Fabrication freelance

I have more than 9 years experience on Marine Consultant, Shipyard, Oil & Gas and Power Plant industry in engineering modeling design, fabrication, budgeting/cost control, and project management scope.

Engineer, Superintendent, Manager

The most potential in Quality Health Safety and Environment position starting with Field Executor until Management which have direct roles to the operation of Oil & Gas companies either International or National scale such as: PTTEP-MOGE Myanmar, Pertamina Refinery Unit V, Pertamina Hulu Kalimantan Timur (PHKT), Arabian Gulf Oil Company (AGOCO), British Petroleum, Total EP Indonesia, ExxonMobil, Chevron Indonesia Company, Virginia Indonesia Oil Company (VICO), PTTEP Thailand, Pertamina EP and Medco Energy as well as Weatherford and Scomi Oiltools as Service Company that have enriched acknowledgement of QHSE ethics, codes and standards from their daily basis through various levels (Officer, Supervisor, until Manager). For over 20 years overall period of working experiences that initiated from non-technical works, by will and opportunity, made me become involved in this technical function on Oil & Gas Operation and Exploration either Constructions or Development Projects.

Supervisor / Technician, Superintendent

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

B.Sc degree (Mechanical Engineer) Offshore Drilling Systems Rig ( New-Build/ Survey/ Inspection/ Refurbishment/ Modification/ Classification ) Engineering, Procurement & Installation Supervision (Mechanical/Piping) NORSOK / DNV / API International Projects SINGAPORE, Middle East & Caspian-Sea Shipyards (Owner/ Contractor team) Norway Work Permit Available for job Worldwide Relocate / Rotation

Superintendent, Engineer, Inspector, Manager

Mechanical engineer experienced in maintenance, inspection, training and designing fields of fluid power systems, lifting, static and rotating equipment. Passionate in 3D designing, additive manufacturing, rapid prototyping, and simulation analysis. Attained the NCEES FE mechanical exam pass and eager to obtain the professional licensure.

Engineer, Drafter / Designer

6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.

Engineer

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Bachelor's degree in Mechatronics Engineering with 15 years of extensive experience in project management across various organizational levels and portfolios. Expertise includes sub-contractor management, client interactions, and adaptability to diverse working environments. Proficient in navigating management setups, contract execution strategies, and project-specific requirements. Well-versed in government and local regulations, client-specific standards, and international best practices (DEP, ASME, API), as well as design and operational codes/standards. Demonstrated ability to effectively oversee and managing project budgets and funds, with a strong foundation in contract management and procurement.

Manager

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc… 

Manager, Superintendent

He has over 23 years of industrial experience working in energy and utilities industry performing inspection, assessment and providing specialist advice/solution, leadership and mentoring in quality, with over 17 years in the capacity of supervisor up to acting Company Site Representative (CSR). He is a Welding/NDT Inspector by training, however for the most part of his career as a quality personnel, most of the time he dealt with multi disciplinary missions. His high proficiency in welding QC therefore, is strongly backed by demonstrated competencies and knowledge in other associated disciplines i.e. structural, piping, mechanical packages equipment (static and common rotating equipment), Mechanical Joints Integrity, protective coatings and vibration basics. He is also stands in as a Construction Supervisor when required, with significant contribution to the field works progress. Consistently upgrading his career where from year 2008 onwards he continued as a quality team member represented esteemed end users and EPCC such as PETRONAS, Woodside Energy, Eni, Shell, Saipem and Foster Wheeler etc. In year 2012 he was heavily involved in subsea projects performed vendor surveillance for the manufacturing of drilling and wells completion equipment such as wellheads, Christmas trees (XT) including its associated equipment and tools, Subsea Control Modules (SCM), production manifolds and pipelines (WPQT/WQT and multi joints fabrication). Extensive hands on experiences in multiple disciplines and project cycles has made him versatile, adaptable to the fast track project environment, able to anticipate problems and further provide solutions in wider perspective besides make timely decisions in daily activities relevant to the specific project. He had attained distinguished track records in delivering Quality Management System (QMS) programs through his commitment towards “Do It Right First Time” and continuous improvement in numerous major projects related to hydrocarbon processing equipment and facilities ranging from greenfield development to brownfield modification (including plants reconstruction, rejuvenation, revamp and turnaround).

Inspector, Supervisor / Technician

With over 31 years of extensive experience in the Oil and Gas industry, this professional has led technical and leadership roles with renowned companies such as Esso Production, Imperial Oil, Petronas, Murphy, Talisman, and integrated services firms. Expertise spans national, regional, and international levels. Demonstrated proficiency in project management, construction execution, and contract management, including EPC, EPCI, EPCC, and oversight of Yard and onshore Construction Site activities. Successfully navigated comprehensive project phases from the bid stage, design, fabrication, onshore/sea transportation, on-site installation, hook-up, commissioning, to eventual handover. Instrumental roles have been played in diverse projects, including sophisticated offshore fixed production and compression platforms, cutting-edge floating production facilities, and live onshore plant modifications. Projects were located in various countries such as Malaysia, Singapore, Indonesia, the United Arab Emirates, Qatar, Germany, Kazakhstan, and Canada. Also a motivated Specialist Consultant with expertise in tender strategy, value engineering, and diligence consulting. Proficient in exploration, engineering, construction, and renewable energy, committed to achieving successful project outcomes.

Manager

Results-oriented professional with a passion for bridging the realms of engineering and business management. Skilled in integrating technical expertise with analytical acumen and economic decision-making to drive efficient and innovative solutions. Proven ability in optimizing processes and spearheading technical product development initiatives. Seeking a role in Engineering & Technology Management where I can leverage these strengths to contribute to organizational success.

Manager, Other

Aspiring Oil & Gas Process Engineer with 2 Years of Experience in Manufacturing Industry. Bachelor’s Degree holder in Chemical Engineering (with Honors) at Universiti Teknologi Petronas (UTP). Proven track record in improving production output capacity and product quality through process optimization, troubleshooting, and statistical analysis.

Engineer

17 years of Project & Construction Management experiences in oil and gas industry for both Greenfield/Brownfield onshore and offshore projects. 

Other

Over 6 years of experience in QA/QC Inspector (Welding/Piping/Structural) in the field of Oil and Gas Fabrication such as Offshore Wellhead Platforms, Subsea Modules & Foundation of Production Manifold, Production SSIV, Export PLEM, HUB SSIV, Deep Water SDU, Shallow Water SDU, ROPL, Suction Pile, Production FTA, MEG Pipeline FTA, Rigid Spools, etc. Earning bachelor’s degree in majoring Metallurgical Engineering and diploma degree in majoring Mechanical Engineering and certified CSWIP 3.1 (Welding Inspector), CSWIP RI Level 2, ASME VIII Division 1 Pressure Vessel, Feritscope FMP30, SonoDur 3 Portable UCI Hardness Tester, XRF Analyzer for Positive Material Identification. Avidly interesting in QA/QC Inspection for Welding/Piping/Structural with experiences inspection prior to welding, during welding and after welding such as checking preparation of base metal before welding, fit up inspection, checking parameter during welding, visual inspection after welding including checking discoloration inspection using Borescope, Hardness Test, Ferrite Test and PMI. Also having experience to witness Mechanical Testing, Metallurgical Testing, Metallography Examination, Chemical Composition, and Corrosion Testing (i.e. Sulfide Stress Corrosion Cracking based on NACE TM0316, NACE TM0177, Pitting Corrosion based on ASTM G48 Method A, Intergranular Corrosion based on ASTM A262 Method E) for Welder / Welding Operator Qualification Test, Procedure Qualification Test.

Inspector

Professional Profile Experienced Design/Drafting Piping/Process/Process Safety for Design Competition, FEED, Detail Drawing using Auto CAD/ MicroStation for Oil and Gas Onshore/Offshore and Petrochemical Project. Several times working for Prepare data material to input CQS system. Piping Quality Control, Piping Inspector, Piping test package/Punch List at fabrication and Field Construction Career Objective I am seeking a position which will allow me to apply and enhance my skills of being SP3D Designer Piping Process/Process Safety, Piping. But it does not rule out the position of the piping test package/punch list because I have that experience. In addition, I am eager to contribute my knowledge, experience and hard work towards the success of your company and to the growth of the fast-developing field.

Drafter / Designer, Inspector

• Where in my presence and experience can be of a real strength for competitive environment. • A growth oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute to wards organizations success.

Engineer, Drafter / Designer, Superintendent, Supervisor / Technician

Highly experienced Electrical Engineer with 24 years of expertise in Conceptual Design, Pre-FEED, FEED, Detailed Engineering Design, EPC, Project Management, and Field Construction within the Oil & Gas industry, encompassing both Offshore and Onshore Projects. Proven ability to lead and coordinate engineering teams, optimize design for efficiency and safety, and ensure project deliverable align with specifications and international standards.

Engineer, Drafter / Designer

* An experienced engineer with a strong interest in projects that require both conceptual and analytical thinking * Fully committed to exploring new challenges in unfamiliar environments * Always eager to learn new skills and techniques from anyone, regardless of their industry * Open-minded and adaptable, with a passion for continuous growth and improvement

Engineer

Project Engineer with over 14 years of experience, specializing in large-scale oil and gas offshore/subsea EPCI. In-depth experience and knowledge for any project phases (Engineering, Procurement, Fabrication, Offshore Installation, Hook-up, and Commissioning). Holding a master's in Subsea Engineering, I currently apply my expertise in leading innovative Offshore Carbon Capture and Utilization projects at Saipem Indonesia. Having excellent interpersonal communication skills in multi-cultural/multi-national environments. My focus remains on driving growth in the oil and gas sector while embracing challenges for greater responsibility.

Engineer, Supervisor / Technician, Superintendent

Domingo V. Granado Jr. is a seasoned Piping Designer and Engineer with extensive experience in high-profile projects for elite EPCM companies. Notable contributions include work on RasGas Exxon Mobil and QatarGas ExxonMobil LNG Process Trains with Chiyoda Corporation, GLNG Upstream Project with SANTOS Australia at Fluor Philippines, and Chevron's Bibiyana Gas Field with Foster Wheeler Thailand. At Mitsubishi Heavy Industries, he played a key role in major chemical projects such as ExxonMobil's and SABIC Gulf Coast Growth Ventures, North American Growth and Baytown Expansion Projects. His practical Field Piping Engineer experience includes Petronas Sabah Ammonia and Urea Project and Qatargas Exxonmobil LNG Project. Spearheaded facility engineering and project management for industrial and commercial projects with Achievers Business Group Inc.

Engineer, Drafter / Designer

Piping Designer with 6+ years of experience in the Oil & Gas industry. Skilled in AutoCAD 2D/3D, AutoCAD Plant 3D, and 3D modeling. Strong knowledge of piping design, drafting, and field measurement, with hands-on exposure to SmartPlant 3D (SP3D), AVEVA E3D, AVEVA PDMS, and CAESAR II. Holds a Bachelor’s degree in Mechanical Engineering from Mercu Buana University. Technical Skill: AutoCAD 2&3D AutoCAD Plant 3D AVEVA PDMS AVEVA E3D (Everything 3D) Smart Plant 3D (S3D) Piping Stress Analysis (Software Caesar II) Sketchup Microsoft Office: Excel, Word, Power Point Drone Pilot (Certified) Languange : Indonesian and English

Drafter / Designer, Engineer, Other