the activities performed as required. •Good computer skills, trained in various safety programs such as Safety Focus, Stop Program, Job Safety Analysis, Job Risk Analysis & Safety Audits. •Ability to function under stressful conditions / unfavorable weather conditions. •Worked with AMOS, People Soft, Maximo, Wellit & SAP. •Good reasoning and problem solving skills. •Strong communication skills. •Possess strong organization and problem solving skills as well as the ability to work independently or been part of a team with changing priorities. Strong initiative and be service oriented with high volume of activities. • Payrolls. • Crew changes. • Manage data in spreadsheets and reports. • Carry out clerical duties, answering phones and preparing documents. •Work with procurement departments to source the right products. •Negotiate contracts with suppliers and customers. •Work with procurement department to source the right products.

Other

Graduate in bachelor of Mechanical Engineering from Andalas University with an interest in metallurgy and material. A fast learner person, highly motivated and great passion in EPCI industry. I have prior experience of 6 years as a piping engineer at Mcdermott Indonesia with a demonstrated history of working as detailed engineer, pre-commisioning, piping completion, reinstatement, create piping erection workpack by ASSET 55, and as FAT (Factory Acceptance Test) Engineer for subsea pipeline project of BP Tortue Phase 1A. Skilled with AutoCAD, Naviswork, Piping Process, Pipeline, Subsea Testing Methods, Pipe Stress Analysis. Registered as Professional engineers by PII (Indonesian Institution of Engineers).

Engineer

I am a passionate instrument engineer with ten strong years of experiences specializing in Instrumentation & Controls, Fire & Gas and Telecommunication systems spans from oil & gas to construction industries. I offer a unique combination of technical expertise, strong interpersonal skills, and unwavering commitment to excellence. I am confident in my ability to contribute effectively to any project in the instrument engineering field

Engineer

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

Bachelor's degree in Mechatronics Engineering with 15 years of extensive experience in project management across various organizational levels and portfolios. Expertise includes sub-contractor management, client interactions, and adaptability to diverse working environments. Proficient in navigating management setups, contract execution strategies, and project-specific requirements. Well-versed in government and local regulations, client-specific standards, and international best practices (DEP, ASME, API), as well as design and operational codes/standards. Demonstrated ability to effectively oversee and managing project budgets and funds, with a strong foundation in contract management and procurement.

Manager

I am an Instrument and Control Engineer with around 7 years experiences in various oil and gas projects in upstream and downstream sectors both onshore and offshore. I have been experienced in all project phases start from basic conceptual engineering study (Pre-FEED), Front End Engineering Design (FEED), Detail Engineering Design (DED), construction, pre-commissioning, commissioning up to start up. Currently, I worked in PT. Pertamina Hulu Energi Offshore South East Sumatera (PHE OSES) as Instrument and Control Engineer for Operation & Surface Facility division. My main role is to prepare instrumentation and control deliverables for in-house engineering design. And give technical review for engineering documents and drawings done by consultant, contractor or vendors during FEED/EPCI phase for Wellhead and CPP Platform both brownfield and greenfield projects.

Engineer

Safety, Health & Environmental professional with successful experience in Occupational Safety, Process Safety, Environment, Sustainability and Risk Management. Recognized consistently for performance excellence and contributions in implementing ISO 9001, ISO 14001, ISO 45001 and SMK3 in Oil & Gas, Renewable Energy and EPC industry. Strengths in Risk Management, Accident Investigation, CSMS, HAZOP, Bowtie and Training Development backed by many trainings .

Engineer, Manager, Superintendent

Result-oriented, dynamic, and performance-driven geoscientist with MSc and PhD degrees in Petroleum Geoscience. 17 years track records in petroleum exploration Industry and research resulting with over 15 publications. Demonstrated success in multidisciplinary team leadership, technical report writing, multitasking, solving complex problems.

More than 12 years experience in Oil and Gas Industry. Involved mainly in Heating, Ventilation Air Conditioning (HVAC) System and Mechanical Package. Exposed and involved in Conceptual, FEED and Detailed Design phase for offshore and onshore facilities. Familiar with international engineering standards such as ASHRAE, SMACNA, ISO and operation company standard like PETRONAS Technical Standard (PTS) and SHELL Design and Engineering Practice (DEP). Looking forward for more involvement in Design HVAC System, Mechanical Package and Project Management.

Engineer

Having almost 11 years work experience as Piping Engineer effective hands-on Offshore and Onshore Oil & Gas Facilities with a background Bachelor of Mechanical Engineering. Has strong capability in Design Engineering, Procurement & Construction works in the Proposal stage & Detailed engineering both green field and brown field / modification.

Engineer

Seasoned oil and gas professional with over 17 years of hands-on experience, with a strong foundation in production enhancement and a solid track record in hydraulic workover operations. Skilled in operating and maintaining HWU systems, including well intervention, troubleshooting, and equipment handling. Known for being reliable, safety-conscious, and composed under pressure, with excellent teamwork and problem-solving abilities. Adept at adapting to dynamic field environments and contributing to efficient, high-performance operations. Committed to continuous growth and operational excellence in every role.

Supervisor / Technician

As a committed Process Safety Engineer with a proven track record in the Oil & Gas sector, I am eager to contribute innovative safety solutions within challenging environments. My trilingual fluency in English, French, and Arabic, coupled with experience at a multinational company, positions me to collaborate effectively with diverse teams. Proficient in industry-specific software such as PHAST, PipeNet, and Detect 3D, I am ready to deliver exceptional safety performance and advance the strategic objectives of your organization.

Diploma in Quality Engineering Technology, with over 6 years of experience in quality control and welding inspection, I have worked across various companies like Hamdan Abdullah Sdn Bhd (HASB), Faiz Engineering Services Sdn Bhd (FESSB), and Seremban Engineering Berhad (SEB), providing expertise in welding and fabrication inspections. I specialize in ensuring compliance with industry standards and client specifications, managing critical inspections for pressure vessels, structural frames, and piping. My experience includes material handling, safety and compliance management, calibration, flange integrity, and non-destructive testing (NDT) techniques like UT and MPI. As a Freelance Offshore QC Welding Inspector, I lead inspection teams, provide training, and ensure accurate documentation, maintaining high-quality standards throughout the project lifecycle. I also oversee coatings and surface treatments, ensuring compliance with safety and quality regulations.

Inspector

    I am a young, energetic, well-motivated professional. I have excellent Technical skill and believe in participatory learning process and approach. I can maintain the technical matters relating to Mechanical, Civil, hydraulic and Industrial mechanics. I have done my work with Saudi Aramco & Dar Petroleum. I am having ability to function in a multicultural environment, to lead and motivate multinational teams and familiarity with cost management processes.  Assuring of my best services at all 

Inspector, Engineer, Supervisor / Technician