I have extensive experience in technical support and expertise in Tubular Running Services (TRS) and Drilling with Casing (DwC), Structural Dynamic Monitoring for Production Platform, Transportation and Installation (T&I), mooring buoy maintenance, vessel operations and well testing. I provide critical support for operations and customer issues, manage maintenance strategies to ensure equipment reliability using MyAdvisor, and oversee quality assurance processes. My role includes developing and executing training programs, coordinating and supervising project activities, and leading operational readiness efforts including critical testing and maintenance. I excel in optimizing facility efficiency, managing field and workshop operations, and executing offshore engineering projects. My commitment to safety is demonstrated through rigorous protocol implementation and active participation in HSE activity in workplace ensuring a culture of safety and compliance in all operational contexts. ● Technical Support and Subject Matter Expertise: Provide technical support for operations and customers, acting as a Subject Matter Expert (SME) in Tubular Running Services (TRS) and Drilling with Casing (DwC) and structural dynamic monitoring for production platform. Address technical issues, assist in incident investigations, and interface with personnel, management, and customers on training and tool failures. ● Maintenance Strategy and Equipment Reliability: Develop and implement maintenance strategies toensure equipment reliability. Utilize MyAdvisor (Weatherford’s Computerized Maintenance System) to monitor preventive maintenance and drive continuous improvement in equipment performance and compliance with API requirements. ● Quality Assurance and Compliance: Oversee QAQC checks of equipment for Third Party Inspection (TPI) and ensure adherence to quality standards. Manage corrective and preventive action reports, internal and external audits, and approval of job reports to maintain high-quality standards. ● Training and Competence Management: Monitor and manage the training and competence strategy for field and workshop personnel. Ensure that equipment upgrade bulletins are implemented and followed and participate in the creation and revision of technical work instructions. ● Project Coordination and Supervision: Coordinate and supervise activities of service or technical personnel, including job or project management, administration, and technical support. Manage the planning and execution of projects, ensuring compliance with safety and operational standards. ● Operational Readiness and Technical Testing: Lead operational readiness efforts with meticulous tracking via excel, Microsoft Project and Primavera P6 and technical test e.g Factory acceptance test, fit and function test, and hydrotest. ● Facility Optimization and Maintenance: Lead initiatives to improve facility efficiency and reduce downtime. Coordinate preventive maintenance activities and optimize strategies to save costs and enhance production capacity. ● Field and Workshop Management: Manage the activities of service or technical personnel, ensuring effective performance and adherence to project requirements. Support competency assessments and quality checks in various operational contexts. ● Offshore and Marine Engineering: Lead and execute offshore platform structural dynamic monitoring, offshore transportation and installation, and maintenance services for mooring buoys. Oversee project planning, equipment readiness, and procedural documentation for offshore operations. ● Project Engineering and Execution: Manage and coordinate various engineering projects, including well testing services, flowline export hose procurement, deperming system installations, relocations of FPSO, and structural dynamic monitoring for production platform. Ensure project deliverables meet technical specifications and client requirements. ● Process Improvement and Efficiency: Conduct time studies and streamline material handling and flow procedures to enhance workplace efficiency. Develop equipment layout plans and track inventory data to support key decision-making and increase productivity. ● Safety Leadership: Implement and oversee safety protocols, ensuring safe handling of hazardous materials and adherence to safety standards. Act as service excellence focal person who act as technical reference for safety and quality hence promoting a culture of safety within operational teams. ● Systems Utilization and Technology Skills. Proficient use of Windows and Mac operating systems, well versed with MS Office Suite (Word, Excel, PowerPoint) , Microsoft project , Primavera P6, Inventor, ANSYS, AutoCAD.

Engineer, Supervisor / Technician

Work undertaken that best illustrates capability to handle the tasks assigned   ·       Substantial years of experience in railway engineering starting with the rehabilitation works of KTMB commuter line where existing railway lines were dismantled and re-laid with insertion of geocell and upgraded crusher run and ballast. The rehabilitation was done in a period of two days’ non-stop work per segment and handed over to KTMB for resumption of the Commuter services. This job was undertaken as a Contractor’s representative.   After completion of this project I joined the Rawang-Ipoh Electrified Double Track Project, as a Consultant’s site representative where my job entails site supervision of the construction of the new additional track and upgrading of the existing railway track.   Successful completion of the Light Rail Transit Extension Works (KLJ Line Extension) LRT2 costing MYR 6 billion for the government concessionaire company Prasarana Berhad.   Participated in the LRT3 project implementation up to the tendering stage especially the LRT Depot Works.   ·       Specialization in wastewater engineering, having been involved in three projects concerning construction of sewage treatment plants and sewerage mainlines. Two of the projects were mega project like Pantai Sewerage Treatment Plant costing more than RM 400 million and Kota Kinabalu Sewerage System, Sabah which costs more than RM 183 million. Substantial experience in water retaining reinforced concrete structures; aeration tanks, clarifiers, digesters and etc. ·       More than 10 years’ experiences in structural and building works having worked for a property developer; to build a 224-unit resort development in Genting Highlands and was also responsible for the construction of a 1000/person capacity private college adjacent to the resort under the same management. I successfully completed the project and was reassigned as the Operations Manager to handle the facilities and assets management of the project.   ·       More than 30 years’ experiences in infrastructure works; having involved in earthworks, road & drainage, piling, bridge construction, ground treatment methods and retaining wall structures. ·      Several years’ experience in Integrated Building Systems (IBS); prefabrication construction where I was involved in the Teachers Housing project consisting of 10,000 units built in several states in Malaysia.   ·      Experienced in Industrial Buildings brownfield/greenfield construction works working with international clients like AG Continental Tyres, Dutchlady Milk Industries, Dindings Poultry Plant and MacFood Services (TYSON).

Manager

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Experienced Piping Stress Engineer in analyzing and designing piping systems to ensure structural integrity and compliance with industry standards. Proficient in stress analysis, pipe support design, and leveraging advanced software tool such as CAESAR II. Demonstrated expertise in performing complex calculations, evaluating thermal and mechanical stresses, and providing solutions to mitigate potential issues. Adept at collaborating with multidisciplinary teams to deliver high-quality engineering solutions on schedule and within budget.

Engineer, Drafter / Designer

EPCC OF 800 KW POWER + 1400 KW COOLING CAPACITY COGENERATION FACILITY Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 12 million Duration: May 2022 – Oct 2023 * Led turnkey EPCC execution of an integrated cogeneration system comprising 800 kW Capstone microturbine, 1,400 kW absorption chiller, cooling tower, and auxiliary systems. * Directed end-to-end project lifecycle from concept, detailed engineering, procurement, construction, to commissioning. * Achieved regulatory approvals from BOMBA, DOE, and MDPT with zero re-submissions — first-pass compliance on all technical dossiers and safety submissions. * Delivered mechanical completion and system commissioning 3 weeks ahead of schedule, with zero punch list on client handover. * Integrated SCADA and power management systems across thermal, electrical, and chilled water assets with full load synchronization. SCADA SYSTEM MODIFICATION & OPTIMIZATION – 1MW CAPSTONE MICROTURBINE Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 1.7 million Duration: May 2022 – Oct 2023 * Engineered a full PLC/SCADA revamp for 1MW Capstone C1000S microturbine integrated with solar PV, thermal oil heater, and plant-wide MSBs. * Implemented advanced logic for fault detection, dynamic load balancing, and power prioritization across multi-source energy systems. * Optimized system sequencing for microturbine and auxiliary operations, improving thermal-electrical efficiency by over 15%. * Achieved system commissioning and performance validation within 2 weeks, including HMI development and I/O mapping across redundant PLC networks. PETRONAS RAPID – ALLOY PIPING FABRICATION & INSTALLATION Client: OUIJV Role: Project Manager Value: RM 8 million Duration: Sep 2016 – Jan 2018 * Managed fabrication, logistics, and installation of over 100,000 Dia-inch of high-alloy piping (Inconel, Duplex SS) to ASME B31.3 and client specifications. * Led full QA/QC regime including RT, UT, PMI, and hydrotesting, achieving 100% client acceptance on first inspection. * Coordinated construction interfaces with civil, structural, and mechanical contractors in live plant environments. * Delivered project on schedule with zero NCRs and full compliance with Petronas and DOSH standards. OFFSHORE HOOK-UP & FLOWLINE INSTALLATION – DANA PLATFORM Client: PCPP Operating Company Role: Senior Project Engineer Value: RM 1 million Duration: Jan 2009 – 2012 * Executed offshore hook-up, spool fabrication, and installation works for flowline and topside piping under PETRONAS and PTS specifications. * Maintained 100% LTI-free record throughout offshore campaign. * Successfully secured two follow-up contracts: * D2 Flow Line Replacement * 6” Piper Valve Service Order * Oversaw cross-discipline coordination (piping, structural, E&I) ensuring seamless interface and “first-time-right” installation during shutdown window.

Manager, Engineer

With 20 years of experience in drafting and engineering design, I specialize in P&ID drafting, SolidWorks modeling, AutoCAD customization, and automation solutions to optimize engineering workflows. My experience spans across different industries including O&G, PetroChemical, Mining, food, industrial, and automotive manufacturing, where I’ve delivered high-precision designs, process diagrams, and automation tools to streamline operations. 🔹 What I Offer: ✔ P&ID Drafting & CAD Administration – Expertise in iDrawings, SmartPlant P&ID, AutoCAD, and AVEVA. ✔ SolidWorks 3D Modeling – Design of mechanical parts, assemblies, and industrial fixtures. ✔ AutoCAD & SolidWorks Automation – Custom scripts, LISP routines, and macros for efficiency. ✔ Excel & Database Integration – Automating reports, data processing, and engineering calculations. ✔ Project Management – 4+ years of leading projects, coordinating teams, and delivering quality results. I thrive on efficiency, accuracy, and automation, ensuring every project execution is optimized for quality on-time deliverable. Whether you need detailed P&IDs, 3D models, or custom automation solutions, I can deliver cost-effective, high-quality results tailored to your needs.

Drafter / Designer, Manager, Supervisor / Technician, Other

Graduated from MSc of Subsea Engineering at the University of Aberdeen, and BSc of Engineering Physics from Bandung Institute of Technology. I have a strong engineering background, mainly the principles of engineering mechanics & electrical which consists of numerical simulation method using computational fluid dynamics (CFD) in fluid mechanics projects and instrumentation & control in energy facilities projects. I have been adept at doing analysis related to subsea through hand calculations as well as software calculation. In which i was in charge in doing subsea pipeline analysis (on bottom analysis, free span analysis, stress analysis). I also have operated the simulation with Flexcom & StarCCM+ in regards to riser analysis while also adept at doing CFD analysis for subsea equipment such as erosion phenomena in pipeline gas bends. In cumulative, I have 9 years of working experience in oil & gas industry. At my last job, I was working as an instrument & electrical project construction engineer at Pertamina Exploration & Production Division, an Indonesian O&G company taking on construction projects of oil & gas surface facilities. All in all, I have a solid intention to have a career in energy or technology sectors, related to offshore, marine, or subsea industry.

Engineer, Superintendent

Result-driven Mechanical Rotating Engineer with over 13 years of progressive experience in rotating equipment, project management and maintenance within oil & gas and petrochemical industry. Expertise in overseeing rotating & turbomachinery equipment FAT, installation, pre-commissioning, commissioning, maintenance, overhaul, refurbishment, Plant shutdown and Turnaround ensuring compliance with API, ASME, ISO and Petronas Technical Standard. Proven track record in delivering technical solutions and managing cross-functional teams for clients such as Petronas and TNB Genco.

Engineer

Experienced Instrumentation & Control Engineer with 18+ years of proven experience in the oil and energy industry. Demonstrated expertise across the full project lifecycle, including Feasibility Study, Technology Selection, Pre-FEED, FEED, Detailed Engineering Design (DED), EPC, Commissioning & Start-Up, Operations - Productions Transition, and Facility Maintenance. Well-versed in delivering integrated solutions from concept to handover, ensuring safety, efficiency, and compliance at every stage. Holds a Master’s degree in Instrumentation Engineering from Sepuluh Nopember Institute of Technology (ITS), with a strong background in both engineering execution and cross-functional project management.

Engineer, Superintendent

·    I am a Mechanical Piping Engineer with 26+ years of experience.. I have a diverse engineering background with valuable experience in the oil and gas industry specifically in the upstream engineering phase (specifically Oil and Gas EPCIC Project, Offshore Facilities with 12 years of Piping Engineering, project development, construction and HUC in Operator Organization) in and marine. ·    Experience as Piping Engineering Lead for project development from FEED, Detail Design Engineering, Construction and Offshore Commissioning. ·    Knowledge of producing specifications and datasheet for piping materials, manual Valves and Special Piping items and Equipment datasheet.  ·    Familiar of industry piping design codes, pipe fitting codes, flange codes, valve codes such as ASME B31.3/B16.05/B16.09/B16.10/B16.11/B16.25/B16.47 and API /RP14J/5L/6D/598/602/608/609. ·    Knowledge of interpreting the design process from the process documents such as the PFD,P&ID and to implement it to the detail design of the process system. ·    Experience in preparing piping engineering documents such as Piping Material Specification, Manual Valve Specification, Piping Insulation, Manual Valve Datasheet, Special Piping Material Datasheet and to perform verification of piping wall thickness calculation by design office. ·    Completely familiar with various computer software and applications such as WinPCs, CAESAR II, Naviswork (for 3D Modelling Review) , AutoCAD, Microsoft Office (Words, Excel & PowerPoint) and Microsoft Project. ·    Experience in technical and commercial bid evaluations of the mechanical equipment packages and piping materials.  ·    Capable of giving technical recommendation of piping materials, valves, special piping item and static equipment component. 

Engineer

I am Fairol Hasbullah, a dedicated and skilled Structural and Project Engineer with over 10 years of hands-on experience in metal fabrication, structural steel, and piping construction, particularly within the oil & gas and heavy industrial sectors. My technical foundation is backed by a Diploma in Engineering Technology (Metal Fabrication) and certifications in Tool & Die Mechanical Engineering. Throughout my career, I have contributed to various high-profile EPC and EPCC projects involving pressure vessels, skid structures, subsea pipeline field joint coating, offshore riser clamps, passive fire protection, and large-scale grouting/flooding systems. I bring strong expertise in Autocad 2D/3D design (including isometric, P&ID, and BOM), CNC programming, project costing, fabrication procedures, and lifting/loadout operations. I am highly adaptable, detail-oriented, and well-versed in coordinating with multidisciplinary teams to meet project timelines and client specifications. With a deep understanding of fabrication processes and safety standards, I aim to deliver high-quality, cost-effective engineering solutions on every project.

Engineer

PROFILE

Supervisor / Technician

Construction manager Aramco approved&approval from Saline Water Conversion Corporation SWCC&approval from the Saudi Council of Engineering (Engineering Expert) Dear Sir Kindly be informed that I am ready to transfer my IQAMA immediately. I am currently available in Saudi Arabia, and I have a total of 20 years of experience in the Kingdom of Saudi Arabia . I have approved Aramco. I have approval from Saline Water Conversion Corporation SWCC. I have approval from the Saudi Council of Engineering (Engineering Expert) I have approval from the Saudi Council of Engineering. Transferable Iqama/Applicable immediately. Current Location :Makkhe- saudi arabia Current Company: Binladin grop (Abdal) Current Designation:construction manager A driving license in Saudi Arabia is available. Attached are my contact details and a detailed CV. Thanks and regards Yasser Dyab mr_yassr2006@yahoo.com [mr_yassr2006@yahoo.com] Mob. # 00966504911076 and 00966590249134

Experienced Heavy Equipment Maintenance with a demonstrated history of working in the retail, forestry, mining, construction and power power plant industries. Skilled in preventive & corrective maintenance and have skill on transfered knowladges as mechanical trainer.

Engineer, Inspector, Other, Supervisor / Technician

Capable to advise and finding the best code for Customs Tariff in the Harmonized Commodity Description and Coding System or HS Code. Knowledgeable and have experience in Import License (AP) application to MITI as well as and Tax Exemption application (MOF's /MIDA procedures and Customs requirements). Familiar and have experience in handling of Oil & Gas material such as, line pipes, Structural Steel and Equipment. Love challenging job and do not have a problem to work in long hour or traveling outstation to execute assignment given. Willing to travel.

Manager

Profile Summary: - Master degree in Mechanical Engineering - 26+ years of HSE & Quality experience which include 18+ years of oil & gas career (Operator & Upstream Contractors; Offshore & Onshore / Land) in UAE, Kuwait & Oman, 12+ years in Operations, EPC cum  Training experience and 12 years of Corporate experience in Planning, Programs, Performance, Compliance, Training, Communications & Projects. - Possess successful completion of HSEQ certifications that include but not limited to NEBOSH, IOSH, Lead Auditor for QHSE Management Systems, ModuSpec Rig Inspection, Behaviour Based Safety Level-1 for Coaches, TapRoot & CLC for Incident Investigation Root Cause Analysis, DuPont STOP etc. - Experiences include directly with ADNOC Offshore Abu Dhabi, Kuwait Oil Company, PDO Contractor Oman and Technip Abu Dhabi.  - Possess driving license from UAE, Kuwait, Oman & India. - Readily available for taking up any suitable onshore assignments. Looking forward to hearing from you. Best Regards & Thanks, Sridhar Gopalan +91 93454 93778

Engineer, Manager, Superintendent, Supervisor / Technician, Inspector

My name is Ekni Han Bin Abd Rahman. I am a multi discipline Professional. I have been involved for over 20 years in oil and gas industries consist of  1. Onshore LNG Process facilities , 2. Offshore process & utilities facilities at ( Platform /Island /FPSO/MOPU ) 3. EPC companies. General Key abilities : · Energetic work ethic and detail-oriented. · Motivates Team members. · Able to Supervise , manage & Coordinate works · Able to bring competitive & positive work Environment at work place. · Able to work in multicultural working environment. ·Understand the important of Communications and Team work at difference level / parties. ·To ensure task given in good progress and completed on time. · Proven Experience & expert in Coordination of Construction activities in Brownfield area. · Abilities to Lead and meet Client expectation (Time Frame) of work activities as per Instructions and target. · Specialize in monitoring and contribute information cross department during Construction Project phase , · Keep All Parties from ( Client / EPC / PMT) at the same page toward job completion Production/Operation Key Abilities · Familiar and understand work Instructions, work procedure, Permit to Work system, Fire Fighting System (Fields and Panel) and Housekeeping. · Expert of plant Operations (Panel and Fields ), Normal Operation & Troubleshooting. · A wide ranges of experiences in Pre-commissioning, Commissioning stages, Normal Operations, Start-up and Shutdown) · Provide , Coaching, Mentoring &Training (Field & DCS) for Operation team members . ·  Experience in process control & field troubleshooting.      

Supervisor / Technician, Other

Professional Profile Experienced Design/Drafting Piping/Process/Process Safety for Design Competition, FEED, Detail Drawing using Auto CAD/ MicroStation for Oil and Gas Onshore/Offshore and Petrochemical Project. Several times working for Prepare data material to input CQS system. Piping Quality Control, Piping Inspector, Piping test package/Punch List at fabrication and Field Construction Career Objective I am seeking a position which will allow me to apply and enhance my skills of being SP3D Designer Piping Process/Process Safety, Piping. But it does not rule out the position of the piping test package/punch list because I have that experience. In addition, I am eager to contribute my knowledge, experience and hard work towards the success of your company and to the growth of the fast-developing field.

Drafter / Designer, Inspector

Piping Designer with 6+ years of experience in the Oil & Gas industry. Skilled in AutoCAD 2D/3D, AutoCAD Plant 3D, and 3D modeling. Strong knowledge of piping design, drafting, and field measurement, with hands-on exposure to SmartPlant 3D (SP3D), AVEVA E3D, AVEVA PDMS, and CAESAR II. Holds a Bachelor’s degree in Mechanical Engineering from Mercu Buana University. Technical Skill: AutoCAD 2&3D AutoCAD Plant 3D AVEVA PDMS AVEVA E3D (Everything 3D) Smart Plant 3D (S3D) Piping Stress Analysis (Software Caesar II) Sketchup Microsoft Office: Excel, Word, Power Point Drone Pilot (Certified) Languange : Indonesian and English

Drafter / Designer, Engineer, Other

7 years and 6 months of experience in oil and gas industry in upstream/downstream projects. Experience ranges from engineering design and fabrication engineering. Experiences in engineering design for upstream/downstream projects range from Front End Engineering to Detail Design. Familiar with and have a good understanding and practical experience with process, electrical, and safety drawing. Excellent in software and applications such as COMOS, PDMS, SPP&ID, Bocad, AutoCAD, and Microsoft Software.

Drafter / Designer

Seasoned oil and gas professional with over 17 years of hands-on experience, with a strong foundation in production enhancement and a solid track record in hydraulic workover operations. Skilled in operating and maintaining HWU systems, including well intervention, troubleshooting, and equipment handling. Known for being reliable, safety-conscious, and composed under pressure, with excellent teamwork and problem-solving abilities. Adept at adapting to dynamic field environments and contributing to efficient, high-performance operations. Committed to continuous growth and operational excellence in every role.

Supervisor / Technician

graduated in

Drafter / Designer

Committed and professional electrical, instrumentation and automation engineer familiar with standard electrical, instrumentation and automation requirements. More than twenty years experiences in proposal/tender, engineering design, procurement and project execution of electrical, instrumentation, automation control system and its construction for oil and gas, manufacturing and petrochemical industry. Strong management and leadership abilities for delegating tasks or providing instruction clearly and accurately. Prioritize, organize work and meet deadline. Strong communication skills, ability to work independently with best in team, self-motivated and ability to manage changing priorities.

Engineer, Manager

My personality is trustworthy, honest, high integrity, open minded, energetics, agile, responsible, adaptable, humorous, smart and fast learner. And my orientations are targets, benefits, outputs, outcomes and impacts for company by best quality and on time, firm but have empathetic. I love to expand my experiences by new challenge, although I have been involved in Constructions Project Management for more than 18 years, especially construction management and civil works, both in integrated buildings including MEP (Mechanical Electrical and Plumbing), as well as infrastructures, water resources and special constructions such as hospitals, SUTT, offshore radar towers, reclamation and dredging. I also have experiences for 12 years as Management Consultant for Constructions in projects related to the Indonesian government, private companies, NGOs, Grant and Loan Programs by IBRD, OECF, IDA Credit, ADB, JICA/JBIC, AusAID, etc. I can carry out in all projects process from planning/preconstruction to completed (PHO and FHO), like as the bidding process, proposals, work methods, negotiations and/or auctions, budgeting, scheduling, implementation, construction, cost control, quality control and assurance, rescheduling, equipment and man power analysis, contract changes orders, variation orders, and others activities to completed the project implementation. My main frames to implementation the projects are CTQ-HSSE (Cost, Time Schedule, Quality - Health Safety Security and Environments). Tools of CTQ that are Methods of Work, Permits to Work (PTW), site inspection, defects list, punch list, weekly meeting, and others. Tools control of HSSE that are Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA), Site Supervision, Tool box meetings (TBM), Safety morning, etc. Important things to support the implementation of CTQ-HSSE are Quality Management System (QMS) and Standard Operating Procedure (SOP). By the references standard are : ISO 9001, ISO 14001, OHSAS 18001 or ISO 45001 and SMK3. The main literature to run projects are PMBOK and others to Define, Plan, Organized, Action, Control and Close up (D'POAC-C) supported by RCSA to deal with risks, SWOT analysis for problem solving, and HIRA for Health Safety Security and Environments assurance. While the software and computer programs that I use are Microsoft Project, Microsoft Office (Excel, Power point, Word, Outlook, etc.), supported by other engineering software such as AutoCad, SketchUp, SAP2000, Etabs, etc. And now, I am looking for a new opportunity to do my best at a right company, as General Manager Construction, Project Manager, Construction Manager, Engineering Manager, Project Plan and Control, or equivalent, at anywhere.

Engineer, Manager, Superintendent

I am Mechanical Engineer with some many experience and abilties. Among them are machine maintenance, engine repair, calibration and 3D drawing. Al of that can be seen from my experience working and organization.

Engineer