Public Job Postings

Support project execution of decarbonization scope providing related process engineering input in the system review, identification and implementation of opportunities to improve emissions. Work requires coordination both with lead and junior engineers to support multidiscipline execution. Specific activities as part of the role include Capacity check HYSYS Process-related simulation modelling Identification of bottlenecks Preparation and Review of PFD, P&IDs Support cost estimation activities Equipment sizing Vendor interface It is required for candidates to demonstrate clear understanding on emissions. Being able to estimate emission would be preferable

Senior Commissioning Engineer o Minimum of 10 years’ experience in Plant Operation in Precom & Commissioning works. Experience in Refinery Plant is an advantages o Experience in as Commissioning Lead Engineer is an advantage o Experience in Acid Gas Oxidizer or Refinery Field is an advantage. o Experience in Smooth Start-Up Program Implementation preparation and involvement in OIM, FIE , CRA, ORA & health checks. o Experience in preparing Plant Systemization, Pre-commissioning, Startup & Commissioning and Operating Manual Procedures Preparation. o Experience in Field Pre-commissioning, Plant Start Up & Commissioning including pre-startup review (PSSR), JSA preparation, system walk down, punch list closure, etc. o Able to prepare and establish schedule and man power requirement and machinery/tools planning for precom/comm activities. o Able to comply environmental, quality & safety requirements at site o Responsible in monitoring progress and meeting the project datelines. o Possesses good communication & people skills o Able to lead and coordinate with multi disciplines, vendors and Clients. o Willing to travel and station at site o Good command in English (spoken and written). Requirements o Degree in Chemical Engineering is a must. Job Descriptions o Making improvements to and offering advice about operational procedures; o Scheduling and co-ordinating work to tight deadlines; o Ensuring that equipment works to its specification; o Creating and carrying out test procedures; o Investigating problems, diagnosing/repairing faults; o Troubleshooting; o Liaising with installation/project engineers; o Supervising engineering and technical staff; o Writing reports and documentation; o Providing technical support; o Ensuring safe working conditions; o Training maintenance and operative staff where appropriate. o Support Process Engineering works

Job Responsibilities: -  Participate in ITB study and prepare bid specifications.  Establish standard and concept for the work to comply with job requirements.  Lead and Involve in various engineering stage such as Feasibility Study, Basic Engineering Design and Detail Engineering.  Preparation Process Drawings such as Process Flow Scheme, Piping & Instrumentation Diagram, Equipment data sheet, Instrument data sheet and other deliverables, Flare System Sizing, other process calculations including BOG calculation rate.  Interface with other internal disciplines such as Mechanical, Piping, Instrument.  Liaise with clients and vendors for technical issues and to define project scope.  Planning, scheduling, quality control of designated project.  Support pre-commissioning and commissioning activities.  Able to resolve technical issues.  Accountable for success completion of assigned engineering tasks. Job Requirements: -  Candidate must possess at least Degree in Chemical Engineering.  Min. 10 years of process engineering/design experience with Engineering Company in Oil & Gas industries. Experience in LNG, Ethylene Plant and Silicone Plant Design is an advantage.  Familiar with international codes and standard (especially API, PTS (PETRONAS Technical Standard), SHELL DEP, etc.)  Having previous experience in Greenfield, Brownfield and plant modification projects.  Able to work in team and possess excellent interpersonal, communication, presentation and writing skills.  Experiences in process simulation (PRO II & HYSYS), flare network simulation (FLARENET), gas radiation (FLARESIM), Pipenet, Heat Exchanger sizing and rating, etc.  Project Lead experience and participated in process design reviews and safety study workshops such as P&ID Review, HAZOP, HAZID, IPF, RAM, HFE, SOE, Alarm Rationalization, Plot Plan Review, 3D Model Review.  Knowledge in AUTOCAD & SPPID is a plus.  PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).  Good command in English (spoken and written).  Willing to travel and station at site.

Job Responsibilities: • Manage projects as Lead Engineer and be responsible for the proper and timely execution of projects ensuring the Department quality management system and any project specific contractual requirements are met. • Performing basic and detail design for static equipment such as pressure vessel, storage tank, heat exchanger and package equipment. • Responsible for cost, schedule, quality and budget control.  • Responsible for issue of all mechanical deliverable documents such as engineering specification, mechanical datasheet, requisition, technical evaluation, engineering drawing and also reviewing vendor document. • Ensures effective communications among other engineering disciplines, project management and Client teams. • Participates in department meetings, project status meetings and is responsible for correct reporting of amongst other project status, progress, delays, change notices and management, lessons learned and close-out. • Responsible to provide information to other discipline such as loading data, construction bill of quantity, electric load and also field work instruction. • Responsible to perform proposals work which involve man hour and schedule estimates related to the mechanical static scope of work. • Provide leadership skills with ability to lead and guide Junior Engineers. Job Requirements:- • Candidate must possess Degree in Mechanical Engineering background from recognized university. • At least 7-10 years working experience in oil & gas industry. • Must have thorough knowledge of static equipment ranging from vessels, heat exchangers, reactors, columns and package equipment. Furnace /fired equipment and thermal rating for shell and tube heat exchanger is an advantage. • Had a strong technical background in an engineering contracting environment with all aspects of static equipment engineering.  The understanding of the technical requirements of the project and directing others to apply this into the project is important.   • Ability to work in teams with all levels and vendors and possess excellent interpersonal, communication/presentation and report writing skills. • Able to define work scope and required resource. • Able to operate pressure vessel design software such as PV Elite, Codecal, etc. • Well verse in static equipment design code and standard such as API, ASME codes and TEMA and client standard such as Petronas PTS and Shell DEP. • Registered with BEM (Board of Engineers Malaysia).

Responsibilities:  Responsible in pipe routing and equipment layout planning study.  Responsible in engineering design works such as plot plan, key plan, piping arrangement, construction isometric and pipe support detail drawing, field fabrication part, etc.  Responsible in prepare information drawings such as civil information, nozzle orientation, vessel clip, instrument component information and process information (piping isometric for calculation of hydraulic delta-p, etc.)  Review all internal design check (IDC) documents from all disciplines.  Assist construction and commissioning activities (Field/Site works).  Liaise with clients as and when necessary.  Prepare and provide Bill of Material and Bill of Quantity for procurement and construction activities.  Capable to produce neat quality and organized piping drawing, feasible piping design, effective and smooth engineering works, and minimize error in piping design work.  Capable to complete engineering design within project schedule with minimum supervision. Requirements:  Possess Diploma in Mechanical or Material Engineering or Certificate in Mechanical Drafting.  Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.  Good knowledge in drawing preparation of Plot Plan, Key Plan, Underground and Aboveground Piping Plan, Detailed Pipe Support and Construction Isometric.  Good knowledge and ability to prepare civil information and mechanical information such as Pipe Rack, Platform Structure, Nozzle Orientation, Vessel Clip, etc.  Having previous experience handling revamp project, and/or greenfield project.  Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.  Able to work in team and possess excellent interpersonal, communication and writing skills.  Good skill in the application of Auto-Cad.  Knowledge in most commonly used software (Microstation) and able to operate 3D design software (S3D/CADWorx/PDMS/E3D) are essential for this positions.  PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).  Good command in English and Bahasa Malaysia (spoken and written).

Minimum Degree Holder in Science Subjects or equivalent and registered with DOSH as Certified Hygiene Technician II, with minimum 5 years of experience and at least conducted 5 projects in providing LEV Assessment services in oil and gas services.

Ingénieur calcul de structure béton armé maitrisant Arche ossature + Autocad (5 ans d'XP)

Dessinateur projeteur béton armé coffrage ferraillage maitrisant Révit (Min 3 ans d'XP)

Ingénieur calcul tuyauterie (3 mois Lyon) / Pas de description de poste

Description Pour accompagner le développement de l'un de nos clients dans le secteur de l'énergie, nous sommes à la recherche d'un Ingénieur Lead projets. Nous recherchons pour ce poste un professionnel confirmé qui pourra être mobilisé en tant que Project Engineering Lead sur des projets. L’engineering lead est le référent technique du projet, en interne et vis-à-vis du Client. Il/Elle est responsable d’identifier les risques projet relatifs au design. Il/Elle supporte le chef de projet en étant force de proposition et en effectuant un reporting régulier. Le poste est rattaché hiérarchiquement à la Direction de l’Ingénierie et fonctionnellement au Chef de Projet sur lequel il est affecté. À ce titre, les responsabilités sont les suivantes : Coordonner une équipe d’ingénieurs projets pluridisciplinaires Superviser les activités ingénieries sous-traitées Gérer le planning et participe à la gestion du budget ingénierie du projet Valider l’ensemble des délivrables techniques, en s’assurant du respect des spécifications et codes applicables, ainsi que du respect des processus ingénierie de l’entreprise Responsabilités 1. Management de l’ingénierie du projet Organiser, coordonner et contrôler l’équipe ingénierie du projet (interne ou sous-traitée) afin d’émettre l’ensemble des livrables projets S’assurer de l’adéquation de l’équipe ingénierie du projet avec la charge, identifier les besoins additionnels d’expertises à mobiliser si besoin Piloter les réunions hebdomadaire ingénierie du projet, ainsi que les revues techniques (revues de design, HAZID…), et la réalisation des actions associées Contrôler la qualité des activités ingénierie du projet, et la conformité avec les normes, spécifications Client, exigences QHSE, et processus internes applicables Identifier de façon pro-active les éventuels changements contractuels et préparer les dossiers de support associés Manager les demande de clarifications/déviations techniques avec le Client et les sous-traitants. Résoudre les difficultés techniques, en s’appuyant sur son équipe, pour proposer des solutions pratiques, et en collaborant avec le management de projet et avec le Client Coordonner les activités ingénierie nécessaires pour les achats (réquisitions techniques, spécifications matériaux, support pré/post commande) Coordonner les activités d’ingénierie liées aux tests de qualification prévus dans le cadre du projet Assurer une interface avec l’équipe construction, afin de s’assurer de la bonne prise en compte du design dans les activités de fabrication. Revoir les documents clés de construction, et participer à la résolution de problèmes d’ingénierie associés à la fabrication et à l’installation Préparer un reporting régulier vers le management de projet et vers la direction ingénierie, intégrant les aspects coûts et planning Identifier les risques ingénierie du projet, et piloter les plans d’actions associés Participer au REX des projets Contribuer à l’entretien et au développement de la culture QHSE de l’entreprise L’Ingénieur Projets (Lead) pourra être affecté sur d’autres missions d’ingénierie en fonction de plan de charge du département 2. Participation à la mise à jour des outils du département engineering Assister la Direction de l’Ingénierie pour la mise en place et la tenue à jour d’une base d’outils ingénierie Qualifications Expérience : Diplôme en sciences de l’ingénieur, spécialisation thermique et/ou mécanique Expérience de 7 ans minimum en Ingénierie sur des projets clés en main Expérience Oil & Gas souhaitée Expérience pipeline souhaitée Savoirs : Connaissance des codes et standards propres à l’industrie pétrolière Impliqué en matière de Qualité, Santé, Sécurité et environnement Anglais : lu, écrit, parlé (niveau courant) Logiciel : la connaissance de Abaqus (3D) et Solidworks est un plus